The lower part of Jimny's differential case is relatively strong, but the outside material is a bit thin and the differential ring gear may be damaged if it hits a rock. This product strongly protects the outside of the differential case without lowering the minimum ground clearance. Highly recommended for intense off-roading. Made in Japan.
* Welding required for installation. Welding may damage the differential oil. We recommend changing the oil after welding.
* Since it is made of steel, there may be some rust during storage. This product is not intended to be used unpainted and must be painted.
* Due to individual differences in vehicle bodies, it may be necessary to grind this product slightly before installation.
* Designed with a drain so water will be removed. However, it might be an idea to seal the top with caulking after installation to prevent water from entering.
* Depending on the suspension, it may come into contact with the Panhard rod.
Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: KUDO-JIDOSHA
Material: 4.5mm-thick steel
Mounting: Professional (professional installation required)
KUDO-JIDOSHA Differential Guard Jimny (1998-ON)
The lower part of Jimny's differential case is relatively strong, but the outside material is a bit thin and the differential ring gear may be damaged if it hits a rock. This product strongly protects the outside of the differential case without lowering the minimum ground clearance. Highly recommended for intense off-roading. Made in Japan.
* Welding required for installation. Welding may damage the differential oil. We recommend changing the oil after welding.
* Since it is made of steel, there may be some rust during storage. This product is not intended to be used unpainted and must be painted.
* Due to individual differences in vehicle bodies, it may be necessary to grind this product slightly before installation.
* Designed with a drain so water will be removed. However, it might be an idea to seal the top with caulking after installation to prevent water from entering.
* Depending on the suspension, it may come into contact with the Panhard rod.
Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: KUDO-JIDOSHA
Material: 4.5mm-thick steel
Mounting: Professional (professional installation required)
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.