These 75mm / 3-inch Lift Coil Springs are great all-round coil springs for Jimny, designed mainly for driving in the city. They are highly recommended for those who want to give their Jimny a lot of lift but who mainly drive in the city and on the highway.
The products' lift height is front: 70mm, and rear: 75mm, for the RHD (right-hand drive) 1500cc Jimny JB74 with the rear seat and the spare tire still in place. The spring height is adjustable by cutting from the part at the top of the coil springs where the coils are in contact. This gives you the option of adjusting the balance of the front and rear / left and right according to your preference and the situation.
These coil springs realize great solid and stable driving for on-road even when the lift height is 3 inches (70-75mm) because of the higher spring rate. Of course, they are products with good off-road driving performance as well. But for off-road adventures, we recommend the TANIGUCHI 60mm suspension or the SHOWA GARAGE 2-inch (50mm) suspension. Made in Japan.
SHOWA GARAGE's suspension development concept is that a suspension with high off-road driving performance must be comfortable even on-road. First, they repeat various tests on-road to adjust the spring rate and damping force, and then finalize it with off-road tests. In city driving, it offers a comfortable ride at any speed, reduced roll, and smooth steering even in cornering. In off-road driving, the developers pursued the ideal ground contact between the tires and the ground to achieve a stable suspension. It shows stability and great performance even in rough off-roading.
Please note that these products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for LHD (left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider cutting these coil springs. However, this has not been tested and may not work on all models.
Comes in a set of four Coil Springs (39,800 JPY). 75mm Standard Suspension Kit (137,400 JPY), 75mm Standard Plus Suspension Kit (167,700 JPY), or 75mm Premium Suspension Kit (224,100 JPY) are also available.
[ Required ]
- Longer shock absorbers
- Remove front cross member or replace with Drop Cross Member
- Extended Brake Hoses
- Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms
[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Bracket * both recommended
- Front Adjustable Panhard Rod
[ Required in some cases ]
- Head Light Leveler Correction Stay
- Rear Shock Absorber Relocation Kit
- Propeller shaft spacer (about 10mm) *Required when driving off-road
- Stabilizer correction items
|
free length (mm) |
spring rate (kgf/mm) |
|
| FR | 409 | 2.50 |
|
FL |
399 |
2.50 |
|
RR |
391 |
2.63 |
|
RL |
375 |
2.63 |
Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: SHOWA GARAGE
Lift height: front 70mm, rear 75mm (JB74)
Mounting: Professional (professional installation required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
SHOWA GARAGE 75mm Lift Adjustable Coil Springs Jimny JB74 (2018-ON)
These 75mm / 3-inch Lift Coil Springs are great all-round coil springs for Jimny, designed mainly for driving in the city. They are highly recommended for those who want to give their Jimny a lot of lift but who mainly drive in the city and on the highway.
The products' lift height is front: 70mm, and rear: 75mm, for the RHD (right-hand drive) 1500cc Jimny JB74 with the rear seat and the spare tire still in place. The spring height is adjustable by cutting from the part at the top of the coil springs where the coils are in contact. This gives you the option of adjusting the balance of the front and rear / left and right according to your preference and the situation.
These coil springs realize great solid and stable driving for on-road even when the lift height is 3 inches (70-75mm) because of the higher spring rate. Of course, they are products with good off-road driving performance as well. But for off-road adventures, we recommend the TANIGUCHI 60mm suspension or the SHOWA GARAGE 2-inch (50mm) suspension. Made in Japan.
SHOWA GARAGE's suspension development concept is that a suspension with high off-road driving performance must be comfortable even on-road. First, they repeat various tests on-road to adjust the spring rate and damping force, and then finalize it with off-road tests. In city driving, it offers a comfortable ride at any speed, reduced roll, and smooth steering even in cornering. In off-road driving, the developers pursued the ideal ground contact between the tires and the ground to achieve a stable suspension. It shows stability and great performance even in rough off-roading.
Please note that these products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for LHD (left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider cutting these coil springs. However, this has not been tested and may not work on all models.
Comes in a set of four Coil Springs (39,800 JPY). 75mm Standard Suspension Kit (137,400 JPY), 75mm Standard Plus Suspension Kit (167,700 JPY), or 75mm Premium Suspension Kit (224,100 JPY) are also available.
[ Required ]
- Longer shock absorbers
- Remove front cross member or replace with Drop Cross Member
- Extended Brake Hoses
- Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms
[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Bracket * both recommended
- Front Adjustable Panhard Rod
[ Required in some cases ]
- Head Light Leveler Correction Stay
- Rear Shock Absorber Relocation Kit
- Propeller shaft spacer (about 10mm) *Required when driving off-road
- Stabilizer correction items
|
free length (mm) |
spring rate (kgf/mm) |
|
| FR | 409 | 2.50 |
|
FL |
399 |
2.50 |
|
RR |
391 |
2.63 |
|
RL |
375 |
2.63 |
Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: SHOWA GARAGE
Lift height: front 70mm, rear 75mm (JB74)
Mounting: Professional (professional installation required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.