These Stabilizer Links are 30mm shorter than SUZUKI's original ones. These effectively correct any stabilizer distortion caused by lifting the Jimny. They make the stabilizer work efficiently and improve ride quality!
They can prevent the stabilizer from hitting the wheel. Also, the ground clearance will be increased by shortening the links, so it will have an advantage for off-road driving. These products suppress the rolling of the lifted Jimny, and also improve straight-line stability. Left and right set.
#1- 20-40mm lifted Jimny: Installing only these products is recommended.
#2- 40-60mm lifted Jimny: Installing only these products, or with about 10mm Relocation Brackets together (Correction Kit A for JB74) is recommended. In the case of where front radius arms extended to about 6mm have been installed, installing only these products is recommended.
#3- 60-80mm lifted Jimny: Installing with 20-30mm Relocation Brackets together (Correction Kit B for JB74, or Correction Kit B for JB43) is recommended. In the case of where front radius arms extended to about 10cm have been installed, installing these products together with 10mm Relocation Brackets (Correction Kit A for JB74) is recommended.
* These Short Links are compatible with the original bumper. But please note that SHOWA GARAGE Relocation Brackets are not compatible with the original bumper. It's also possible to install these Brackets by trimming the original SUZUKI bumper slightly. However, this has only ever been tested on some models and may not work on all models. Also, this method is not recommended by the manufacturer.
* TANIGUCHI Offset Stabilizer Relocation Brackets (for JB74, or JB43, 23) which are compatible with the original bumper are also recommended for those who lifted more than 40mm (60mm for JB43) with the original bumper.
* Depending on the lift amount, use the Stabilizer Relocation Bracket together and adjust the link angle as shown in the photo.
* It’s also a good idea to install these products on the original SUZUKI suspension which has not been lifted. Recommended for those who like sporty driving with reduced roll during on-road driving. In that case, however, please note that the stabilizer will be too effective. This method reduces front suspension travel and is not recommended for off-road driving.
* Suspension Correction Kit is also available.
Applicable vehicles: Jimny (2018-present, 2004-2018) JB74, 64, 43 type4-9, 23 type5-10
Brand: SHOWA GARAGE
Mounting: Moderate (some experience and tools required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
SHOWA GARAGE Short Stabilizer Links for Jimny
These Stabilizer Links are 30mm shorter than SUZUKI's original ones. These effectively correct any stabilizer distortion caused by lifting the Jimny. They make the stabilizer work efficiently and improve ride quality!
They can prevent the stabilizer from hitting the wheel. Also, the ground clearance will be increased by shortening the links, so it will have an advantage for off-road driving. These products suppress the rolling of the lifted Jimny, and also improve straight-line stability. Left and right set.
#1- 20-40mm lifted Jimny: Installing only these products is recommended.
#2- 40-60mm lifted Jimny: Installing only these products, or with about 10mm Relocation Brackets together (Correction Kit A for JB74) is recommended. In the case of where front radius arms extended to about 6mm have been installed, installing only these products is recommended.
#3- 60-80mm lifted Jimny: Installing with 20-30mm Relocation Brackets together (Correction Kit B for JB74, or Correction Kit B for JB43) is recommended. In the case of where front radius arms extended to about 10cm have been installed, installing these products together with 10mm Relocation Brackets (Correction Kit A for JB74) is recommended.
* These Short Links are compatible with the original bumper. But please note that SHOWA GARAGE Relocation Brackets are not compatible with the original bumper. It's also possible to install these Brackets by trimming the original SUZUKI bumper slightly. However, this has only ever been tested on some models and may not work on all models. Also, this method is not recommended by the manufacturer.
* TANIGUCHI Offset Stabilizer Relocation Brackets (for JB74, or JB43, 23) which are compatible with the original bumper are also recommended for those who lifted more than 40mm (60mm for JB43) with the original bumper.
* Depending on the lift amount, use the Stabilizer Relocation Bracket together and adjust the link angle as shown in the photo.
* It’s also a good idea to install these products on the original SUZUKI suspension which has not been lifted. Recommended for those who like sporty driving with reduced roll during on-road driving. In that case, however, please note that the stabilizer will be too effective. This method reduces front suspension travel and is not recommended for off-road driving.
* Suspension Correction Kit is also available.
Applicable vehicles: Jimny (2018-present, 2004-2018) JB74, 64, 43 type4-9, 23 type5-10
Brand: SHOWA GARAGE
Mounting: Moderate (some experience and tools required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.