TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)
TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)
TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)
TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)
TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)
TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)
TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)
TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)

These adjustable shock absorbers by TANIGUCHI and KYB were specifically designed for the 1998 - 2018 JB43 Jimny because of its slightly higher compression-side priority, and they work well with TANIGUCHI's SUPER SOLVE coil springs or 2-3" lift springs of any kind. They were developed and tested numerous times paying special attention to suspension travel, rubber bush hardness, and the damping force against the suspension velocity.  These shock absorbers combined with TANIGUCHI 3"/75mm Lift Coil Springs SUPER SOLVE, show the best performance.  

The damping force is adjustable in 8 steps, enabling settings to suit various driving styles and are the most popular aftermarket shock absorbers for Jimny in Japan. Low-pressure gas type, twin-tube, piston diameter is 30mm. Made in Japan.


Required

- 50mm extended brake hoses

- Longer coil springs (2-3"/50-75mm lift)

- Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms

  

Recommended

- Rear Adjustable Panhard Rod, or Rear Panhard Rod Correction Brackets (both recommended)

- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit

- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

 

Required in some cases

- Propeller shaft spacer

- Stabilizer correction item (Offset Stabilizer Bracket etc.)

 

 

front

rear

extended length (mm)

475

525

compressed length (mm)

295

327

 

Applicable vehicles: Jimny (1998-2018) JB43, 33, 23

Brand: TANIGUCHI, KYB

Mounting: Professional (professional installation required)

TANIGUCHI Adjustable Shock Absorbers AS8 2-3"/50-75mm lift Jimny (98-18)

Regular price ¥73,700 ¥0 Unit price per

These adjustable shock absorbers by TANIGUCHI and KYB were specifically designed for the 1998 - 2018 JB43 Jimny because of its slightly higher compression-side priority, and they work well with TANIGUCHI's SUPER SOLVE coil springs or 2-3" lift springs of any kind. They were developed and tested numerous times paying special attention to suspension travel, rubber bush hardness, and the damping force against the suspension velocity.  These shock absorbers combined with TANIGUCHI 3"/75mm Lift Coil Springs SUPER SOLVE, show the best performance.  

The damping force is adjustable in 8 steps, enabling settings to suit various driving styles and are the most popular aftermarket shock absorbers for Jimny in Japan. Low-pressure gas type, twin-tube, piston diameter is 30mm. Made in Japan.


Required

- 50mm extended brake hoses

- Longer coil springs (2-3"/50-75mm lift)

- Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms

  

Recommended

- Rear Adjustable Panhard Rod, or Rear Panhard Rod Correction Brackets (both recommended)

- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit

- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

 

Required in some cases

- Propeller shaft spacer

- Stabilizer correction item (Offset Stabilizer Bracket etc.)

 

 

front

rear

extended length (mm)

475

525

compressed length (mm)

295

327

 

Applicable vehicles: Jimny (1998-2018) JB43, 33, 23

Brand: TANIGUCHI, KYB

Mounting: Professional (professional installation required)