TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)

A Kit consisting of only basic parts. We also recommend the Standard Plus Kit with additional correction parts.

We recommend this 60mm Lift Suspension Kit for the New Jimny JB74 for off-road driving. These Adjustable Shock Absorbers and Coil Springs are specifically designed by TANIGUCHI for new Jimny (2018-ON). Both computer simulations and off-road, high speed and city driving tests were conducted numerous times. Made in Japan.

The front coil springs are set low on the spring rate producing effective front traction. Dual-rate coil springs on the rear suppress the roll and enable a comfortable ride. Shock Absorbers can be adjusted in 14 steps, enabling settings to suit various driving styles. This Suspension Kit shows the best off-road performance. 

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

Please note that these products are designed for a RHD (right-hand drive) Jimny, but it may be possible to install them for a LHD (left-hand drive) as well. If there is a difference in height between the left and right, please consider swapping left and right coil springs and use the coil spacers. However, this has not been tested and may not work on all models. This product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

A) 60 mm Lift Standard Suspension Kit (143,800 JPY) comes with Coil Springs, Shock Absorbers, and 50mm Extended Brake Hoses.
B) 60 mm Standard Plus Suspension Kit (171,900 JPY) comes with two of Caster Correction Bushes 5.0, Rear Panhard Rod Relocation Bracket, and Offset Stabilizer Relocation Bracket added to the Standard Kit.
C) 60 mm Lift Premium Suspension Kit (209,000 JPY) comes with Front and Rear Adjustable Panhard Rods added to the Standard Plus Kit.

[ Required ]
- Remove front cross member or replace with Drop Cross Member

[ Recommended ]
- Caster Correction Bushes 5.0 (almost necessary)
- Rear Panhard Rod Relocation Bracket
- Front and rear adjustable Panhard rods

[ Required in some cases ]
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
- Stabilizer Relocation Bracketlock etc.)

 

Coil Springs

free length (mm)

spring rate (N/mm)

FR 419 18.0

FL 

404

18.0

RR

376.5

23.0 / 27.0

RL

362

23.0 / 27.0

 Shock Absorbers

 

front

rear

extended length (mm)

475

525

compressed length (mm)

297

331

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI
Lift height: front 55mm, rear 65mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 60mm Lift Standard Suspension Kit Jimny JB74 (2018-ON)

通常価格 ¥143,800 ¥0 単価 あたり

A Kit consisting of only basic parts. We also recommend the Standard Plus Kit with additional correction parts.

We recommend this 60mm Lift Suspension Kit for the New Jimny JB74 for off-road driving. These Adjustable Shock Absorbers and Coil Springs are specifically designed by TANIGUCHI for new Jimny (2018-ON). Both computer simulations and off-road, high speed and city driving tests were conducted numerous times. Made in Japan.

The front coil springs are set low on the spring rate producing effective front traction. Dual-rate coil springs on the rear suppress the roll and enable a comfortable ride. Shock Absorbers can be adjusted in 14 steps, enabling settings to suit various driving styles. This Suspension Kit shows the best off-road performance. 

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

Please note that these products are designed for a RHD (right-hand drive) Jimny, but it may be possible to install them for a LHD (left-hand drive) as well. If there is a difference in height between the left and right, please consider swapping left and right coil springs and use the coil spacers. However, this has not been tested and may not work on all models. This product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

A) 60 mm Lift Standard Suspension Kit (143,800 JPY) comes with Coil Springs, Shock Absorbers, and 50mm Extended Brake Hoses.
B) 60 mm Standard Plus Suspension Kit (171,900 JPY) comes with two of Caster Correction Bushes 5.0, Rear Panhard Rod Relocation Bracket, and Offset Stabilizer Relocation Bracket added to the Standard Kit.
C) 60 mm Lift Premium Suspension Kit (209,000 JPY) comes with Front and Rear Adjustable Panhard Rods added to the Standard Plus Kit.

[ Required ]
- Remove front cross member or replace with Drop Cross Member

[ Recommended ]
- Caster Correction Bushes 5.0 (almost necessary)
- Rear Panhard Rod Relocation Bracket
- Front and rear adjustable Panhard rods

[ Required in some cases ]
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
- Stabilizer Relocation Bracketlock etc.)

 

Coil Springs

free length (mm)

spring rate (N/mm)

FR 419 18.0

FL 

404

18.0

RR

376.5

23.0 / 27.0

RL

362

23.0 / 27.0

 Shock Absorbers

 

front

rear

extended length (mm)

475

525

compressed length (mm)

297

331

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI
Lift height: front 55mm, rear 65mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.