*** This product is made-to-order and the orders will take a few weeks to ship.
Excellent rear trailing arms for hard off-road adventures. In contrast to the original SUZUKI radius arms made of cast iron, this product is made of 42.7mm diameter and 6mm-thick stainless steel pipes. Also, these arms branch into two arms on the axle side and have one bush added to the center of the arms. This eliminates discrepancies in the positional relationship between the axle and arms that occur when the axle is significantly twisted while driving on mogul terrain, etc. This reduces the load on the brackets and bushes, allowing extended suspension travel significantly and smoothly. Additionally, even when the suspension is extended, the load on the bushes is reduced, providing greater traction (on the ground) and dramatically improving off-road performance. They are designed to be perfect for about 75mm lifted Jimny.
Genuine SUZUKI rubber bushes, which are softer than aftermarket caster correction bushes, have been installed on these arms. During on-road driving, they ensure the same comfortable running performance as other radius arms. On top of that, they improve the movement of the suspension, have excellent road tracking, and produce reliable traction, making it a product highly recommended for hard off-road driving.
Comes with two Rear Trailing Arms with bushes.
* For those who seek caster-corrected heavy-duty rear trailing arms but don't need such extra heavy-duty arms, MASTERPIECE Caster Corrected Heavy-duty Rear Trailing Arms (56,300 JPY) are also available.
* In our experience, when an excessive load is applied, the original SUZUKI radius arms often bend and then break. However, due to the pipe shape of these products, they may suddenly break without bending. Even though these products are more durable than the original SUZUKI radius arms, please avoid dangerous off-road driving and do not neglect daily inspections.
* For your reference, in heavy off-road driving, the rear trailing arms are prone to damage on uphill slopes, and the front radius arms are prone to damage when hitting obstacles from the front. Especially, we have had some reports of the rear trailing arm of the JB74 (2018-present) failure on uphill climbs on hard off-road driving.
* Please do not install these arms on a Jimny that has been installed with coil springs or shock absorbers that are too soft. It may cause wheel judder which occurs when the tire and wheel shake and the steering wheel rattles. In addition, when sudden driving or braking force is applied, the axle may twist and cause shaking.
* This product is made-to-order and the orders will take a few weeks to ship. Please note that this product cannot be canceled after placing the order.
Applicable vehicles: Jimny (1998-present) JB74, 64, 43, 33, 23
Brand: MASTERPIECE
Material: Stainless steel
Mounting: Professional (professional installation required)
About MASTERPIECE:
A long-established Japanese 4WD parts supplier that has developed many aftermarket off-road vehicle products mainly suspension parts. They are developing parts for many off-road vehicles such as Land Cruiser, but they have also been enthusiastic about developing Jimny parts for many years. Especially their suspension parts for hard off-road adventurers have great performance even for on-road and regular city driving, and they are loved by many enthusiasts in Japan.
MASTERPIECE Off-road Rear Trailing Arms "TRACTION LINKS" for Jimny
*** This product is made-to-order and the orders will take a few weeks to ship.
Excellent rear trailing arms for hard off-road adventures. In contrast to the original SUZUKI radius arms made of cast iron, this product is made of 42.7mm diameter and 6mm-thick stainless steel pipes. Also, these arms branch into two arms on the axle side and have one bush added to the center of the arms. This eliminates discrepancies in the positional relationship between the axle and arms that occur when the axle is significantly twisted while driving on mogul terrain, etc. This reduces the load on the brackets and bushes, allowing extended suspension travel significantly and smoothly. Additionally, even when the suspension is extended, the load on the bushes is reduced, providing greater traction (on the ground) and dramatically improving off-road performance. They are designed to be perfect for about 75mm lifted Jimny.
Genuine SUZUKI rubber bushes, which are softer than aftermarket caster correction bushes, have been installed on these arms. During on-road driving, they ensure the same comfortable running performance as other radius arms. On top of that, they improve the movement of the suspension, have excellent road tracking, and produce reliable traction, making it a product highly recommended for hard off-road driving.
Comes with two Rear Trailing Arms with bushes.
* For those who seek caster-corrected heavy-duty rear trailing arms but don't need such extra heavy-duty arms, MASTERPIECE Caster Corrected Heavy-duty Rear Trailing Arms (56,300 JPY) are also available.
* In our experience, when an excessive load is applied, the original SUZUKI radius arms often bend and then break. However, due to the pipe shape of these products, they may suddenly break without bending. Even though these products are more durable than the original SUZUKI radius arms, please avoid dangerous off-road driving and do not neglect daily inspections.
* For your reference, in heavy off-road driving, the rear trailing arms are prone to damage on uphill slopes, and the front radius arms are prone to damage when hitting obstacles from the front. Especially, we have had some reports of the rear trailing arm of the JB74 (2018-present) failure on uphill climbs on hard off-road driving.
* Please do not install these arms on a Jimny that has been installed with coil springs or shock absorbers that are too soft. It may cause wheel judder which occurs when the tire and wheel shake and the steering wheel rattles. In addition, when sudden driving or braking force is applied, the axle may twist and cause shaking.
* This product is made-to-order and the orders will take a few weeks to ship. Please note that this product cannot be canceled after placing the order.
Applicable vehicles: Jimny (1998-present) JB74, 64, 43, 33, 23
Brand: MASTERPIECE
Material: Stainless steel
Mounting: Professional (professional installation required)
About MASTERPIECE:
A long-established Japanese 4WD parts supplier that has developed many aftermarket off-road vehicle products mainly suspension parts. They are developing parts for many off-road vehicles such as Land Cruiser, but they have also been enthusiastic about developing Jimny parts for many years. Especially their suspension parts for hard off-road adventurers have great performance even for on-road and regular city driving, and they are loved by many enthusiasts in Japan.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.