A Blow-off Valve Kit specially designed for Jimny. This Blow-off Valve permits a stable blow-off effect during low supercharging and prevents relief during high supercharging by adopting a floating valve structure. It assists boost pressure and improves accelerator response. Easy to replace the original blow-off valve in the same place with this kit and just basic tools. Made in Japan.
This Kit comes with TRUST GReddy Blow-off Valve FV2, and TANIGUCHI Mounting Kit including hoses and stays. It is also possible to purchase only the Blow-off Valve. (35,100 JPY)
- GReddy Blowoff Valve FV2 -
This product inherits the floating valve structure that was popular in the previous model, while improving the more sophisticated design, maintainability, and reliability. By adopting a floating valve structure in which the diaphragm and valve operate independently, it is possible to achieve a valve response that exceeds that of the conventional model and a stable blow-off effect in the entire supercharging range. The floating valve mechanism prevents unnecessary opening and closing of the valve, and quick response even at low supercharging. It allows the valve to react quickly because there is no need to apply unnecessary preload to the spring. It also prevents idling problems that tend to occur with blow-off. A hand spinner that enables the preload adjustment of the spring without tools is adopted.
- Mounting Kit -
Stays and hoses specially designed for Jimny. Easy install with just basic tools.
* This Blow-off Valve can both release the blowby into the atmosphere or recirculate it with the sold-separately Return Hose Kit (3,800 JPY). In most of the areas including Japan, it is illegal to vent the blowby to the atmosphere and it is obligatory to recirculate it. Please follow the local rules when using this product.
* Some Blow-off Valves in the photos are the older models.
* These products are designed for Jimny JA22, 12, 11, 71 type 3-4 JDM (Japan Domestic Market) 660cc. Please note they don't fit JB31, 32, JA51.
* Please note this product cannot be installed on JA22 or JA12 if they have installed air locking hubs.
Applicable vehicles: Jimny (1987-1998) JA22, 12, 11, 71 type3-4 JDM (Japan Domestic Market)
Brand: TANIGUCHI, TRUST
Mounting: Moderate (some experience and tools required)
About TRUST and TANIGUCHI:
Established in 1977, TRUST is a major Japanese auto parts manufacturer. Their souped-up parts, such as turbochargers, intakes, exhausts, air filters, cooling parts, etc. are highly reliable and are favored by many enthusiasts.
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
This Kit comes with TRUST GReddy Blow-off Valve FV2, and TANIGUCHI Mounting Kit including hoses and stays. It is also possible to purchase only the Blow-off Valve. (35,100 JPY)
- GReddy Blowoff Valve FV2 -
This product inherits the floating valve structure that was popular in the previous model, while improving the more sophisticated design, maintainability, and reliability. By adopting a floating valve structure in which the diaphragm and valve operate independently, it is possible to achieve a valve response that exceeds that of the conventional model and a stable blow-off effect in the entire supercharging range. The floating valve mechanism prevents unnecessary opening and closing of the valve, and quick response even at low supercharging. It allows the valve to react quickly because there is no need to apply unnecessary preload to the spring. It also prevents idling problems that tend to occur with blow-off. A hand spinner that enables the preload adjustment of the spring without tools is adopted.
- Mounting Kit -
Stays and hoses specially designed for Jimny. Easy install with just basic tools.
* This Blow-off Valve can both release the blowby into the atmosphere or recirculate it with the sold-separately Return Hose Kit (3,800 JPY). In most of the areas including Japan, it is illegal to vent the blowby to the atmosphere and it is obligatory to recirculate it. Please follow the local rules when using this product.
* Some Blow-off Valves in the photos are the older models.
* These products are designed for Jimny JA22, 12, 11, 71 type 3-4 JDM (Japan Domestic Market) 660cc. Please note they don't fit JB31, 32, JA51.
* Please note this product cannot be installed on JA22 or JA12 if they have installed air locking hubs.
Applicable vehicles: Jimny (1987-1998) JA22, 12, 11, 71 type3-4 JDM (Japan Domestic Market)
Brand: TANIGUCHI, TRUST
Mounting: Moderate (some experience and tools required)
About TRUST and TANIGUCHI:
Established in 1977, TRUST is a major Japanese auto parts manufacturer. Their souped-up parts, such as turbochargers, intakes, exhausts, air filters, cooling parts, etc. are highly reliable and are favored by many enthusiasts.
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TRUST GReddy Blow-off Valve FV2 TANIGUCHI Kit Jimny JDM (1987-1998)
Regular price
¥52,600
A Blow-off Valve Kit specially designed for Jimny. This Blow-off Valve permits a stable blow-off effect during low supercharging and prevents relief during high supercharging by adopting a floating valve structure. It assists boost pressure and improves accelerator response. Easy to replace the original blow-off valve in the same place with this kit and just basic tools. Made in Japan.
This Kit comes with TRUST GReddy Blow-off Valve FV2, and TANIGUCHI Mounting Kit including hoses and stays. It is also possible to purchase only the Blow-off Valve. (35,100 JPY)
- GReddy Blowoff Valve FV2 -
This product inherits the floating valve structure that was popular in the previous model, while improving the more sophisticated design, maintainability, and reliability. By adopting a floating valve structure in which the diaphragm and valve operate independently, it is possible to achieve a valve response that exceeds that of the conventional model and a stable blow-off effect in the entire supercharging range. The floating valve mechanism prevents unnecessary opening and closing of the valve, and quick response even at low supercharging. It allows the valve to react quickly because there is no need to apply unnecessary preload to the spring. It also prevents idling problems that tend to occur with blow-off. A hand spinner that enables the preload adjustment of the spring without tools is adopted.
- Mounting Kit -
Stays and hoses specially designed for Jimny. Easy install with just basic tools.
* This Blow-off Valve can both release the blowby into the atmosphere or recirculate it with the sold-separately Return Hose Kit (3,800 JPY). In most of the areas including Japan, it is illegal to vent the blowby to the atmosphere and it is obligatory to recirculate it. Please follow the local rules when using this product.
* Some Blow-off Valves in the photos are the older models.
* These products are designed for Jimny JA22, 12, 11, 71 type 3-4 JDM (Japan Domestic Market) 660cc. Please note they don't fit JB31, 32, JA51.
* Please note this product cannot be installed on JA22 or JA12 if they have installed air locking hubs.
Applicable vehicles: Jimny (1987-1998) JA22, 12, 11, 71 type3-4 JDM (Japan Domestic Market)
Brand: TANIGUCHI, TRUST
Mounting: Moderate (some experience and tools required)
About TRUST and TANIGUCHI:
Established in 1977, TRUST is a major Japanese auto parts manufacturer. Their souped-up parts, such as turbochargers, intakes, exhausts, air filters, cooling parts, etc. are highly reliable and are favored by many enthusiasts.
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
This Kit comes with TRUST GReddy Blow-off Valve FV2, and TANIGUCHI Mounting Kit including hoses and stays. It is also possible to purchase only the Blow-off Valve. (35,100 JPY)
- GReddy Blowoff Valve FV2 -
This product inherits the floating valve structure that was popular in the previous model, while improving the more sophisticated design, maintainability, and reliability. By adopting a floating valve structure in which the diaphragm and valve operate independently, it is possible to achieve a valve response that exceeds that of the conventional model and a stable blow-off effect in the entire supercharging range. The floating valve mechanism prevents unnecessary opening and closing of the valve, and quick response even at low supercharging. It allows the valve to react quickly because there is no need to apply unnecessary preload to the spring. It also prevents idling problems that tend to occur with blow-off. A hand spinner that enables the preload adjustment of the spring without tools is adopted.
- Mounting Kit -
Stays and hoses specially designed for Jimny. Easy install with just basic tools.
* This Blow-off Valve can both release the blowby into the atmosphere or recirculate it with the sold-separately Return Hose Kit (3,800 JPY). In most of the areas including Japan, it is illegal to vent the blowby to the atmosphere and it is obligatory to recirculate it. Please follow the local rules when using this product.
* Some Blow-off Valves in the photos are the older models.
* These products are designed for Jimny JA22, 12, 11, 71 type 3-4 JDM (Japan Domestic Market) 660cc. Please note they don't fit JB31, 32, JA51.
* Please note this product cannot be installed on JA22 or JA12 if they have installed air locking hubs.
Applicable vehicles: Jimny (1987-1998) JA22, 12, 11, 71 type3-4 JDM (Japan Domestic Market)
Brand: TANIGUCHI, TRUST
Mounting: Moderate (some experience and tools required)
About TRUST and TANIGUCHI:
Established in 1977, TRUST is a major Japanese auto parts manufacturer. Their souped-up parts, such as turbochargers, intakes, exhausts, air filters, cooling parts, etc. are highly reliable and are favored by many enthusiasts.
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Shipping calculated at checkout.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.