Simple and stylish thin bumper. The tires are exposed and your Jimny gets a more off-road vehicle look. The approach angle is larger, which improves off-road driving performance.
The TANIGUCHI Bumper and TANIGUCHI Grille are unified in design in terms of the lines of the grille opening and the shape around the headlights and fog lights. SUZUKI's original fog lights can be installed. You can add two aftermarket fog lights which are the same shape as genuine SUZUKI fog lights and have the same quality for 7,300 JPY. Make it even more stylish by adding the TANIGUCHI Skid Plate. Other skid plates such as those made by SHOWA GARAGE (14,200-16,300 JPY) may fit this Bumper but have not been tested. Made in Japan.
Bumper only for 51,800 JPY.
You can add TANIGUCHI Heavy-duty Skid Plate (black for 34,700 JPY, silver color for 31,900 JPY), or Extra Heavy-duty Skid Plate (black for 51,200 JPY, silver color for 48,400 JPY).
Also, you can add TANIGUCHI Recovery Tow Points. Red paint steel type for 3,600 JPY, or a set of two red paint steel types for 7,100 JPY. Stainless type for 6,000 JPY or a set of two stainless types for 11,900 JPY.
* This product is not painted. It is not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* Two types are available: one type has two holes for original headlight washers and one type has no holes.
* This product is on backorder and the order may take a few weeks to ship.
Applicable vehicles: Jimny (2018-present) JB74
Brand: TANIGUCHI
Material: FRP (Fibre-reinforced plastic)
Finish: White gel coating (not painted)
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI FRP Front Bumper Jimny JB74 (2018-ON)
Simple and stylish thin bumper. The tires are exposed and your Jimny gets a more off-road vehicle look. The approach angle is larger, which improves off-road driving performance.
The TANIGUCHI Bumper and TANIGUCHI Grille are unified in design in terms of the lines of the grille opening and the shape around the headlights and fog lights. SUZUKI's original fog lights can be installed. You can add two aftermarket fog lights which are the same shape as genuine SUZUKI fog lights and have the same quality for 7,300 JPY. Make it even more stylish by adding the TANIGUCHI Skid Plate. Other skid plates such as those made by SHOWA GARAGE (14,200-16,300 JPY) may fit this Bumper but have not been tested. Made in Japan.
Bumper only for 51,800 JPY.
You can add TANIGUCHI Heavy-duty Skid Plate (black for 34,700 JPY, silver color for 31,900 JPY), or Extra Heavy-duty Skid Plate (black for 51,200 JPY, silver color for 48,400 JPY).
Also, you can add TANIGUCHI Recovery Tow Points. Red paint steel type for 3,600 JPY, or a set of two red paint steel types for 7,100 JPY. Stainless type for 6,000 JPY or a set of two stainless types for 11,900 JPY.
* This product is not painted. It is not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* Two types are available: one type has two holes for original headlight washers and one type has no holes.
* This product is on backorder and the order may take a few weeks to ship.
Applicable vehicles: Jimny (2018-present) JB74
Brand: TANIGUCHI
Material: FRP (Fibre-reinforced plastic)
Finish: White gel coating (not painted)
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.