*** This product is the manufacturer's stock and the order will usually take one week to ship.
A set of simple and thin bumpers that retains the look of Jimny's original ones. Comes with a Skid Plate. The approach angle and the departure angle are larger and your Jimny gets a more off-road vehicle look.
SUZUKI's original fog lights and tail lights can be installed. You can add two aftermarket fog lights which are the same shape as genuine SUZUKI fog lights and have the same quality for 7,300 JPY. Some international license plates may be able to be mounted on this Bumper. Comes with LED license plate lights.
Comes with Front and Rear Bumpers and a Skid Plate (Silver Color Anodized Aluminum type) for 143,700 JPY. Black Color Painted Aluminum Skid Plate or a #400 polished finish Stainless Steel Skid Plate is also available for an additional 2,200 JPY.
You don't need to remove or relocate the spare tire with this bumper if it is the original tire (195/80R15). If your tire is larger than the original one, the Spare Tire Relocation Stays (15,300 JPY), which move the spare tire 40-80mm upward, are required. Unfortunately, we don't have enough test data, but the Right-Upward Relocation Bracket (23,700 JPY, with two anti-vibration rubbers) which moves the spare tire 60-110mm upward may be required if your spare tire is much larger than the original one. The SHOWA GARAGE Spare Tire Upward Relocation Bracket which moves the spare tire 106mm upward is also recommended.
You can add 9mm High-Bridge First Front Recovery Tow Points as well. A left-side Tow Point for 10,200 JPY, a right-side Tow Point for 11,400 JPY, or a set of left and right Points for 21,400 JPY. Also, you can add 9mm High-Bridge First Rear Recovery Tow Points. One Tow Point for 10,200 JPY, two Tow points for 20,300 JPY. TANIGUCHI Rear Tow Points may also be compatible with this Rear Bumper as the photo shows. However, trimming slightly may be required in some cases. Also, this has only ever been tested on one model of Jimny and may not work on all models.
* These Bumpers are not painted. They are not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Please note that we've received reports that European license plates are too large and it is a bit tricky to mount them on this Rear Bumper.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* This Front Bumper has no holes for original headlight washers but is easy to drill the holes yourself since this is made of ABS.
* If an original muffler is installed, a rear tow point cannot be installed on the right side and can be installed on the left side only.
Applicable vehicles: Jimny (2018-present) JB74
Brand: High-Bridge First
Material: ABS
Mounting: Moderate (some experience and tools required)
About High-Bridge First:
High-Bridge First is a parts supplier that has gained momentum in the Jimny industry in Japan in recent years. Products based on the experiences of staff who have won many races are very popular.
A set of simple and thin bumpers that retains the look of Jimny's original ones. Comes with a Skid Plate. The approach angle and the departure angle are larger and your Jimny gets a more off-road vehicle look.
SUZUKI's original fog lights and tail lights can be installed. You can add two aftermarket fog lights which are the same shape as genuine SUZUKI fog lights and have the same quality for 7,300 JPY. Some international license plates may be able to be mounted on this Bumper. Comes with LED license plate lights.
Comes with Front and Rear Bumpers and a Skid Plate (Silver Color Anodized Aluminum type) for 143,700 JPY. Black Color Painted Aluminum Skid Plate or a #400 polished finish Stainless Steel Skid Plate is also available for an additional 2,200 JPY.
You don't need to remove or relocate the spare tire with this bumper if it is the original tire (195/80R15). If your tire is larger than the original one, the Spare Tire Relocation Stays (15,300 JPY), which move the spare tire 40-80mm upward, are required. Unfortunately, we don't have enough test data, but the Right-Upward Relocation Bracket (23,700 JPY, with two anti-vibration rubbers) which moves the spare tire 60-110mm upward may be required if your spare tire is much larger than the original one. The SHOWA GARAGE Spare Tire Upward Relocation Bracket which moves the spare tire 106mm upward is also recommended.
You can add 9mm High-Bridge First Front Recovery Tow Points as well. A left-side Tow Point for 10,200 JPY, a right-side Tow Point for 11,400 JPY, or a set of left and right Points for 21,400 JPY. Also, you can add 9mm High-Bridge First Rear Recovery Tow Points. One Tow Point for 10,200 JPY, two Tow points for 20,300 JPY. TANIGUCHI Rear Tow Points may also be compatible with this Rear Bumper as the photo shows. However, trimming slightly may be required in some cases. Also, this has only ever been tested on one model of Jimny and may not work on all models.
* These Bumpers are not painted. They are not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Please note that we've received reports that European license plates are too large and it is a bit tricky to mount them on this Rear Bumper.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* This Front Bumper has no holes for original headlight washers but is easy to drill the holes yourself since this is made of ABS.
* If an original muffler is installed, a rear tow point cannot be installed on the right side and can be installed on the left side only.
Applicable vehicles: Jimny (2018-present) JB74
Brand: High-Bridge First
Material: ABS
Mounting: Moderate (some experience and tools required)
About High-Bridge First:
High-Bridge First is a parts supplier that has gained momentum in the Jimny industry in Japan in recent years. Products based on the experiences of staff who have won many races are very popular.
HIGH-BRIDGE FIRST Bumpers with Skid Plate Jimny JB74 (2018-ON)
Regular price
¥143,700
*** This product is the manufacturer's stock and the order will usually take one week to ship.
A set of simple and thin bumpers that retains the look of Jimny's original ones. Comes with a Skid Plate. The approach angle and the departure angle are larger and your Jimny gets a more off-road vehicle look.
SUZUKI's original fog lights and tail lights can be installed. You can add two aftermarket fog lights which are the same shape as genuine SUZUKI fog lights and have the same quality for 7,300 JPY. Some international license plates may be able to be mounted on this Bumper. Comes with LED license plate lights.
Comes with Front and Rear Bumpers and a Skid Plate (Silver Color Anodized Aluminum type) for 143,700 JPY. Black Color Painted Aluminum Skid Plate or a #400 polished finish Stainless Steel Skid Plate is also available for an additional 2,200 JPY.
You don't need to remove or relocate the spare tire with this bumper if it is the original tire (195/80R15). If your tire is larger than the original one, the Spare Tire Relocation Stays (15,300 JPY), which move the spare tire 40-80mm upward, are required. Unfortunately, we don't have enough test data, but the Right-Upward Relocation Bracket (23,700 JPY, with two anti-vibration rubbers) which moves the spare tire 60-110mm upward may be required if your spare tire is much larger than the original one. The SHOWA GARAGE Spare Tire Upward Relocation Bracket which moves the spare tire 106mm upward is also recommended.
You can add 9mm High-Bridge First Front Recovery Tow Points as well. A left-side Tow Point for 10,200 JPY, a right-side Tow Point for 11,400 JPY, or a set of left and right Points for 21,400 JPY. Also, you can add 9mm High-Bridge First Rear Recovery Tow Points. One Tow Point for 10,200 JPY, two Tow points for 20,300 JPY. TANIGUCHI Rear Tow Points may also be compatible with this Rear Bumper as the photo shows. However, trimming slightly may be required in some cases. Also, this has only ever been tested on one model of Jimny and may not work on all models.
* These Bumpers are not painted. They are not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Please note that we've received reports that European license plates are too large and it is a bit tricky to mount them on this Rear Bumper.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* This Front Bumper has no holes for original headlight washers but is easy to drill the holes yourself since this is made of ABS.
* If an original muffler is installed, a rear tow point cannot be installed on the right side and can be installed on the left side only.
Applicable vehicles: Jimny (2018-present) JB74
Brand: High-Bridge First
Material: ABS
Mounting: Moderate (some experience and tools required)
About High-Bridge First:
High-Bridge First is a parts supplier that has gained momentum in the Jimny industry in Japan in recent years. Products based on the experiences of staff who have won many races are very popular.
A set of simple and thin bumpers that retains the look of Jimny's original ones. Comes with a Skid Plate. The approach angle and the departure angle are larger and your Jimny gets a more off-road vehicle look.
SUZUKI's original fog lights and tail lights can be installed. You can add two aftermarket fog lights which are the same shape as genuine SUZUKI fog lights and have the same quality for 7,300 JPY. Some international license plates may be able to be mounted on this Bumper. Comes with LED license plate lights.
Comes with Front and Rear Bumpers and a Skid Plate (Silver Color Anodized Aluminum type) for 143,700 JPY. Black Color Painted Aluminum Skid Plate or a #400 polished finish Stainless Steel Skid Plate is also available for an additional 2,200 JPY.
You don't need to remove or relocate the spare tire with this bumper if it is the original tire (195/80R15). If your tire is larger than the original one, the Spare Tire Relocation Stays (15,300 JPY), which move the spare tire 40-80mm upward, are required. Unfortunately, we don't have enough test data, but the Right-Upward Relocation Bracket (23,700 JPY, with two anti-vibration rubbers) which moves the spare tire 60-110mm upward may be required if your spare tire is much larger than the original one. The SHOWA GARAGE Spare Tire Upward Relocation Bracket which moves the spare tire 106mm upward is also recommended.
You can add 9mm High-Bridge First Front Recovery Tow Points as well. A left-side Tow Point for 10,200 JPY, a right-side Tow Point for 11,400 JPY, or a set of left and right Points for 21,400 JPY. Also, you can add 9mm High-Bridge First Rear Recovery Tow Points. One Tow Point for 10,200 JPY, two Tow points for 20,300 JPY. TANIGUCHI Rear Tow Points may also be compatible with this Rear Bumper as the photo shows. However, trimming slightly may be required in some cases. Also, this has only ever been tested on one model of Jimny and may not work on all models.
* These Bumpers are not painted. They are not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Please note that we've received reports that European license plates are too large and it is a bit tricky to mount them on this Rear Bumper.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* This Front Bumper has no holes for original headlight washers but is easy to drill the holes yourself since this is made of ABS.
* If an original muffler is installed, a rear tow point cannot be installed on the right side and can be installed on the left side only.
Applicable vehicles: Jimny (2018-present) JB74
Brand: High-Bridge First
Material: ABS
Mounting: Moderate (some experience and tools required)
About High-Bridge First:
High-Bridge First is a parts supplier that has gained momentum in the Jimny industry in Japan in recent years. Products based on the experiences of staff who have won many races are very popular.
Shipping calculated at checkout.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.