Specifically designed dual-rate coil springs for Jimny JB23 by TANIGUCHI and CHUHATSU. These Dual-rate Coil Springs "ATHLETE" offer excellent comfort and cornering for both on-road and off-road. Also, controllability can be ensured even at high-speed driving on rough off-road. Our shop highly recommends these Lift Coil Springs for Jimny JB23 because they ensure a stable ride. Excellent for high-speed off-road racing as well.
Dual-rate Coil Springs are soft when there is a slight impact and become hard when there is greater impact, always allowing for a stable and smooth ride. Tested numerous times by both computer simulations and off-road, high-speed, and city driving, the results prove these Springs to be a superior product.
When used with TANIGUCHI shock absorbers, excellent stability, and comfort are realized from off-road to city driving. The durability and rust resistance are the same as those of the major automobile manufacturers' original coil springs. Made in Japan.
TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original one. Also, whether the stabilizer is installed or removed, the settings are designed to provide stable, high-performance driving both on and off-road.
Comes in a set of four coil springs (46,600 JPY). TANIGUCHI Dual-rate Lift Suspension Kits are also available (164,000 - 292,000 JPY)
* These coil springs lift your Jimny by 2.5-3 inches / 65-75mm. Also, 2-inch / 50mm Lift Coil Springs, and 3-inch / 75mm Lift Coil Springs are available.
* These products are designed for Jimny JB23 JDM (Japan Domestic Market) 660cc and JB33. It is possible to install them for some JB43 as well, but not recommended.
* This product is engineered to perform best on a JB23 or JB33 with the spare tire removed. However, even if the spare tire is left attached to the rear gate, there is no problem with driving.
[ Required ]
- Longer shock absorbers
- 50mm extended brake hoses
[ Recommended ]
- Caster Correction Bushes 5.0, or Caster Corrected Front Radius Arms (almost necessary)
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
|
free length (mm) |
spring rate (N/mm) |
|
| FR | 406.5 | 21.0 / 25.5 |
|
FL |
378.5 |
21.0 / 25.5 |
|
RR |
393.0 |
23.0 / 27.6 |
|
RL |
344.0 |
23.0 / 27.6 |
Applicable vehicles: Jimny (1998-2018) JB23 JDM, JB33 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 65-75mm, rear 65-75mm
Mounting: Professional (professional installation required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)
Specifically designed dual-rate coil springs for Jimny JB23 by TANIGUCHI and CHUHATSU. These Dual-rate Coil Springs "ATHLETE" offer excellent comfort and cornering for both on-road and off-road. Also, controllability can be ensured even at high-speed driving on rough off-road. Our shop highly recommends these Lift Coil Springs for Jimny JB23 because they ensure a stable ride. Excellent for high-speed off-road racing as well.
Dual-rate Coil Springs are soft when there is a slight impact and become hard when there is greater impact, always allowing for a stable and smooth ride. Tested numerous times by both computer simulations and off-road, high-speed, and city driving, the results prove these Springs to be a superior product.
When used with TANIGUCHI shock absorbers, excellent stability, and comfort are realized from off-road to city driving. The durability and rust resistance are the same as those of the major automobile manufacturers' original coil springs. Made in Japan.
TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original one. Also, whether the stabilizer is installed or removed, the settings are designed to provide stable, high-performance driving both on and off-road.
Comes in a set of four coil springs (46,600 JPY). TANIGUCHI Dual-rate Lift Suspension Kits are also available (164,000 - 292,000 JPY)
* These coil springs lift your Jimny by 2.5-3 inches / 65-75mm. Also, 2-inch / 50mm Lift Coil Springs, and 3-inch / 75mm Lift Coil Springs are available.
* These products are designed for Jimny JB23 JDM (Japan Domestic Market) 660cc and JB33. It is possible to install them for some JB43 as well, but not recommended.
* This product is engineered to perform best on a JB23 or JB33 with the spare tire removed. However, even if the spare tire is left attached to the rear gate, there is no problem with driving.
[ Required ]
- Longer shock absorbers
- 50mm extended brake hoses
[ Recommended ]
- Caster Correction Bushes 5.0, or Caster Corrected Front Radius Arms (almost necessary)
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
|
free length (mm) |
spring rate (N/mm) |
|
| FR | 406.5 | 21.0 / 25.5 |
|
FL |
378.5 |
21.0 / 25.5 |
|
RR |
393.0 |
23.0 / 27.6 |
|
RL |
344.0 |
23.0 / 27.6 |
Applicable vehicles: Jimny (1998-2018) JB23 JDM, JB33 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 65-75mm, rear 65-75mm
Mounting: Professional (professional installation required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.