MASTERPIECE Rear Panhard Rod Offset Relocation Kit Jimny JB74 (2018-ON)
MASTERPIECE Rear Panhard Rod Offset Relocation Kit Jimny JB74 (2018-ON)
MASTERPIECE Rear Panhard Rod Offset Relocation Kit Jimny JB74 (2018-ON)
MASTERPIECE Rear Panhard Rod Offset Relocation Kit Jimny JB74 (2018-ON)
MASTERPIECE Rear Panhard Rod Offset Relocation Kit Jimny JB74 (2018-ON)

This Kit is great for a Jimny that has been lifted more than 3 inches. Especially, it is ideal for a Jimny that has been lifted more than 4 inches or has been installed with thicker rear shock absorbers. This Kit comes with a bracket to be installed to the frame side and brackets to be installed to the axle side. It creates a smooth, stable ride by correcting the mounting position of the rear Panhard rod by a total of 95mm height. It is also recommended when using thicker shock absorbers whose diameters are more than 30mm since it prevents the Panhard rod from hitting the shock absorber by relocating the mounting position 12mm backward.

When your Jimny is lifted, the use of the Adjustable Panhard Rod eliminates lateral displacement. But this alone does not solve the angle problem. A Panhard rod should ideally be at an angle close to horizontal. However, if the Panhard rod has become too angled by lifting, the vehicle's body sways not only up and down but also left and right when driving on bumpy roads. It also causes various problems such as unstable behavior when rolling and applying force in the direction in which the body twists during acceleration. Especially in the rear Panhard rod, these problems appear conspicuously. This product solves this angle problem by correcting the mounting position of the rear Panhard rod by a total of 95mm and creates a smooth, stable ride even in various situations. Drilling is required.

Note 1:
In the following cases, this kit is recommended to prevent touching between the rear Panhard rod and rear shock absorbers. It is almost necessary in some cases.

1, Your Jimny has been lifted more than 4 inches (100mm).
2, Thicker coil springs have been installed.
3, Thicker shock absorbers have been installed.
4, The lower mounting position of the shock absorber has been relocated to the rear using a spacer, etc.

Note 2: It is OK for lifted Jimny to use only this Kit in some cases. However, to achieve the highest results of proper left and right alignment for any lifted Jimny, we recommend using both this kit and the Adjustable Panhard Rod regardless of the amount of lift.

Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: MASTERPIECE
Material: Steel
Color: Black painted finish
Mounting: Professional (professional installation required)

About MASTERPIECE:
A long-established Japanese 4WD parts supplier that has developed many aftermarket off-road vehicle products mainly suspension parts. They are developing parts for many off-road vehicles such as Land Cruiser, but they have also been enthusiastic about developing Jimny parts for many years. Especially their suspension parts for hard off-road adventurers have great performance even for on-road and regular city driving, and they are loved by many enthusiasts in Japan.

MASTERPIECE Rear Panhard Rod Offset Relocation Kit Jimny JB74 (2018-ON)

Regular price ¥28,500 ¥0 Unit price per

This Kit is great for a Jimny that has been lifted more than 3 inches. Especially, it is ideal for a Jimny that has been lifted more than 4 inches or has been installed with thicker rear shock absorbers. This Kit comes with a bracket to be installed to the frame side and brackets to be installed to the axle side. It creates a smooth, stable ride by correcting the mounting position of the rear Panhard rod by a total of 95mm height. It is also recommended when using thicker shock absorbers whose diameters are more than 30mm since it prevents the Panhard rod from hitting the shock absorber by relocating the mounting position 12mm backward.

When your Jimny is lifted, the use of the Adjustable Panhard Rod eliminates lateral displacement. But this alone does not solve the angle problem. A Panhard rod should ideally be at an angle close to horizontal. However, if the Panhard rod has become too angled by lifting, the vehicle's body sways not only up and down but also left and right when driving on bumpy roads. It also causes various problems such as unstable behavior when rolling and applying force in the direction in which the body twists during acceleration. Especially in the rear Panhard rod, these problems appear conspicuously. This product solves this angle problem by correcting the mounting position of the rear Panhard rod by a total of 95mm and creates a smooth, stable ride even in various situations. Drilling is required.

Note 1:
In the following cases, this kit is recommended to prevent touching between the rear Panhard rod and rear shock absorbers. It is almost necessary in some cases.

1, Your Jimny has been lifted more than 4 inches (100mm).
2, Thicker coil springs have been installed.
3, Thicker shock absorbers have been installed.
4, The lower mounting position of the shock absorber has been relocated to the rear using a spacer, etc.

Note 2: It is OK for lifted Jimny to use only this Kit in some cases. However, to achieve the highest results of proper left and right alignment for any lifted Jimny, we recommend using both this kit and the Adjustable Panhard Rod regardless of the amount of lift.

Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: MASTERPIECE
Material: Steel
Color: Black painted finish
Mounting: Professional (professional installation required)

About MASTERPIECE:
A long-established Japanese 4WD parts supplier that has developed many aftermarket off-road vehicle products mainly suspension parts. They are developing parts for many off-road vehicles such as Land Cruiser, but they have also been enthusiastic about developing Jimny parts for many years. Especially their suspension parts for hard off-road adventurers have great performance even for on-road and regular city driving, and they are loved by many enthusiasts in Japan.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.

Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.

* Please contact us for further information before purchasing.