*** These products are the manufacturer's stock and the orders may take several days or more to ship.
A simple heavy-duty bumper that is designed by the off-road experience and technology of RV4 Wild Goose. This product is a sturdy bumper because the 3.2mm-thick steel has several reinforcing plates inside. Since this bumper is very durable and greatly improves the departure angle and function, it is recommended for those who love hard off-road adventures. Made in Japan. (Only Pintle Hook is made in Taiwan.)
This Bumper is very strong and can be used as high lift jack points and you can even step on it. Note: Please use the jack at the point between the mounting stays - do not use it at the side end of this bumper.
- Sold separately Taillights can be installed (photo #5, a set of left and right for 13,100 JPY). The taillights are located at about 2 cm depth inside the bumper and they are hard to break even if the bumper hits a rock or something hard. These Taillights have electrical connectors for Jimny JB74.
- 9mm-thick mounting stays have 70mm diameter holes which can be used as tow points. Also, they have 19mm diameter holes to which you can install tow shackles. In addition, these tow points are located at higher places, so they are easy to use.
- Also sold separately are the Pintle Hook with high tensile bolt kit (17,500 JPY) or Trailer Hitch Bracket with high tensile bolt kit (19,900 JPY) which are designed to match this bumper and can be installed easily with just bolts.
- Make it even more stylish by adding the optional Rear Side Garnishes (photo #4, a set of left and right for 6,100 JPY). Drilling is required for installation. Matte black paint stainless steel. These Rear Side Garnishes are designed for JB64, but compatible with JB74 as well
- The spare tire cannot be installed together, so remove it or use the separately-sold Adjustable Spare Tire Relocation Bracket (photo #6, 24,200 JPY). The height of the spare tire can be adjusted in 2 steps. License Plate Relocation Kit (photo #7, 9,100 JPY) may be required as well.
Rear Bumper only for 72,400 JPY, a set of two taillights for 13,100 JPY, a Pintle Hook with bolts for 17,500 JPY, a Trailer Hitch Bracket with bolts for 19,900 JPY, Rear Side Garnishes for 6,100 JPY, Adjustable Spare Tire Relocation Bracket for 24,200 JPY, and License Plate Relocation Kit for 9,100 JPY.
* Cutting the vehicle body slightly may be required in some cases.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: RV4 Wild Goose
Material: 3.2mm-thick steel (bumper), 9.0mm-thick steel (mounting stay)
Weight: 13.2kg (bumper only)
Finish: Semi-matte black cationic electrode coating
Mounting: Moderate (some experience and tools required)
About RV4 WILD GOOSE:
RV4 Wild Goose is a pioneer in the Japanese 4x4 industry in Japan and they manufacture various off-road parts which are durable and practical. Also, they hold a lot of off-road events, publish off-road magazines, and have off-road driving courses.
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
*** These products are the manufacturer's stock and the orders may take several days or more to ship.
A simple heavy-duty bumper that is designed by the off-road experience and technology of RV4 Wild Goose. This product is a sturdy bumper because the 3.2mm-thick steel has several reinforcing plates inside. Since this bumper is very durable and greatly improves the departure angle and function, it is recommended for those who love hard off-road adventures. Made in Japan. (Only Pintle Hook is made in Taiwan.)
This Bumper is very strong and can be used as high lift jack points and you can even step on it. Note: Please use the jack at the point between the mounting stays - do not use it at the side end of this bumper.
- Sold separately Taillights can be installed (photo #5, a set of left and right for 13,100 JPY). The taillights are located at about 2 cm depth inside the bumper and they are hard to break even if the bumper hits a rock or something hard. These Taillights have electrical connectors for Jimny JB74.
- 9mm-thick mounting stays have 70mm diameter holes which can be used as tow points. Also, they have 19mm diameter holes to which you can install tow shackles. In addition, these tow points are located at higher places, so they are easy to use.
- Also sold separately are the Pintle Hook with high tensile bolt kit (17,500 JPY) or Trailer Hitch Bracket with high tensile bolt kit (19,900 JPY) which are designed to match this bumper and can be installed easily with just bolts.
- Make it even more stylish by adding the optional Rear Side Garnishes (photo #4, a set of left and right for 6,100 JPY). Drilling is required for installation. Matte black paint stainless steel. These Rear Side Garnishes are designed for JB64, but compatible with JB74 as well
- The spare tire cannot be installed together, so remove it or use the separately-sold Adjustable Spare Tire Relocation Bracket (photo #6, 24,200 JPY). The height of the spare tire can be adjusted in 2 steps. License Plate Relocation Kit (photo #7, 9,100 JPY) may be required as well.
Rear Bumper only for 72,400 JPY, a set of two taillights for 13,100 JPY, a Pintle Hook with bolts for 17,500 JPY, a Trailer Hitch Bracket with bolts for 19,900 JPY, Rear Side Garnishes for 6,100 JPY, Adjustable Spare Tire Relocation Bracket for 24,200 JPY, and License Plate Relocation Kit for 9,100 JPY.
* Cutting the vehicle body slightly may be required in some cases.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: RV4 Wild Goose
Material: 3.2mm-thick steel (bumper), 9.0mm-thick steel (mounting stay)
Weight: 13.2kg (bumper only)
Finish: Semi-matte black cationic electrode coating
Mounting: Moderate (some experience and tools required)
About RV4 WILD GOOSE:
RV4 Wild Goose is a pioneer in the Japanese 4x4 industry in Japan and they manufacture various off-road parts which are durable and practical. Also, they hold a lot of off-road events, publish off-road magazines, and have off-road driving courses.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.