TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)
TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)
TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)
TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)
TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)
TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)
TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)
TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)
TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)

*** There is an additional shipping cost to ship this product to certain countries, including Australia, UAE, and Saudi Arabia due to oversize.
*** This product is made-to-order. The orders will take a few weeks to ship.

Simple, high quality, and durable stainless bumper. Has turn signal light mounting frames and Jimny original turn signal lights can be reinstalled. Made in Japan.
Comes with two caps. The side ends of the lower cross member where the original bumper was installed can be cut and the caps put on them as illustrated in the photos.

A Steel Model is also available for 16,500 JPY.
You can add TANIGUCHI Recovery Tow Hooks as well. Red paint steel type for 3,800 JPY, or a set of two red paint steel types for 7,500 JPY. Stainless steel type for 6,200 JPY, or a set of two stainless steel types for 12,200 JPY.

*For JA51, JB31, SJ410, SJ413, or samurai, it may be necessary to make a two-inch-long cut in the shackle base in order to install this product. Cutting the shackle bases will likely weaken it, so after installation, welding the cut part is recommended. However, this has only ever been tested on one model and may not work on all models.
* Installing this together with the Reinforcement Stays which reinforce the mounting positions of this Bumper is also recommended. (two stays for 6,200 JPY)
* This product is made-to-order. The orders will take a few weeks to ship.

Applicable vehicles: Jimny (1981-1995) JA51, 71, 11, JB31, SJ40, 30
Brand: TANIGUCHI
Material: Stainless steel
Finish: Black paint
Mounting: Moderate (some experience and tools required)
Professional (professional installation required) for SJ40, JA51, JB31, SJ410, SJ413, and SAMURA.

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI Stainless Steel Front Bumper Bar Jimny (1981-1995)

Regular price ¥31,800 ¥0 Unit price per

*** There is an additional shipping cost to ship this product to certain countries, including Australia, UAE, and Saudi Arabia due to oversize.
*** This product is made-to-order. The orders will take a few weeks to ship.

Simple, high quality, and durable stainless bumper. Has turn signal light mounting frames and Jimny original turn signal lights can be reinstalled. Made in Japan.
Comes with two caps. The side ends of the lower cross member where the original bumper was installed can be cut and the caps put on them as illustrated in the photos.

A Steel Model is also available for 16,500 JPY.
You can add TANIGUCHI Recovery Tow Hooks as well. Red paint steel type for 3,800 JPY, or a set of two red paint steel types for 7,500 JPY. Stainless steel type for 6,200 JPY, or a set of two stainless steel types for 12,200 JPY.

*For JA51, JB31, SJ410, SJ413, or samurai, it may be necessary to make a two-inch-long cut in the shackle base in order to install this product. Cutting the shackle bases will likely weaken it, so after installation, welding the cut part is recommended. However, this has only ever been tested on one model and may not work on all models.
* Installing this together with the Reinforcement Stays which reinforce the mounting positions of this Bumper is also recommended. (two stays for 6,200 JPY)
* This product is made-to-order. The orders will take a few weeks to ship.

Applicable vehicles: Jimny (1981-1995) JA51, 71, 11, JB31, SJ40, 30
Brand: TANIGUCHI
Material: Stainless steel
Finish: Black paint
Mounting: Moderate (some experience and tools required)
Professional (professional installation required) for SJ40, JA51, JB31, SJ410, SJ413, and SAMURA.

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.

Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.

Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.

Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.

Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.

Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.

* Please check the FAQ page or our policy pages for further information before purchasing.