These adjustable shock absorbers by TANIGUCHI and KYB were specifically designed for the 1998-2018 JB43, 33, 23 Jimny, and they work well with TANIGUCHI's Coil Springs or 2-3" lift springs of any kind. KYB is the top shock absorber company in Japan which makes original shock absorbers for Jimny as well. They are ideal shock absorbers for your lifted Jimny, realized by Jimny's vast data, experience, and technology which both TANIGUCHI and KYB have.
They were developed and tested numerous times paying special attention to suspension travel, rubber bush hardness, and the damping force against the suspension velocity. These shock absorbers combined with TANIGUCHI 3"/75mm Lift Coil Springs, show the best performance.
The damping force is adjustable in 8 steps, enabling settings to suit various driving styles and are the most popular aftermarket shock absorbers for Jimny in Japan. Low-pressure gas type, twin-tube, piston diameter is 30mm. Comes in a set of four Shock Absorbers. Made in Japan.
Recommended damping settings are 4 if these shock absorbers are installed together with TANIGUCHI Coil Springs. Lower settings such as 2-3 are recommended for off-road driving, or if you like soft and comfortable driving. Higher settings such as 5-6 are recommended if a heavy roof rack is installed, or you wish to suppress roll and seek solid, sporty, and stable driving. However, some people prefer a firmer ride off-road, so it's up to you. We don't recommend 1 or 8, so please set them between 2 and 7.
TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.
[ Required ]
- 50mm extended brake hoses
- Longer coil springs (2-3"/50-75mm lift)
- Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms
[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Correction Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
|
|
front |
rear |
|
extended length (mm) |
475 |
525 |
|
compressed length (mm) |
295 |
327 |
Applicable vehicles: Jimny (1998-2018) JB43, 33, 23
Brand: TANIGUCHI, KYB
Mounting: Professional (professional installation required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI Adjustable Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)
These adjustable shock absorbers by TANIGUCHI and KYB were specifically designed for the 1998-2018 JB43, 33, 23 Jimny, and they work well with TANIGUCHI's Coil Springs or 2-3" lift springs of any kind. KYB is the top shock absorber company in Japan which makes original shock absorbers for Jimny as well. They are ideal shock absorbers for your lifted Jimny, realized by Jimny's vast data, experience, and technology which both TANIGUCHI and KYB have.
They were developed and tested numerous times paying special attention to suspension travel, rubber bush hardness, and the damping force against the suspension velocity. These shock absorbers combined with TANIGUCHI 3"/75mm Lift Coil Springs, show the best performance.
The damping force is adjustable in 8 steps, enabling settings to suit various driving styles and are the most popular aftermarket shock absorbers for Jimny in Japan. Low-pressure gas type, twin-tube, piston diameter is 30mm. Comes in a set of four Shock Absorbers. Made in Japan.
Recommended damping settings are 4 if these shock absorbers are installed together with TANIGUCHI Coil Springs. Lower settings such as 2-3 are recommended for off-road driving, or if you like soft and comfortable driving. Higher settings such as 5-6 are recommended if a heavy roof rack is installed, or you wish to suppress roll and seek solid, sporty, and stable driving. However, some people prefer a firmer ride off-road, so it's up to you. We don't recommend 1 or 8, so please set them between 2 and 7.
TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.
[ Required ]
- 50mm extended brake hoses
- Longer coil springs (2-3"/50-75mm lift)
- Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms
[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Correction Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
|
|
front |
rear |
|
extended length (mm) |
475 |
525 |
|
compressed length (mm) |
295 |
327 |
Applicable vehicles: Jimny (1998-2018) JB43, 33, 23
Brand: TANIGUCHI, KYB
Mounting: Professional (professional installation required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.