TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)
TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)

These 75mm / 3" Lift Coil Springs are specifically designed for the 1300 Jimny JB43 using the manufacturing technology "SASC". When the suspension contracts, the coils only bend just slightly. Even with the maximum bump, there is no contact between the lines, so there is no impact or noise. It was developed by paying special attention to all the springs' length, rate, and wire diameters. Computer simulations, off-road, high-speed, and city driving tests were conducted numerous times.
When used with TANIGUCHI shock absorbers, excellent stability, and comfort are realized from off-road to city driving. ABS wiring extension stay is included. Made in Japan.

SASC (Side Action Spring by CHUHATSU); More than a hundred points on the SASC, unlike conventional vertical stroke, have been tested and analyzed in simulation and in vehicles on the road. This in depth analyses has created an action spring that has lower friction which greatly improves driving comfort and steering performance.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original one.

These products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for LHD(left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. Please note this product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

Comes in a set of four Coil Springs (45,500 JPY), Suspension Kit (111,100 - 271,600 JPY).

[ Required ]
- Longer shock absorbers
- 50mm extended brake hoses
- Caster Correction Bushes or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)

free length (mm)

spring rate (N/mm)

FR 432 23.5

FL 

413

23.5

RR

408

23.4

RL

369

23.4

Applicable vehicles: Jimny (1998-2018) JB43 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 75mm, rear 75mm
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 75mm Lift Coil Springs Jimny JB43 (1998-2018)

Regular price ¥45,500 ¥0 Unit price per

These 75mm / 3" Lift Coil Springs are specifically designed for the 1300 Jimny JB43 using the manufacturing technology "SASC". When the suspension contracts, the coils only bend just slightly. Even with the maximum bump, there is no contact between the lines, so there is no impact or noise. It was developed by paying special attention to all the springs' length, rate, and wire diameters. Computer simulations, off-road, high-speed, and city driving tests were conducted numerous times.
When used with TANIGUCHI shock absorbers, excellent stability, and comfort are realized from off-road to city driving. ABS wiring extension stay is included. Made in Japan.

SASC (Side Action Spring by CHUHATSU); More than a hundred points on the SASC, unlike conventional vertical stroke, have been tested and analyzed in simulation and in vehicles on the road. This in depth analyses has created an action spring that has lower friction which greatly improves driving comfort and steering performance.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original one.

These products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for LHD(left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. Please note this product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

Comes in a set of four Coil Springs (45,500 JPY), Suspension Kit (111,100 - 271,600 JPY).

[ Required ]
- Longer shock absorbers
- 50mm extended brake hoses
- Caster Correction Bushes or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)

free length (mm)

spring rate (N/mm)

FR 432 23.5

FL 

413

23.5

RR

408

23.4

RL

369

23.4

Applicable vehicles: Jimny (1998-2018) JB43 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 75mm, rear 75mm
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.

Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.

* Please contact us for further information before purchasing.