Ideal for your Jimny when lifted by 2 inches / 50mm. Highly recommended. This product stabilizes your Jimny’s steering!
When the Jimny is lifted, the caster angle is changed and the steering performance and stability deteriorates. Even the steering wheel does not recenter itself. This can easily be corrected by using Castor Correction Bushes because they correct the caster angle and improve the driving performance. It is almost necessary to correct the caster angle when Jimny is lifted more than 1 inch / 25mm.
Note 1: The correction angle of this product is 5.0°, which is ideal for Jimny when lifted by 40-60mm / 2 inches. When the Jimny is lifted 70mm / 3 inches or more, these products are good but we recommend using the separately sold Castor Correction Bushes 2.5 and these products together.
Note 2: These products can be installed on either front radius arms or rear trailing arms. One option is to install them to the lifted Jimny's rear trailing arms. When the Jimny is lifted, the angle of the rear axle also changes, so by correcting the angle with these products, it may be possible to achieve smooth movement of the rear coil springs. Most aftermarket coil springs may be designed without careful consideration of angle correction, and these products may be effective for such cases. However, if this angle is corrected too much, the angle of the propeller shaft will become too angled, which may have some disadvantages such as causing abnormal noise. In addition, the high-performance coil springs such as those engineered by TANIGUCHI and others that our shop carries are designed in advance so that there is no need to correct the angle of the rear trailing arms. If your Jimny is lifted by such high-grade coil springs, installing this product on the rear trailing arms is not necessary.
Comes in a set of two 5.0 bushes (15,400 JPY), or a set of two 5.0 and two 2.5 bushes. (28,500 JPY).
* Even though this product is designed for Suzuki Jimny, it may fit other vehicles. But please note it has only ever been tested on SUZUKI Jimny. The diameter is 52mm, the width is 60mm. Please refer to the size and photos.
* Suspension Correction Kit is also available.
* Separately sold Bush Press-fit Pitch Gauge and Bush Press-fitting Tools are useful for installing these bushes.
Applicable vehicles: Jimny (2018-present, 1998-2018, 1995-1998) JB74, 64, 43, 33, 23, 32, 22, 12
Brand: ZEAL by PRO-STAFF
Material: Polyurethane
Mounting: Professional (professional installation required)
This product is manufactured by PRO-STAFF, a pioneer of castor correction bushes. It is high quality and durable and made in Japan. For off-road adventures, we also recommend using Castor Corrected Front Radius Arms.
PRO-STAFF Castor Correction Bushes 5.0 for 2" / 50mm lifted Jimny
Ideal for your Jimny when lifted by 2 inches / 50mm. Highly recommended. This product stabilizes your Jimny’s steering!
When the Jimny is lifted, the caster angle is changed and the steering performance and stability deteriorates. Even the steering wheel does not recenter itself. This can easily be corrected by using Castor Correction Bushes because they correct the caster angle and improve the driving performance. It is almost necessary to correct the caster angle when Jimny is lifted more than 1 inch / 25mm.
Note 1: The correction angle of this product is 5.0°, which is ideal for Jimny when lifted by 40-60mm / 2 inches. When the Jimny is lifted 70mm / 3 inches or more, these products are good but we recommend using the separately sold Castor Correction Bushes 2.5 and these products together.
Note 2: These products can be installed on either front radius arms or rear trailing arms. One option is to install them to the lifted Jimny's rear trailing arms. When the Jimny is lifted, the angle of the rear axle also changes, so by correcting the angle with these products, it may be possible to achieve smooth movement of the rear coil springs. Most aftermarket coil springs may be designed without careful consideration of angle correction, and these products may be effective for such cases. However, if this angle is corrected too much, the angle of the propeller shaft will become too angled, which may have some disadvantages such as causing abnormal noise. In addition, the high-performance coil springs such as those engineered by TANIGUCHI and others that our shop carries are designed in advance so that there is no need to correct the angle of the rear trailing arms. If your Jimny is lifted by such high-grade coil springs, installing this product on the rear trailing arms is not necessary.
Comes in a set of two 5.0 bushes (15,400 JPY), or a set of two 5.0 and two 2.5 bushes. (28,500 JPY).
* Even though this product is designed for Suzuki Jimny, it may fit other vehicles. But please note it has only ever been tested on SUZUKI Jimny. The diameter is 52mm, the width is 60mm. Please refer to the size and photos.
* Suspension Correction Kit is also available.
* Separately sold Bush Press-fit Pitch Gauge and Bush Press-fitting Tools are useful for installing these bushes.
Applicable vehicles: Jimny (2018-present, 1998-2018, 1995-1998) JB74, 64, 43, 33, 23, 32, 22, 12
Brand: ZEAL by PRO-STAFF
Material: Polyurethane
Mounting: Professional (professional installation required)
This product is manufactured by PRO-STAFF, a pioneer of castor correction bushes. It is high quality and durable and made in Japan. For off-road adventures, we also recommend using Castor Corrected Front Radius Arms.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.