*** This product is made-to-order. The orders will take a few weeks to ship.
A thin bumper that retains the original soft image and has a simple and natural atmosphere. Excellent for off-roading, this bumper greatly improves the departure angle of the rear tires. Made in Japan.
If your Jimny is in original condition, turn signal bulbs and reversing lights are required. The reversing lights or bright LED reversing lights which come in the Kit can be installed. If using the original tail lights on the body, the reversing lights must be replaced with turn signal bulbs. Wiring is also required.
The spare tire cannot be installed together, so remove it or use the Spare Tire Relocation Bracket (19,800 JPY). This Bumper also matches the TANIGUCHI Muffler, Rear Recovery Tow Point Hooks, and Trailer Hitch Bracket.
Bumper only for 40,700 JPY. Rear Bumper Kit comes in a set of bumper, turn light bulbs, and reversing lights for 49,500 JPY. You can upgrade the reversing lights into the LED models for an additional 1,600 JPY.
And you can add TANIGUCHI LED License Plate Relocation Kit. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 16,300 JPY, plating for 17,600 JPY). You can add TANIGUCHI Recovery Tow Hooks as well. Red paint steel type for 4,900 JPY, or a set of two red paint steel types for 9,500 JPY. Stainless type for 8,100 JPY, or a set of two stainless types for 15,900 JPY.
* This product is not painted. It is not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* This product is made-to-order. The orders will take a few weeks to ship.
Applicable vehicles: Jimny (1998-2018) JB43, 33
Brand: TANIGUCHI
Material: FRP (Fibre-reinforced plastic)
Finish: White gel coating (not painted)
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
*** This product is made-to-order. The orders will take a few weeks to ship.
A thin bumper that retains the original soft image and has a simple and natural atmosphere. Excellent for off-roading, this bumper greatly improves the departure angle of the rear tires. Made in Japan.
If your Jimny is in original condition, turn signal bulbs and reversing lights are required. The reversing lights or bright LED reversing lights which come in the Kit can be installed. If using the original tail lights on the body, the reversing lights must be replaced with turn signal bulbs. Wiring is also required.
The spare tire cannot be installed together, so remove it or use the Spare Tire Relocation Bracket (19,800 JPY). This Bumper also matches the TANIGUCHI Muffler, Rear Recovery Tow Point Hooks, and Trailer Hitch Bracket.
Bumper only for 40,700 JPY. Rear Bumper Kit comes in a set of bumper, turn light bulbs, and reversing lights for 49,500 JPY. You can upgrade the reversing lights into the LED models for an additional 1,600 JPY.
And you can add TANIGUCHI LED License Plate Relocation Kit. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 16,300 JPY, plating for 17,600 JPY). You can add TANIGUCHI Recovery Tow Hooks as well. Red paint steel type for 4,900 JPY, or a set of two red paint steel types for 9,500 JPY. Stainless type for 8,100 JPY, or a set of two stainless types for 15,900 JPY.
* This product is not painted. It is not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* This product is made-to-order. The orders will take a few weeks to ship.
Applicable vehicles: Jimny (1998-2018) JB43, 33
Brand: TANIGUCHI
Material: FRP (Fibre-reinforced plastic)
Finish: White gel coating (not painted)
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.