RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)
RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)

A simple heavy-duty bumper that is designed by the off-road experience and technology of RV4 Wild Goose. This product is a sturdy bumper because the 3.2mm-thick steel has several reinforcing plates inside. Since this bumper is very durable and greatly improves the departure angle and function, it is recommended for those who love hard off-road adventure. Made in Japan. (Only Pintle Hook is made in Taiwan.)

This Bumper is very strong and can be used as high lift jack points and you can even step on it. Note: Please use the jack at the point between the mounting stays - do not use it at the side end of this bumper.

- Sold separately Taillights can be installed (photo #5, a set of left and right for 12,100 JPY). The taillights are located at about 2 cm depth inside the bumper and they are hard to break even if the bumper hits a rock or something hard. These Taillights have electrical connectors for Jimny JB74.

- 9mm-thick mounting stays have 70mm diameter holes which can be used as tow points. Also, they have 19mm diameter holes to which you can install tow shackles. In addition, these tow points are located at higher places, so they are easy to use.

- Also sold separately are the Pintle Hook with high tensile bolt kit (17,500 JPY) or Trailer Hitch Bracket with high tensile bolt kit (19,900 JPY) which are designed to match this bumper and can be installed easily with just bolts.

- Make it even more stylish by adding the optional Rear Side Garnishes (photo #4, a set of left and right for 6,100 JPY). Drilling is required for installation. Matte black paint stainless steel.

- The spare tire cannot be installed together, so remove it or use the separately-sold Adjustable Spare Tire Relocation Bracket (photo #6, 24,200 JPY). The height of the spare tire can be adjusted in 2 steps. License Plate Relocation Kit (photo #7, 9,100 JPY) may be required as well.


Rear Bumper only for 72,400 JPY, a set of two taillights for 12,100 JPY, a Pintle Hook with bolts for 17,500 JPY, a Trailer Hitch Bracket with bolts for 19,900 JPY, Rear Side Garnishes for 6,100 JPY, Adjustable Spare Tire Relocation Bracket for 24,200 JPY, and License Plate Relocation Kit for 9,100 JPY.

* Cutting the vehicle body slightly may be required in some cases.
* This product is on backorder and orders may take a few weeks to ship.

Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: RV4 Wild Goose
Material: 3.2mm-thick steel (bumper), 9.0mm-thick steel (mounting stay)
Weight: 13.2kg (bumper only)
Finish: Semi-matte black cationic electrode coating
Mounting: Moderate (some experience and tools required)

About RV4 WILD GOOSE:
RV4 Wild Goose is a pioneer in the Japanese 4x4 industry in Japan and they manufacture various off-road parts which are durable and practical. Also, they hold a lot of off-road events, publish off-road magazines, and have off-road driving courses.

RV4 WILD GOOSE Heavy-duty Steel Rear Bumper type1 Jimny JB74 (2018-ON)

Regular price ¥72,400 ¥0 Unit price per

A simple heavy-duty bumper that is designed by the off-road experience and technology of RV4 Wild Goose. This product is a sturdy bumper because the 3.2mm-thick steel has several reinforcing plates inside. Since this bumper is very durable and greatly improves the departure angle and function, it is recommended for those who love hard off-road adventure. Made in Japan. (Only Pintle Hook is made in Taiwan.)

This Bumper is very strong and can be used as high lift jack points and you can even step on it. Note: Please use the jack at the point between the mounting stays - do not use it at the side end of this bumper.

- Sold separately Taillights can be installed (photo #5, a set of left and right for 12,100 JPY). The taillights are located at about 2 cm depth inside the bumper and they are hard to break even if the bumper hits a rock or something hard. These Taillights have electrical connectors for Jimny JB74.

- 9mm-thick mounting stays have 70mm diameter holes which can be used as tow points. Also, they have 19mm diameter holes to which you can install tow shackles. In addition, these tow points are located at higher places, so they are easy to use.

- Also sold separately are the Pintle Hook with high tensile bolt kit (17,500 JPY) or Trailer Hitch Bracket with high tensile bolt kit (19,900 JPY) which are designed to match this bumper and can be installed easily with just bolts.

- Make it even more stylish by adding the optional Rear Side Garnishes (photo #4, a set of left and right for 6,100 JPY). Drilling is required for installation. Matte black paint stainless steel.

- The spare tire cannot be installed together, so remove it or use the separately-sold Adjustable Spare Tire Relocation Bracket (photo #6, 24,200 JPY). The height of the spare tire can be adjusted in 2 steps. License Plate Relocation Kit (photo #7, 9,100 JPY) may be required as well.


Rear Bumper only for 72,400 JPY, a set of two taillights for 12,100 JPY, a Pintle Hook with bolts for 17,500 JPY, a Trailer Hitch Bracket with bolts for 19,900 JPY, Rear Side Garnishes for 6,100 JPY, Adjustable Spare Tire Relocation Bracket for 24,200 JPY, and License Plate Relocation Kit for 9,100 JPY.

* Cutting the vehicle body slightly may be required in some cases.
* This product is on backorder and orders may take a few weeks to ship.

Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: RV4 Wild Goose
Material: 3.2mm-thick steel (bumper), 9.0mm-thick steel (mounting stay)
Weight: 13.2kg (bumper only)
Finish: Semi-matte black cationic electrode coating
Mounting: Moderate (some experience and tools required)

About RV4 WILD GOOSE:
RV4 Wild Goose is a pioneer in the Japanese 4x4 industry in Japan and they manufacture various off-road parts which are durable and practical. Also, they hold a lot of off-road events, publish off-road magazines, and have off-road driving courses.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Our shop will order these items after receiving your order, and so the order will take 4-6 business days or more to ship. Also, some others are on backorder or are made-to-order and may take several weeks or more.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. Please be aware that there may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult at the present.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

Design: Please note the colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.

* Please contact us for further information before purchasing.