RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)
RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)

*** This product is made-to-order and the order will take several weeks to ship.

This lightweight Trial Bonnet (hood) has better forward visibility since its front side has a lower shape than the original one.

Even though Jimny is a small car, forward visibility is a bit of a problem due to its angular body shape and high vehicle height. What's more, forward visibility is even worse in a lifted Jimny, especially in front of the side opposite the driver's side. This is often a problem not only when driving off-road, but also when driving in urban areas, creating the risk of accidents such as collisions with small children or obstacles. This Bonnet has a 25mm lower front side than the original SUZUKI ones and is ideal for trial competitions as well even for lifted Jimny.

It weighs only 4.5kg. The weight is about 7.1kg lighter compared to the approximate 11.6kg of the SUZUKI original one. It aims to reduce weight while ensuring strength with a double structure. Also, in the center, it was designed with a press line that 2nd generation Jimnys such as JA11 and JB31 used to have. Along with the JB74's linear interior and angular body shape, this design is effective in assessing the tilt and movement of the vehicle even when driving off-road, especially in trial competitions, and it also has a classic and stylish appearance. In addition, it has air vents on the side of the rear edge. They dissipate heat and reduce engine bay temperature rise.

Carbon type for 157,800 JPY (carbon fiber-reinforced plastics) and FRP type for 107,200 JPY (glass fiber-reinforced plastics). Both weigh almost the same.

Note: In Japan, due to poor forward visibility, lifted Jimnys will not pass strict vehicle inspections unless they are equipped with devices to ensure visibility to the front and front left, such as a front-view camera or an additional mirror. However, please note that this product does not guarantee that a lifted Jimny will pass a vehicle inspection.

*  This product is not painted. It is not intended to be used unpainted and must be painted. Clear coating is recommended for the Carbon type. The bonnets in the photos are painted.
* Since this product is handmade, there may be slight variations in shape and hole positions.
* Because it is a lightweight product, the bonnet gas springs cannot be installed together.
* The installation is the same as the original SUZUKI one, and the original bonnet catch can be used. Bonnet pins are not required.
* This product is made-to-order. The orders will take several weeks to ship. Please note that this product cannot be canceled after placing the order.

Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: RV4 Wild Goose
Material: Glass fiber-reinforced plastics (FRP)
Size: Same as SUZUKI original one
Weight: 4.5 kg (SUZUKI original is about 11.6kg)
Finish: Gel coating (white or black)
Mounting: Moderate (some experience and tools required)

About RV4 WILD GOOSE:
RV4 Wild Goose is a pioneer in the Japanese 4x4 industry in Japan and they manufacture various off-road parts which are durable and practical. Also, they hold a lot of off-road events, publish off-road magazines, and have off-road driving courses.

RV4 WILD GOOSE Carbon FRP Trial Bonnet with Air Vents Jimny JB74 (2018-ON)

Regular price ¥107,200 ¥0 Unit price per

*** This product is made-to-order and the order will take several weeks to ship.

This lightweight Trial Bonnet (hood) has better forward visibility since its front side has a lower shape than the original one.

Even though Jimny is a small car, forward visibility is a bit of a problem due to its angular body shape and high vehicle height. What's more, forward visibility is even worse in a lifted Jimny, especially in front of the side opposite the driver's side. This is often a problem not only when driving off-road, but also when driving in urban areas, creating the risk of accidents such as collisions with small children or obstacles. This Bonnet has a 25mm lower front side than the original SUZUKI ones and is ideal for trial competitions as well even for lifted Jimny.

It weighs only 4.5kg. The weight is about 7.1kg lighter compared to the approximate 11.6kg of the SUZUKI original one. It aims to reduce weight while ensuring strength with a double structure. Also, in the center, it was designed with a press line that 2nd generation Jimnys such as JA11 and JB31 used to have. Along with the JB74's linear interior and angular body shape, this design is effective in assessing the tilt and movement of the vehicle even when driving off-road, especially in trial competitions, and it also has a classic and stylish appearance. In addition, it has air vents on the side of the rear edge. They dissipate heat and reduce engine bay temperature rise.

Carbon type for 157,800 JPY (carbon fiber-reinforced plastics) and FRP type for 107,200 JPY (glass fiber-reinforced plastics). Both weigh almost the same.

Note: In Japan, due to poor forward visibility, lifted Jimnys will not pass strict vehicle inspections unless they are equipped with devices to ensure visibility to the front and front left, such as a front-view camera or an additional mirror. However, please note that this product does not guarantee that a lifted Jimny will pass a vehicle inspection.

*  This product is not painted. It is not intended to be used unpainted and must be painted. Clear coating is recommended for the Carbon type. The bonnets in the photos are painted.
* Since this product is handmade, there may be slight variations in shape and hole positions.
* Because it is a lightweight product, the bonnet gas springs cannot be installed together.
* The installation is the same as the original SUZUKI one, and the original bonnet catch can be used. Bonnet pins are not required.
* This product is made-to-order. The orders will take several weeks to ship. Please note that this product cannot be canceled after placing the order.

Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: RV4 Wild Goose
Material: Glass fiber-reinforced plastics (FRP)
Size: Same as SUZUKI original one
Weight: 4.5 kg (SUZUKI original is about 11.6kg)
Finish: Gel coating (white or black)
Mounting: Moderate (some experience and tools required)

About RV4 WILD GOOSE:
RV4 Wild Goose is a pioneer in the Japanese 4x4 industry in Japan and they manufacture various off-road parts which are durable and practical. Also, they hold a lot of off-road events, publish off-road magazines, and have off-road driving courses.

Shipping calculated at checkout.

Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.

Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.

Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.

Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.

Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.

Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.

* Please check the FAQ page or our policy pages for further information before purchasing.