TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)

We highly recommend these 60mm / 2.5" Lift Coil Springs for the Jimny JB74 for off-road driving!
The front weight of the JB74 Jimny (2018-ON) is not as heavy as the JB43 (1998-2018). It is easy for JB74 Jimny front wheels to slip on off-road, especially when climbing uphill. Considering this, the front coils are set low on the spring rate producing effective front traction. Dual-rate coil springs on the rear suppress the roll and enable a comfortable ride.
Designed by TANIGUCHI and CHUHATSU and tested numerous times to ensure off or on-road comfort. These coil springs combined with TANIGUCHI 2-3 inch lift Shock Absorbers show the best off-road performance. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

These products are designed for a RHD (right hand drive) Jimny, but it may be possible to install them for LHD(left hand drive) as well. If there is a difference in height between the left and right, please consider swapping left and right coil springs and use the coil spacers. However, this has not been tested and may not work on all models. Please note this product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

Comes in a set of four Coil Springs (49,200 JPY), or 60mm Suspension Kits (144,300 - 209,500 JPY).

[ Required ]
- Longer shock absorbers
- Remove front cross member or replace with Drop Cross Member
- 50mm Extended Brake Hoses
- Caster Correction Bushes 5.0, or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Bracket (both recommended)
- Front Adjustable Panhard Rod

[ Required in some cases ]
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

free length (mm)

spring rate (N/mm)

FR 419 18.0

FL 

404

18.0

RR

376.5

23.0 / 27.0

RL

362

23.0 / 27.0

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 55mm, rear 65mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
"Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier which has manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)

Normale prijs ¥49,200 ¥0 Eenheidsprijs per

We highly recommend these 60mm / 2.5" Lift Coil Springs for the Jimny JB74 for off-road driving!
The front weight of the JB74 Jimny (2018-ON) is not as heavy as the JB43 (1998-2018). It is easy for JB74 Jimny front wheels to slip on off-road, especially when climbing uphill. Considering this, the front coils are set low on the spring rate producing effective front traction. Dual-rate coil springs on the rear suppress the roll and enable a comfortable ride.
Designed by TANIGUCHI and CHUHATSU and tested numerous times to ensure off or on-road comfort. These coil springs combined with TANIGUCHI 2-3 inch lift Shock Absorbers show the best off-road performance. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

These products are designed for a RHD (right hand drive) Jimny, but it may be possible to install them for LHD(left hand drive) as well. If there is a difference in height between the left and right, please consider swapping left and right coil springs and use the coil spacers. However, this has not been tested and may not work on all models. Please note this product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

Comes in a set of four Coil Springs (49,200 JPY), or 60mm Suspension Kits (144,300 - 209,500 JPY).

[ Required ]
- Longer shock absorbers
- Remove front cross member or replace with Drop Cross Member
- 50mm Extended Brake Hoses
- Caster Correction Bushes 5.0, or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Bracket (both recommended)
- Front Adjustable Panhard Rod

[ Required in some cases ]
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

free length (mm)

spring rate (N/mm)

FR 419 18.0

FL 

404

18.0

RR

376.5

23.0 / 27.0

RL

362

23.0 / 27.0

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 55mm, rear 65mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
"Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier which has manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.