Moderately suppresses the unnecessary movement of the brake master cylinder, improving the direct feeling of the brake. This product is developed by TANIGUCHI along with PLOT, which has advanced technology for motorcycle and vehicle brake parts. Jimny's exclusive master cylinder stopper has been realized. This product is recommended for those who do sport driving such as racing.
The key to the development is that Jimny is an off-road vehicle. If the master cylinder is fixed completely, the tires will lock immediately when the mud-terrain tires are installed, when wet, or when driving on dirt. Taking these into consideration, the test was repeated under various conditions from off-road to on-road. The strength around the brake booster to the bulkhead where the brake master is fixed has a great influence on braking. By reliably transmitting the pedal force to the hydraulic circuit, the effect is especially good when the brake is pressed hard. By installing this Brake Master Cylinder Stopper, the idle stroke on the pedal surface is reduced.
The effect is great, and by transmitting the pedaling force to the hydraulic circuit reliably and efficiently, it changes to a pedal touch with a direct feeling. The effect is especially great when you step on the brakes hard. The stopper block is attached via a detachable nylon collar so that the brake master will not be damaged if an accident such as a collision occurs. Special steel material is used for the stopper bracket that is fixed to the vehicle body to ensure strength.
* For those who do not drive hard so much, we recommend the cost-effective Brake Booster Bulkhead Reinforcement Plate as well. For those who want the brakes to work more strongly, we recommend installing both.
* Only suitable for RHD (right-hand drive). It might fit LHD (left-hand drive) as well but has not been tested. We don't have the LHD model.
* Due to the different specifications of the brake master cylinder, please note this product is not compatible with JB23 type 1 and JB33 if they have not installed ABS.
Applicable vehicles: Jimny (1998-2014) JB33-43 type2-8 RHD, (1998-2018) JB23
Brand: TANIGUCHI
Mounting: Professional (professional installation required)
About TANIGUCHI and PLOT:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
PLOT was founded in 1980 and is known for its high quality custom parts for motorcycles, which exhibit functional beauty and provide high performance. In recent years, they have been enthusiastically producing vehicle parts as well, and their products will enhance your driving performance and your enjoyment of the outdoors and leisure time.
TANIGUCHI Brake Master Cylinder Stopper Jimny (1998-2014, 2018)
Moderately suppresses the unnecessary movement of the brake master cylinder, improving the direct feeling of the brake. This product is developed by TANIGUCHI along with PLOT, which has advanced technology for motorcycle and vehicle brake parts. Jimny's exclusive master cylinder stopper has been realized. This product is recommended for those who do sport driving such as racing.
The key to the development is that Jimny is an off-road vehicle. If the master cylinder is fixed completely, the tires will lock immediately when the mud-terrain tires are installed, when wet, or when driving on dirt. Taking these into consideration, the test was repeated under various conditions from off-road to on-road. The strength around the brake booster to the bulkhead where the brake master is fixed has a great influence on braking. By reliably transmitting the pedal force to the hydraulic circuit, the effect is especially good when the brake is pressed hard. By installing this Brake Master Cylinder Stopper, the idle stroke on the pedal surface is reduced.
The effect is great, and by transmitting the pedaling force to the hydraulic circuit reliably and efficiently, it changes to a pedal touch with a direct feeling. The effect is especially great when you step on the brakes hard. The stopper block is attached via a detachable nylon collar so that the brake master will not be damaged if an accident such as a collision occurs. Special steel material is used for the stopper bracket that is fixed to the vehicle body to ensure strength.
* For those who do not drive hard so much, we recommend the cost-effective Brake Booster Bulkhead Reinforcement Plate as well. For those who want the brakes to work more strongly, we recommend installing both.
* Only suitable for RHD (right-hand drive). It might fit LHD (left-hand drive) as well but has not been tested. We don't have the LHD model.
* Due to the different specifications of the brake master cylinder, please note this product is not compatible with JB23 type 1 and JB33 if they have not installed ABS.
Applicable vehicles: Jimny (1998-2014) JB33-43 type2-8 RHD, (1998-2018) JB23
Brand: TANIGUCHI
Mounting: Professional (professional installation required)
About TANIGUCHI and PLOT:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
PLOT was founded in 1980 and is known for its high quality custom parts for motorcycles, which exhibit functional beauty and provide high performance. In recent years, they have been enthusiastically producing vehicle parts as well, and their products will enhance your driving performance and your enjoyment of the outdoors and leisure time.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.