TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)
TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)
TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)
TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)
TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)
TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)
TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)
This Cross Member designed by TANIGUCHI and PLOT, offers better clearance of the propeller shaft and cross member when the Jimny is lifted because of its unique design.
The original Suzuki cross member hits the propeller shaft when the Jimny is lifted. And if you use an aftermarket drop bracket to fix this problem while keeping the original cross member, the ground clearance is reduced by 50-70mm, which isn't favorable for off-road driving. However, with this product, you can keep the performance for off-road driving since the clearance is reduced by only 15mm.

One more option to solve this clearance problem is to remove the original cross member. However, it reduces the rigidity of the car body and slightly deteriorates off-road driving performance. In addition, it does not pass the strict car inspection in Japan because it reduces safety in the event of an accident. It is possible to drive your Jimny without this cross member, but we recommend this product for your off-road drive performance and especially for your safety.
It can be used for both A/T and M/T. Recommended for Jimny which is lifted more than 50mm, but good for less than 50mm as well. It is compatible with front shock absorbers with a maximum length of 500mm or less. Most aftermarket front shock absorbers' maximum length, which lift your Jimny 75cm / 3 inches, are shorter than 480mm. So, this product will fit most Jimny models which are lifted less than 75mm / 3 inches. Made in Japan.

Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI, PLOT
Material: Steel
Finish: Cationic electrode position coating
Mounting: Moderate (some experience and tools required)

About TANIGUCHI and PLOT:
"Off-Road Service TANIGUCHI" is Japan's number one Jimny custom parts supplier which has manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
PLOT was founded in 1980 and is known for its high quality custom parts for motorcycles, which exhibit functional beauty and provide high performance. In recent years, they have been enthusiastically producing vehicle parts as well, and their products will enhance your driving performance and your enjoyment of the outdoors and leisure time.

TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)

Normale prijs ¥28,500 ¥0 Eenheidsprijs per
This Cross Member designed by TANIGUCHI and PLOT, offers better clearance of the propeller shaft and cross member when the Jimny is lifted because of its unique design.
The original Suzuki cross member hits the propeller shaft when the Jimny is lifted. And if you use an aftermarket drop bracket to fix this problem while keeping the original cross member, the ground clearance is reduced by 50-70mm, which isn't favorable for off-road driving. However, with this product, you can keep the performance for off-road driving since the clearance is reduced by only 15mm.

One more option to solve this clearance problem is to remove the original cross member. However, it reduces the rigidity of the car body and slightly deteriorates off-road driving performance. In addition, it does not pass the strict car inspection in Japan because it reduces safety in the event of an accident. It is possible to drive your Jimny without this cross member, but we recommend this product for your off-road drive performance and especially for your safety.
It can be used for both A/T and M/T. Recommended for Jimny which is lifted more than 50mm, but good for less than 50mm as well. It is compatible with front shock absorbers with a maximum length of 500mm or less. Most aftermarket front shock absorbers' maximum length, which lift your Jimny 75cm / 3 inches, are shorter than 480mm. So, this product will fit most Jimny models which are lifted less than 75mm / 3 inches. Made in Japan.

Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI, PLOT
Material: Steel
Finish: Cationic electrode position coating
Mounting: Moderate (some experience and tools required)

About TANIGUCHI and PLOT:
"Off-Road Service TANIGUCHI" is Japan's number one Jimny custom parts supplier which has manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
PLOT was founded in 1980 and is known for its high quality custom parts for motorcycles, which exhibit functional beauty and provide high performance. In recent years, they have been enthusiastically producing vehicle parts as well, and their products will enhance your driving performance and your enjoyment of the outdoors and leisure time.