SHOWA GARAGE Reinforced Body Mount Basic Kit for Jimny (1998-2018)
SHOWA GARAGE Reinforced Body Mount Basic Kit for Jimny (1998-2018)
SHOWA GARAGE Reinforced Body Mount Basic Kit for Jimny (1998-2018)
SHOWA GARAGE Reinforced Body Mount Basic Kit for Jimny (1998-2018)
SHOWA GARAGE Reinforced Body Mount Basic Kit for Jimny (1998-2018)
You can enjoy sharp driving with the easy installation of these products!
These Reinforced Body Mounts eliminate the slack between the body and frame and increase the rigidity and the sense of unity between body and frame. They will make the steering response quicker and increase stability by reducing the sway and roll in the corners. They’ll give you a smooth and snappy ride.

Since they have the same hardness as the SUZUKI original ones, the transmission of vibration from the ground is almost the same. No unpleasant vibrations or sounds will be generated by installing them. By exchanging the originals for this product, the vehicle height will not change. Great products for racing, but very good for even driving in the city as well. Recommended for old Jimny models or even new ones. Also recommended for body lifted Jimny.

These products are a kit that replaces the mounts on only one side. Installing them will not require separating the body and the frame. The bumper and headlights need to be removed to install the two front mounts. But the installation of the six other mounts is very easy with just basic tools. Even by installing only these six mounts on your Jimny, you will be able to fully feel the effect. Of course, it will be ideal to change all eight mounts.

* The Full Kit, which requires separate the body and the frame to install and that comes with both side mounts, is also available. For those who are looking for even more improvements, we recommend the Full Kit. (12,700 JPY) 
* Always use a torque wrench for installation, please. Over-tightening may damage the mounts. Also, less tightening may make the nuts loosen while driving. The wrong mounting torque may lead to accidents, therefore, be sure to tighten with the specified torque.

Applicable vehicles: Jimny (1998-2018) JB43, 33, 23
Brand: SHOWA GARAGE
Mounting: Moderate (some experience and tools required)

About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.

SHOWA GARAGE Reinforced Body Mount Basic Kit for Jimny (1998-2018)

Regular price ¥7,300 ¥0 Unit price per
You can enjoy sharp driving with the easy installation of these products!
These Reinforced Body Mounts eliminate the slack between the body and frame and increase the rigidity and the sense of unity between body and frame. They will make the steering response quicker and increase stability by reducing the sway and roll in the corners. They’ll give you a smooth and snappy ride.

Since they have the same hardness as the SUZUKI original ones, the transmission of vibration from the ground is almost the same. No unpleasant vibrations or sounds will be generated by installing them. By exchanging the originals for this product, the vehicle height will not change. Great products for racing, but very good for even driving in the city as well. Recommended for old Jimny models or even new ones. Also recommended for body lifted Jimny.

These products are a kit that replaces the mounts on only one side. Installing them will not require separating the body and the frame. The bumper and headlights need to be removed to install the two front mounts. But the installation of the six other mounts is very easy with just basic tools. Even by installing only these six mounts on your Jimny, you will be able to fully feel the effect. Of course, it will be ideal to change all eight mounts.

* The Full Kit, which requires separate the body and the frame to install and that comes with both side mounts, is also available. For those who are looking for even more improvements, we recommend the Full Kit. (12,700 JPY) 
* Always use a torque wrench for installation, please. Over-tightening may damage the mounts. Also, less tightening may make the nuts loosen while driving. The wrong mounting torque may lead to accidents, therefore, be sure to tighten with the specified torque.

Applicable vehicles: Jimny (1998-2018) JB43, 33, 23
Brand: SHOWA GARAGE
Mounting: Moderate (some experience and tools required)

About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.

Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.

* Please contact us for further information before purchasing.