This product corrects the mounting position of the front Panhard rod and steering rod by moving each upwards. It provides significant improvements to steering precision and creates smooth handling for your lifted Jimny.
When lifting your Jimny, the use of the Adjustable Panhard Rod eliminates lateral displacement. But this alone does not solve the angle problem, and steering operability and riding comfort remain degraded. Using this kit enhances steering comfort so that you won't even feel that the vehicle is lifted. Made in Japan.
The Kit comes with Front Panhard Rod Relocation Bracket and Steering Correction Rod. You can add Adjustable Front Panhard Rod. Also, you can add SHOWA GARAGE X-Large Adjustable Front Bump Stops, or MASTERPIECE 50mm Front Extended Bump Stop Spacers.
* We recommend this kit only when the Jimny is lifted more than 3 inches / 75mm.
* Please correct the steering rod and Panhard rod at the same time. Correcting only one of them deteriorates operability.
* It is OK for lifted Jimny to use only this Kit in some cases. However, to achieve the highest results of proper left and right alignment for any lifted Jimny, we recommend using both this kit and the Adjustable Front Panhard Rod regardless of the amount of lift.
* The bracket may touch the vehicle frame, especially in off-road driving. Therefore, it is necessary to limit suspension travel by about 50 mm. MASTERPIECE 50mm Front Extended Bump Stop Spacers or SHOWA GARAGE X-Large Adjustable Front Bump Stops are recommended.
* Only suitable for RHD (right-hand drive). We don't have the LHD model.
* These are high-quality and reliable products, but the steering rod's pillow balls (spherical bearings) are slightly less durable and may have a bit shorter lifespan than the original SUZUKI steering rod.
Applicable vehicles: Jimny (2018-present) JB74 RHD (right-hand drive)
Brand: RA-NO’S
Mounting: Professional (professional installation required)
About RA-NO'S:
RA-NO'S is a very small factory, and the owner alone produces 4x4 parts that are very durable and practical. The owner loves off-road racing and is also active as a racing machine builder and racing driver.
RA-NO'S Front Suspension and Steering Correction Kit Jimny JB74 (2018-ON)
This product corrects the mounting position of the front Panhard rod and steering rod by moving each upwards. It provides significant improvements to steering precision and creates smooth handling for your lifted Jimny.
When lifting your Jimny, the use of the Adjustable Panhard Rod eliminates lateral displacement. But this alone does not solve the angle problem, and steering operability and riding comfort remain degraded. Using this kit enhances steering comfort so that you won't even feel that the vehicle is lifted. Made in Japan.
The Kit comes with Front Panhard Rod Relocation Bracket and Steering Correction Rod. You can add Adjustable Front Panhard Rod. Also, you can add SHOWA GARAGE X-Large Adjustable Front Bump Stops, or MASTERPIECE 50mm Front Extended Bump Stop Spacers.
* We recommend this kit only when the Jimny is lifted more than 3 inches / 75mm.
* Please correct the steering rod and Panhard rod at the same time. Correcting only one of them deteriorates operability.
* It is OK for lifted Jimny to use only this Kit in some cases. However, to achieve the highest results of proper left and right alignment for any lifted Jimny, we recommend using both this kit and the Adjustable Front Panhard Rod regardless of the amount of lift.
* The bracket may touch the vehicle frame, especially in off-road driving. Therefore, it is necessary to limit suspension travel by about 50 mm. MASTERPIECE 50mm Front Extended Bump Stop Spacers or SHOWA GARAGE X-Large Adjustable Front Bump Stops are recommended.
* Only suitable for RHD (right-hand drive). We don't have the LHD model.
* These are high-quality and reliable products, but the steering rod's pillow balls (spherical bearings) are slightly less durable and may have a bit shorter lifespan than the original SUZUKI steering rod.
Applicable vehicles: Jimny (2018-present) JB74 RHD (right-hand drive)
Brand: RA-NO’S
Mounting: Professional (professional installation required)
About RA-NO'S:
RA-NO'S is a very small factory, and the owner alone produces 4x4 parts that are very durable and practical. The owner loves off-road racing and is also active as a racing machine builder and racing driver.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.