Ideal for your Jimny when lifted by 1 inch / 25mm. Highly recommended. This product stabilizes your Jimny’s steering!
When the Jimny is lifted, the caster angle is changed and the steering performance and stability deteriorates. Even the steering wheel does not recenter itself. This can easily be corrected by using Castor Correction Bushes because they correct the caster angle and improve the driving performance. It is almost necessary to correct the caster angle when Jimny is lifted more than 1 inch / 25mm.
Note 1: The correction angle of this product is 2.5°, which is ideal for Jimny when lifted by 20-30mm / 1 inch. When the Jimny is lifted 40mm or more, we recommend using the separately sold Castor Correction Bush 5.0, or both together.
Note 2: These products can be installed on either front radius arms or rear trailing arms. One option is to install them to the lifted Jimny's rear trailing arms. When the Jimny is lifted, the angle of the rear axle also changes, so by correcting the angle with these products, it may be possible to achieve smooth movement of the rear coil springs. Most aftermarket coil springs may be designed without careful consideration of angle correction, and these products may be effective for such cases. However, if this angle is corrected too much, the angle of the propeller shaft will become too angled, which may have some disadvantages such as causing abnormal noise. In addition, the high-performance coil springs such as those engineered by TANIGUCHI and others that our shop carries are designed in advance so that there is no need to correct the angle of the rear trailing arms. If your Jimny is lifted by such high-grade coil springs, installing this product on the rear trailing arms is not necessary.
Comes in a set of two 2.5 bushes (14,200 JPY), or a set of two 5.0 and two 2.5 bushes. (28,500 JPY).
* Even though this product is designed for Suzuki Jimny, it may fit other vehicles. But please note it has only ever been tested on SUZUKI Jimny. The diameter is 52mm, the width is 60mm. Please refer to the size and photos.
* Suspension Correction Kit is also available.
* Separately sold Bush Press-fit Pitch Gauge and Bush Press-fitting Tools are useful for installing these bushes.
Applicable vehicles: Jimny (2018-present, 1998-2018, 1995-1998) JB74, 64, 43, 33, 23, 32, 22, 12
Brand: ZEAL by PRO-STAFF, TANIGUCHI
Material: Polyurethane
Mounting: Professional (professional installation required)
This product is engineered by TANIGUCHI and manufactured by PRO-STAFF, a pioneer of castor correction bushes. It is high quality and durable and made in Japan. For off-road adventures, we also recommend using Castor Corrected Front Radius Arms.
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI Castor Correction Bushes 2.5 for 1" / 25mm lifted Jimny
Ideal for your Jimny when lifted by 1 inch / 25mm. Highly recommended. This product stabilizes your Jimny’s steering!
When the Jimny is lifted, the caster angle is changed and the steering performance and stability deteriorates. Even the steering wheel does not recenter itself. This can easily be corrected by using Castor Correction Bushes because they correct the caster angle and improve the driving performance. It is almost necessary to correct the caster angle when Jimny is lifted more than 1 inch / 25mm.
Note 1: The correction angle of this product is 2.5°, which is ideal for Jimny when lifted by 20-30mm / 1 inch. When the Jimny is lifted 40mm or more, we recommend using the separately sold Castor Correction Bush 5.0, or both together.
Note 2: These products can be installed on either front radius arms or rear trailing arms. One option is to install them to the lifted Jimny's rear trailing arms. When the Jimny is lifted, the angle of the rear axle also changes, so by correcting the angle with these products, it may be possible to achieve smooth movement of the rear coil springs. Most aftermarket coil springs may be designed without careful consideration of angle correction, and these products may be effective for such cases. However, if this angle is corrected too much, the angle of the propeller shaft will become too angled, which may have some disadvantages such as causing abnormal noise. In addition, the high-performance coil springs such as those engineered by TANIGUCHI and others that our shop carries are designed in advance so that there is no need to correct the angle of the rear trailing arms. If your Jimny is lifted by such high-grade coil springs, installing this product on the rear trailing arms is not necessary.
Comes in a set of two 2.5 bushes (14,200 JPY), or a set of two 5.0 and two 2.5 bushes. (28,500 JPY).
* Even though this product is designed for Suzuki Jimny, it may fit other vehicles. But please note it has only ever been tested on SUZUKI Jimny. The diameter is 52mm, the width is 60mm. Please refer to the size and photos.
* Suspension Correction Kit is also available.
* Separately sold Bush Press-fit Pitch Gauge and Bush Press-fitting Tools are useful for installing these bushes.
Applicable vehicles: Jimny (2018-present, 1998-2018, 1995-1998) JB74, 64, 43, 33, 23, 32, 22, 12
Brand: ZEAL by PRO-STAFF, TANIGUCHI
Material: Polyurethane
Mounting: Professional (professional installation required)
This product is engineered by TANIGUCHI and manufactured by PRO-STAFF, a pioneer of castor correction bushes. It is high quality and durable and made in Japan. For off-road adventures, we also recommend using Castor Corrected Front Radius Arms.
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.