TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)

These 75mm / 3" Lift Coil Springs are specifically designed for 1300 Jimny JB43 using manufacturing technology "SASC". When the suspension contracts, the coils just only bend slightly. When the maximum bump, there is no contact between the lines, so there is no impact or noise. It was developed paying special attention to all the springs' length, rate, and wire diameters. Both computer simulations and off-road, high speed and city driving tests were conducted numerous times.
When used with TANIGUCHI shock absorber, AS8 or SUPER LONG, excellent stability and comfort are realized from off-road to city driving. ABS wiring extension stay is included. Made in Japan.

SASC (Side Action Spring by CHUHATSU); More than a hundred points on the SASC, unlike conventional vertical stroke, have been tested and analyzed in simulation and in vehicles on the road. This in depth analyses has created an action spring that has lower friction which greatly improves driving comfort and steering performance.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original one.

These products are designed for a RHD (right hand drive) Jimny, but it may be possible to install them for LHD(left hand drive) as well. If there is a difference in height between the left and right, please consider swapping left and right coil springs and use the coil spacers. However, this has not been tested and may not work on all models. Please note this product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

Comes in a set of four Coil Springs (46,000 JPY), Suspension Kit (111,600 - 269,700 JPY).

[ Required ]
- Longer shock absorbers
- 50mm extended brake hoses
- Caster Correction Bushes or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
- Caster Correction Bushes or Caster Corrected Radius Arms
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)

free length (mm)

spring rate (N/mm)

FR 432 23.5

FL 

413

23.5

RR

408

23.4

RL

369

23.4

Applicable vehicles: Jimny (1998-2018) JB43 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 75mm, rear 75mm
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)

Normale prijs ¥46,000 ¥0 Eenheidsprijs per

These 75mm / 3" Lift Coil Springs are specifically designed for 1300 Jimny JB43 using manufacturing technology "SASC". When the suspension contracts, the coils just only bend slightly. When the maximum bump, there is no contact between the lines, so there is no impact or noise. It was developed paying special attention to all the springs' length, rate, and wire diameters. Both computer simulations and off-road, high speed and city driving tests were conducted numerous times.
When used with TANIGUCHI shock absorber, AS8 or SUPER LONG, excellent stability and comfort are realized from off-road to city driving. ABS wiring extension stay is included. Made in Japan.

SASC (Side Action Spring by CHUHATSU); More than a hundred points on the SASC, unlike conventional vertical stroke, have been tested and analyzed in simulation and in vehicles on the road. This in depth analyses has created an action spring that has lower friction which greatly improves driving comfort and steering performance.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original one.

These products are designed for a RHD (right hand drive) Jimny, but it may be possible to install them for LHD(left hand drive) as well. If there is a difference in height between the left and right, please consider swapping left and right coil springs and use the coil spacers. However, this has not been tested and may not work on all models. Please note this product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

Comes in a set of four Coil Springs (46,000 JPY), Suspension Kit (111,600 - 269,700 JPY).

[ Required ]
- Longer shock absorbers
- 50mm extended brake hoses
- Caster Correction Bushes or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
- Caster Correction Bushes or Caster Corrected Radius Arms
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)

free length (mm)

spring rate (N/mm)

FR 432 23.5

FL 

413

23.5

RR

408

23.4

RL

369

23.4

Applicable vehicles: Jimny (1998-2018) JB43 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 75mm, rear 75mm
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.