*** This product is the manufacturer's stock and the order may take several days or more to ship.
*** This product has been discontinued and is limited in stock.
This product corrects the mounting position of the front Panhard rod and steering rod by moving each 55mm upwards. It provides significant improvements to steering precision and creates smooth handling for your lifted Jimny.
When lifting your Jimny, the use of the Adjustable Panhard Rod eliminates lateral displacement. But this alone does not solve the angle problem, and steering operability and riding comfort remain degraded. Using this kit enhances steering comfort so that you won't even feel that the vehicle is lifted. Made in Japan.
The Kit comes with Front Panhard Rod Relocation Bracket, RA-NO'S Adjustable Front Panhard Rod, Steering Correction Rod, and Bump Travel Limited Blocks.
* We recommend this kit only when the Jimny is lifted more than 60mm.
* Please correct the steering rod and Panhard rod at the same time. Correcting only one of them deteriorates operability.
* An Adjustable Panhard Rod that is about 40mm shorter than the original is included. The TANIGUCHI Adjustable Panhard Rod is too long to use.
* Only suitable for RHD (right-hand drive). We don't have the LHD model.
* The ball joint in the rod end of the steering rod for this kit uses a highly accurate pillow ball. However, the durability of this pillow ball may be less than the original SUZUKI ball joints due to the nature of the product. The pillow ball is consumable, so regular replacements might be required. A Replacement Pillow Ball is also available.
* We also recommend adding a Rubber Boot for the Pillow Ball. The rubber boot is effective in protecting the ball joint; however, please note that it does not guarantee complete protection. The rubber boot is also consumable and not covered by a warranty.
* Although a special tool is required, we also recommend greasing the pillow ball regularly.
Applicable vehicles: Jimny (1998-2018) JB43, 33, 23 RHD (right-hand drive)
Brand: RA-NO’S
Mounting: Professional (professional installation required)
About RA-NO'S:
RA-NO'S is a very small factory, but they produce 4x4 parts that are very durable and practical. The owner loves off-road racing and is also active as a racing machine builder and racing driver. Recently, they have been actively working on ECU remapping for various vehicle models. Their remapped ECUs, which are analyzed down to the last detail and have been meticulously remapped, have been highly praised by many enthusiasts.
RA-NO'S Front Suspension and Steering Correction Kit Jimny (1998-2018)
*** This product is the manufacturer's stock and the order may take several days or more to ship.
*** This product has been discontinued and is limited in stock.
This product corrects the mounting position of the front Panhard rod and steering rod by moving each 55mm upwards. It provides significant improvements to steering precision and creates smooth handling for your lifted Jimny.
When lifting your Jimny, the use of the Adjustable Panhard Rod eliminates lateral displacement. But this alone does not solve the angle problem, and steering operability and riding comfort remain degraded. Using this kit enhances steering comfort so that you won't even feel that the vehicle is lifted. Made in Japan.
The Kit comes with Front Panhard Rod Relocation Bracket, RA-NO'S Adjustable Front Panhard Rod, Steering Correction Rod, and Bump Travel Limited Blocks.
* We recommend this kit only when the Jimny is lifted more than 60mm.
* Please correct the steering rod and Panhard rod at the same time. Correcting only one of them deteriorates operability.
* An Adjustable Panhard Rod that is about 40mm shorter than the original is included. The TANIGUCHI Adjustable Panhard Rod is too long to use.
* Only suitable for RHD (right-hand drive). We don't have the LHD model.
* The ball joint in the rod end of the steering rod for this kit uses a highly accurate pillow ball. However, the durability of this pillow ball may be less than the original SUZUKI ball joints due to the nature of the product. The pillow ball is consumable, so regular replacements might be required. A Replacement Pillow Ball is also available.
* We also recommend adding a Rubber Boot for the Pillow Ball. The rubber boot is effective in protecting the ball joint; however, please note that it does not guarantee complete protection. The rubber boot is also consumable and not covered by a warranty.
* Although a special tool is required, we also recommend greasing the pillow ball regularly.
Applicable vehicles: Jimny (1998-2018) JB43, 33, 23 RHD (right-hand drive)
Brand: RA-NO’S
Mounting: Professional (professional installation required)
About RA-NO'S:
RA-NO'S is a very small factory, but they produce 4x4 parts that are very durable and practical. The owner loves off-road racing and is also active as a racing machine builder and racing driver. Recently, they have been actively working on ECU remapping for various vehicle models. Their remapped ECUs, which are analyzed down to the last detail and have been meticulously remapped, have been highly praised by many enthusiasts.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.