A Heavy-duty Steel Rear Bumper which has sturdy dual steel pipes. The departure angle is larger, which improves off-road driving performance.
SUZUKI's original taillights can be installed while keeping the original rear covers. You don't need to remove or relocate the spare tire with this bumper. Suitable with even larger size spare tires up to 225/75R16 (Diameter 750mm) as well since the upper pipe is slightly bent and offset in design. The taillight box has a 3D design with 3.2mm thickness for strength, and the reinforced mounting stay is 9mm thick for extra strength. It is strong enough to step on it, so it can be used instead of the rear ladder.
Easy to install without drilling. License plate relocation may be required. TANIGUCHI Competition Muffler Type R fits with this steel rear bumper. Also, it's easy to add 6mm Tow Points. Made in Japan.
Bumper only for 68,600 JPY.
You can add an Adjustable License Plate Relocation Kit which has a slide adjustment width of about 5 cm. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 25,100 JPY, plating for 26,400 JPY). It's also possible to add a Lower License Plate Relocation Kit. (23,500 JPY)
Also, you can add TANIGUCHI 6mm Recovery Tow Points. Red paint steel type for 4,200 JPY, or a set of two red paint steel types for 8,300 JPY. Stainless type for 6,700 JPY, or a set of two stainless types for 13,200 JPY.
You can add Anti-Slip Tape (800x100mm for 1,600JPY). It is possible to stick the tape on the pipe or taillight box part where it then also helps prevent scratches when stepping.
Upper pipe: 42.7mm diameter, 2.3mm thickness
Lower pipe: 48.6mm diameter, 2.3mm thickness
* This product is on backorder and the order may take a few weeks to ship.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI
Material: Steel
Finish: Black baked powder coating
Weight: about 11.8kg (bumper: 8.0kg, mounting stays: 3.8kg)
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI Heavy-duty Steel Rear Bumper Jimny JB74 (2018-ON)
A Heavy-duty Steel Rear Bumper which has sturdy dual steel pipes. The departure angle is larger, which improves off-road driving performance.
SUZUKI's original taillights can be installed while keeping the original rear covers. You don't need to remove or relocate the spare tire with this bumper. Suitable with even larger size spare tires up to 225/75R16 (Diameter 750mm) as well since the upper pipe is slightly bent and offset in design. The taillight box has a 3D design with 3.2mm thickness for strength, and the reinforced mounting stay is 9mm thick for extra strength. It is strong enough to step on it, so it can be used instead of the rear ladder.
Easy to install without drilling. License plate relocation may be required. TANIGUCHI Competition Muffler Type R fits with this steel rear bumper. Also, it's easy to add 6mm Tow Points. Made in Japan.
Bumper only for 68,600 JPY.
You can add an Adjustable License Plate Relocation Kit which has a slide adjustment width of about 5 cm. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 25,100 JPY, plating for 26,400 JPY). It's also possible to add a Lower License Plate Relocation Kit. (23,500 JPY)
Also, you can add TANIGUCHI 6mm Recovery Tow Points. Red paint steel type for 4,200 JPY, or a set of two red paint steel types for 8,300 JPY. Stainless type for 6,700 JPY, or a set of two stainless types for 13,200 JPY.
You can add Anti-Slip Tape (800x100mm for 1,600JPY). It is possible to stick the tape on the pipe or taillight box part where it then also helps prevent scratches when stepping.
Upper pipe: 42.7mm diameter, 2.3mm thickness
Lower pipe: 48.6mm diameter, 2.3mm thickness
* This product is on backorder and the order may take a few weeks to ship.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI
Material: Steel
Finish: Black baked powder coating
Weight: about 11.8kg (bumper: 8.0kg, mounting stays: 3.8kg)
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.