This product is a set of four X-Large Adjustable Bump Stops with mounting bolts to mount the Bump Stops front and rear. It is excellent for shock absorbing and a popular product that improves ride comfort and drive stability for your Jimny! This extra-large rubber bump stop is wider and 65mm longer than the original. These products are recommended for off-road racing or aggressive off-road driving.
It can be cut according to the desired effect and mounted without a drill. This product is very effective for your Jimny, protecting the vehicle body by limiting suspension travel, improving ride quality on off-road driving, shock absorption for high jumps, etc. They fit the lifted or original Jimny. These products are made by SHOWA GARAGE, a pioneer of the extended, extra-large bump stop. The material and shape have been improved many times. They are high-quality, well-tested, and well-loved in Japan.
By increasing the size significantly, the amount of compression of the bump stop is reduced, and the movement of the axle housing can be more firmly regulated. In addition to significantly increasing the shock absorption capacity, the repulsion due to the elasticity of the rubber is also reduced, and the shock absorption of the rear suspension will be very good.
There are three types: hard, soft, and super-soft. In normal cases, we recommend the super-soft type. When you are looking for comfort, the super-soft type is recommended. The super-soft type is also good for shock absorption for high jumps. We recommend using super-soft, especially for off-road driving. The hard type is recommended for those who need durability or want to limit suspension travel even more.
Comes with a set of four Bump Stops with Mounting Brackets and Bolts. This product is a set of SHOWA GARAGE X-Large Adjustable Front Bump Stops and Rear Bump Stops Type 1.
* These products are for mounting bump stops inside the front coil springs and outside the rear coil springs. They cannot be installed inside the rear coil springs.
* Also, Figure 8 Bump Stops (for JB74, JB43) are available for those who require extra shock absorption. However, if you love extreme off-road adventure, we recommend using both the Figure 8 Bump Stop and the X-Large Adjustable Bump Stop together.
Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: SHOWA GARAGE
Material: Rubber
Length: 125mm (Suzuki original is 60mm)
Diameter: 65mm (Suzuki original is 45 mm)
Hardness: hard 70, soft 60, super soft 50 (Suzuki original is 70)
Mounting: Moderate (some experience and tools required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
SHOWA GARAGE X-Large Adjustable Front & Rear Bump Stops Jimny
This product is a set of four X-Large Adjustable Bump Stops with mounting bolts to mount the Bump Stops front and rear. It is excellent for shock absorbing and a popular product that improves ride comfort and drive stability for your Jimny! This extra-large rubber bump stop is wider and 65mm longer than the original. These products are recommended for off-road racing or aggressive off-road driving.
It can be cut according to the desired effect and mounted without a drill. This product is very effective for your Jimny, protecting the vehicle body by limiting suspension travel, improving ride quality on off-road driving, shock absorption for high jumps, etc. They fit the lifted or original Jimny. These products are made by SHOWA GARAGE, a pioneer of the extended, extra-large bump stop. The material and shape have been improved many times. They are high-quality, well-tested, and well-loved in Japan.
By increasing the size significantly, the amount of compression of the bump stop is reduced, and the movement of the axle housing can be more firmly regulated. In addition to significantly increasing the shock absorption capacity, the repulsion due to the elasticity of the rubber is also reduced, and the shock absorption of the rear suspension will be very good.
There are three types: hard, soft, and super-soft. In normal cases, we recommend the super-soft type. When you are looking for comfort, the super-soft type is recommended. The super-soft type is also good for shock absorption for high jumps. We recommend using super-soft, especially for off-road driving. The hard type is recommended for those who need durability or want to limit suspension travel even more.
Comes with a set of four Bump Stops with Mounting Brackets and Bolts. This product is a set of SHOWA GARAGE X-Large Adjustable Front Bump Stops and Rear Bump Stops Type 1.
* These products are for mounting bump stops inside the front coil springs and outside the rear coil springs. They cannot be installed inside the rear coil springs.
* Also, Figure 8 Bump Stops (for JB74, JB43) are available for those who require extra shock absorption. However, if you love extreme off-road adventure, we recommend using both the Figure 8 Bump Stop and the X-Large Adjustable Bump Stop together.
Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: SHOWA GARAGE
Material: Rubber
Length: 125mm (Suzuki original is 60mm)
Diameter: 65mm (Suzuki original is 45 mm)
Hardness: hard 70, soft 60, super soft 50 (Suzuki original is 70)
Mounting: Moderate (some experience and tools required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.