*** There is an additional shipping cost to ship this product to certain countries, including Australia, the Philippines, Poland, and Israel due to oversize in some cases.
*** These products are the manufacturer's stock and the orders may take several days or more to ship.
A heavy-duty combination type bumper that is designed by the off-road experience and technology of RV4 Wild Goose. Side Bumpers, Fog Light Stay for aftermarket fog lights, SUZUKI original fog lights, Recovery Tow Shackles, winches, etc. can be installed on the main Center Bumper. It is possible to change the combination according to your taste and the situation. It is also easy to only replace any damaged parts.
It is very durable because this bumper installs to the Jimny frame in 6 places and has reinforcing plates inside as well. Also, it greatly improves the approach angle and function, so it is recommended for those who love hard off-road adventure. Made in Japan.
#1 Center Bumper (81,600 JPY)
- 3.2mm-thick steel heavy-duty off-road bumper.
- The five large holes in the lower part moderately enhance the cooling effect for the engine while also reducing the weight. These holes can be used as high lift jack points as well.
- A winch (WARN AXON55 / VRX45 / PV45) can be installed.
- You can add 42mm diameter steel Fog Light Stay with two 13mm diameter light installation holes (20,600 JPY). Easy installation on the Center Bumper with just bolts. Gives your Jimny a real off-road vehicle look and works as a brush grille guard as well.
- It has two 18mm-thick shackle brackets and you can install Recovery Tow Shackles with pin diameters of 19mm or less (two 17-mm types for 3,800JPY, or two 19mm Tiger types for 5,800 JPY). These tow points are very strong since this bumper has reinforcing plates behind the shackle brackets. In addition, these tow points are located at higher places, so they are easy to use.
- SUZUKI original fog lights can be installed by removing the round covers on both sides and using the optional Fog Light Mounting Brackets sold separately (3,000 JPY). You can add two aftermarket fog lights which are the same shape as genuine SUZUKI fog lights and have the same quality for 7,300 JPY.
- RV4 Wild Goose Offset Stabilizer Relocation Brackets can also be installed with it (8,800 JPY). Good for 2-3 lifted Jimny.
- It is also possible to install the original headlight washers.
- Please note that it is also possible to use this product on its own, but depending on the safety standards of your country, it may be required that you install the Side Bumpers together (Set of two Side Bumpers for 27,900 JPY).
- If you don't install the Side Bumper and use this Center Bumper only, it's one of the options that you can make it even more stylish by adding the optional Front Side Garnishes (Set of left and right for 7,300 JPY). Drilling is required for installation. Matte black paint stainless steel.
#2 Side Bumpers (27,900 JPY)
- Set of two 2.3mm-thick steel side protections. Easy installation on the Center Bumper with four bolts each.
- SUZUKI original fog lights can be installed by removing the round covers on both sides and using optional Fog Light Mounting Brackets sold separately. (3,000 JPY)
- Please do not use these bumpers as jack points.
Center Bumper only for 80,600 JPY. You can add a set of two Side Bumpers for 27,900 JPY, a set of left and right Front Side Garnishes for 7,300 JPY, a Fog Light Stay for 20,600 JPY, a set of two 17mm Recovery Tow Shackles for 3,800 JPY, a set of two 19mm Tiger type Recovery Tow Shackles for 5,800 JPY, SUZUKI Original Fog Light Mounting Brackets for 3,000 JPY, and RV4 Wild Goose Offset Stabilizer Relocation Brackets for 8,800 JPY.
* Winches in the photos are excluded.
* Cutting the fender liners will be required.
Applicable vehicles: Jimny (2018-present) JB74
Brand: RV4 Wild Goose
Material: 3.2mm-thick steel (center bumper), 2.3mm-thick steel (side bumper), 42mm diameter steel (light stay)
Weight: 15kg (Center Bumper), 5.6kg (set of two Side Bumpers), 2kg (Fog Light Stay)
Finish: Semi-matte black cationic electrode coating
Mounting: Moderate (some experience and tools required)
About RV4 WILD GOOSE:
RV4 Wild Goose is a pioneer in the Japanese 4x4 industry in Japan and they manufacture various off-road parts which are durable and practical. Also, they hold a lot of off-road events, publish off-road magazines, and have off-road driving courses.
RV4 WILD GOOSE Heavy-duty Steel Front Bumper type 1 Jimny JB74 (2018-ON)
*** There is an additional shipping cost to ship this product to certain countries, including Australia, the Philippines, Poland, and Israel due to oversize in some cases.
*** These products are the manufacturer's stock and the orders may take several days or more to ship.
A heavy-duty combination type bumper that is designed by the off-road experience and technology of RV4 Wild Goose. Side Bumpers, Fog Light Stay for aftermarket fog lights, SUZUKI original fog lights, Recovery Tow Shackles, winches, etc. can be installed on the main Center Bumper. It is possible to change the combination according to your taste and the situation. It is also easy to only replace any damaged parts.
It is very durable because this bumper installs to the Jimny frame in 6 places and has reinforcing plates inside as well. Also, it greatly improves the approach angle and function, so it is recommended for those who love hard off-road adventure. Made in Japan.
#1 Center Bumper (81,600 JPY)
- 3.2mm-thick steel heavy-duty off-road bumper.
- The five large holes in the lower part moderately enhance the cooling effect for the engine while also reducing the weight. These holes can be used as high lift jack points as well.
- A winch (WARN AXON55 / VRX45 / PV45) can be installed.
- You can add 42mm diameter steel Fog Light Stay with two 13mm diameter light installation holes (20,600 JPY). Easy installation on the Center Bumper with just bolts. Gives your Jimny a real off-road vehicle look and works as a brush grille guard as well.
- It has two 18mm-thick shackle brackets and you can install Recovery Tow Shackles with pin diameters of 19mm or less (two 17-mm types for 3,800JPY, or two 19mm Tiger types for 5,800 JPY). These tow points are very strong since this bumper has reinforcing plates behind the shackle brackets. In addition, these tow points are located at higher places, so they are easy to use.
- SUZUKI original fog lights can be installed by removing the round covers on both sides and using the optional Fog Light Mounting Brackets sold separately (3,000 JPY). You can add two aftermarket fog lights which are the same shape as genuine SUZUKI fog lights and have the same quality for 7,300 JPY.
- RV4 Wild Goose Offset Stabilizer Relocation Brackets can also be installed with it (8,800 JPY). Good for 2-3 lifted Jimny.
- It is also possible to install the original headlight washers.
- Please note that it is also possible to use this product on its own, but depending on the safety standards of your country, it may be required that you install the Side Bumpers together (Set of two Side Bumpers for 27,900 JPY).
- If you don't install the Side Bumper and use this Center Bumper only, it's one of the options that you can make it even more stylish by adding the optional Front Side Garnishes (Set of left and right for 7,300 JPY). Drilling is required for installation. Matte black paint stainless steel.
#2 Side Bumpers (27,900 JPY)
- Set of two 2.3mm-thick steel side protections. Easy installation on the Center Bumper with four bolts each.
- SUZUKI original fog lights can be installed by removing the round covers on both sides and using optional Fog Light Mounting Brackets sold separately. (3,000 JPY)
- Please do not use these bumpers as jack points.
Center Bumper only for 80,600 JPY. You can add a set of two Side Bumpers for 27,900 JPY, a set of left and right Front Side Garnishes for 7,300 JPY, a Fog Light Stay for 20,600 JPY, a set of two 17mm Recovery Tow Shackles for 3,800 JPY, a set of two 19mm Tiger type Recovery Tow Shackles for 5,800 JPY, SUZUKI Original Fog Light Mounting Brackets for 3,000 JPY, and RV4 Wild Goose Offset Stabilizer Relocation Brackets for 8,800 JPY.
* Winches in the photos are excluded.
* Cutting the fender liners will be required.
Applicable vehicles: Jimny (2018-present) JB74
Brand: RV4 Wild Goose
Material: 3.2mm-thick steel (center bumper), 2.3mm-thick steel (side bumper), 42mm diameter steel (light stay)
Weight: 15kg (Center Bumper), 5.6kg (set of two Side Bumpers), 2kg (Fog Light Stay)
Finish: Semi-matte black cationic electrode coating
Mounting: Moderate (some experience and tools required)
About RV4 WILD GOOSE:
RV4 Wild Goose is a pioneer in the Japanese 4x4 industry in Japan and they manufacture various off-road parts which are durable and practical. Also, they hold a lot of off-road events, publish off-road magazines, and have off-road driving courses.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.