2mm-thick stainless steel adjustable Panhard rods. The adjustment range is wide and supports from -3 cm to +6 cm. Axels shift sideways when you lift your Jimny, but using an adjustable Panhard rod will eliminate any lateral displacement. The rear rod is compatible with Rear Panhard Rod Relocation Bracket. Recommended to install these rods together with Rear Panhard Rod Relocation Bracket for higher performance and ride comfort.
Comes in a set of front and rear rods.
* Two types are available: types for Jimny JA12, 22 JDM (Japan Domestic Market) 660cc, or types for JB32. Please choose your Jimny type when ordering.
* When installing these products on JB32, please note that the Front Rod fits only RHD (right-hand drive) Jimny. Actually, several of our LHD (left-hand drive) customers have already installed the Front Rods, but this has not been tested by our shop or manufacturer. If this Front Rod is installed on LHD JB32, it may touch the differential. Rear Rod fits both RHD and LHD JB32. Both Front and Rear Rods fit JA22, 12.
* The bushes are made of rubber and have almost the same durability as the original SUZUKI ones. However, for those who need more reliability and durability, we also recommend Panhard Rods made by TANIGUCHI, SHOWA GARAGE for JA12, 22.
Applicable vehicles: Jimny (1995-1998) JA12, 22, JB32 RHD
Brand: MASTERPIECE
Material: Stainless steel rods, rubber bushes
Adjustable Range: from -3cm to +6cm
Material: 2mm-thick stainless steel
Mounting: Professional (professional installation required)
About MASTERPIECE:
A long-established Japanese 4WD parts supplier that has developed many aftermarket off-road vehicle products mainly suspension parts. They are developing parts for many off-road vehicles such as Land Cruiser, but they have also been enthusiastic about developing Jimny parts for many years. Especially their suspension parts for hard off-road adventurers have great performance even for on-road and regular city driving, and they are loved by many enthusiasts in Japan.
MASTERPIECE Extended and Adjustable Panhard Rods Jimny JA22, 12, JB32 (1995-1998)
2mm-thick stainless steel adjustable Panhard rods. The adjustment range is wide and supports from -3 cm to +6 cm. Axels shift sideways when you lift your Jimny, but using an adjustable Panhard rod will eliminate any lateral displacement. The rear rod is compatible with Rear Panhard Rod Relocation Bracket. Recommended to install these rods together with Rear Panhard Rod Relocation Bracket for higher performance and ride comfort.
Comes in a set of front and rear rods.
* Two types are available: types for Jimny JA12, 22 JDM (Japan Domestic Market) 660cc, or types for JB32. Please choose your Jimny type when ordering.
* When installing these products on JB32, please note that the Front Rod fits only RHD (right-hand drive) Jimny. Actually, several of our LHD (left-hand drive) customers have already installed the Front Rods, but this has not been tested by our shop or manufacturer. If this Front Rod is installed on LHD JB32, it may touch the differential. Rear Rod fits both RHD and LHD JB32. Both Front and Rear Rods fit JA22, 12.
* The bushes are made of rubber and have almost the same durability as the original SUZUKI ones. However, for those who need more reliability and durability, we also recommend Panhard Rods made by TANIGUCHI, SHOWA GARAGE for JA12, 22.
Applicable vehicles: Jimny (1995-1998) JA12, 22, JB32 RHD
Brand: MASTERPIECE
Material: Stainless steel rods, rubber bushes
Adjustable Range: from -3cm to +6cm
Material: 2mm-thick stainless steel
Mounting: Professional (professional installation required)
About MASTERPIECE:
A long-established Japanese 4WD parts supplier that has developed many aftermarket off-road vehicle products mainly suspension parts. They are developing parts for many off-road vehicles such as Land Cruiser, but they have also been enthusiastic about developing Jimny parts for many years. Especially their suspension parts for hard off-road adventurers have great performance even for on-road and regular city driving, and they are loved by many enthusiasts in Japan.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.