This product corrects the mounting position of the rear Panhard rod by about 40mm upwards and 60mm outside and improves ride comfort.
From JA22, 12, JB32 (1995-1998), Jimny changed the suspension from leaf springs to coil springs. The newly adopted 3-link rigid suspension has various advantages. However, it is also true that Jimny of this generation was still developing and was slightly low of perfection. For example, the lower mounting position of the rear Panhard rod is off the line of the radius arm and therefore, it creates unnatural behavior when driving on bumpy roads.
This is an ideal product that creates a smooth ride even in various situations for your Jimny JA22, 12, or JB32 by correcting the mounting position of the rear Panhard rod on the radius arm line. Also, a longer Panhard rod gives you more room in suspension travel and improves performance. In addition, a stable and comfortable ride is achieved even for lifted Jimny by making the angle of the Panhard rod closer to the horizontal.
* Please note this product is compatible with MASTERPIECE Extended and Adjustable Stainless Steel Panhard Rod only. By installing MASTERPIECE Extended and Adjustable Stainless Steel Panhard Rod, it will be compatible from the original Jimny to the 3-inch lifted Jimny. Some other brand adjustable Panhard rods such as those made by TANIGUCHI or SHOWA GARAGE, or original SUZUKI Panhard rod are too short to fit this product.
Applicable vehicles: Jimny (1995-1998) JA12, 22, JB32
Brand: MASTERPIECE
Mounting: Moderate (some experience and tools required)
About MASTERPIECE:
A long-established Japanese 4WD parts supplier that has developed many aftermarket off-road vehicle products mainly suspension parts. They are developing parts for many off-road vehicles such as Land Cruiser, but they have also been enthusiastic about developing Jimny parts for many years. Especially their suspension parts for hard off-road adventurers have great performance even for on-road and regular city driving, and they are loved by many enthusiasts in Japan.
MASTERPIECE Rear Panhard Rod Relocation Bracket Jimny JA22, 12, JB32 (1995-1998)
This product corrects the mounting position of the rear Panhard rod by about 40mm upwards and 60mm outside and improves ride comfort.
From JA22, 12, JB32 (1995-1998), Jimny changed the suspension from leaf springs to coil springs. The newly adopted 3-link rigid suspension has various advantages. However, it is also true that Jimny of this generation was still developing and was slightly low of perfection. For example, the lower mounting position of the rear Panhard rod is off the line of the radius arm and therefore, it creates unnatural behavior when driving on bumpy roads.
This is an ideal product that creates a smooth ride even in various situations for your Jimny JA22, 12, or JB32 by correcting the mounting position of the rear Panhard rod on the radius arm line. Also, a longer Panhard rod gives you more room in suspension travel and improves performance. In addition, a stable and comfortable ride is achieved even for lifted Jimny by making the angle of the Panhard rod closer to the horizontal.
* Please note this product is compatible with MASTERPIECE Extended and Adjustable Stainless Steel Panhard Rod only. By installing MASTERPIECE Extended and Adjustable Stainless Steel Panhard Rod, it will be compatible from the original Jimny to the 3-inch lifted Jimny. Some other brand adjustable Panhard rods such as those made by TANIGUCHI or SHOWA GARAGE, or original SUZUKI Panhard rod are too short to fit this product.
Applicable vehicles: Jimny (1995-1998) JA12, 22, JB32
Brand: MASTERPIECE
Mounting: Moderate (some experience and tools required)
About MASTERPIECE:
A long-established Japanese 4WD parts supplier that has developed many aftermarket off-road vehicle products mainly suspension parts. They are developing parts for many off-road vehicles such as Land Cruiser, but they have also been enthusiastic about developing Jimny parts for many years. Especially their suspension parts for hard off-road adventurers have great performance even for on-road and regular city driving, and they are loved by many enthusiasts in Japan.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.