A Kit with some more correction parts added to the Standard Kit. Recommended for those who are looking for even higher levels of driving performance.
This 2" / 50mm lift suspension kit, specifically designed for the Jimny JB23 (1998-2018) JDM (Japan Domestic Market) and JB33 (1998-2000) shows the best performance. Excellent stability and comfort are realized from off-road to city driving. Computer simulations, off-road, high-speed, and city driving tests were conducted numerous times. This is a very popular lift suspension kit for Jimny in Japan. Made in Japan.
This Suspension Kit lifts your Jimny by 2 inches / 50mm. Both of these TANIGUCHI 2-inch Lift Suspension Kit and 3-inch Lift Suspension Kit are high-performance and high-quality, all-round coil springs. Compared to the 3-inch Lift Coil Springs, these 2-inch Lift Coil Springs offer slightly better ride comfort, but both have almost the same characteristics. Please choose according to your favorite lift amount. Also, a 70mm Suspension Kit which uses dual-rate coil springs is available. Dual-rate coil springs offer excellent comfort and controllability at high-speed driving even on rough off-road.
TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.
* Please note that these products are designed for a Jimny JB23 (1998-2018) JDM (Japan Domestic Market) and JB33 (1998-2000). It is possible to install them for some JB43 as well, but not recommended. Also, if this Front Panhard Rod is installed on LHD (left-hand drive), it may touch the differential.
* In a normal situation, the recommended damping settings are 4. Lower settings such as 2-3 are recommended for off-road driving, or if you like soft and comfortable driving. Higher settings such as 5-6 are recommended if a heavy roof rack is installed, or you wish to suppress roll and seek solid, sporty, and stable driving. However, some people prefer a firmer ride off-road, so it's up to you. We don't recommend 1 or 8, so please set them between 2 and 7.
* Please choose Fixed Shock Absorbers, or Adjustable Shock Absorbers (+17,000 JPY).
* Some products in the video are 3-inch Lift Suspension Kits.
A) 50mm Lift Standard Suspension Kit (165,600 - 182,600 JPY) includes Coil Springs, Shock Absorbers, 50mm Extended Brake Hoses, Caster Correction Bushes 5.0, and Front and Rear Panhard Rods.
B) 50mm Lift Premium Suspension Kit (176,100 - 193,100 JPY) includes Standard Kit plus Offset Stabilizer Relocation Brackets, and Rear Panhard Rod Relocation Bracket.
[ Recommended in some cases ]
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
Coil Springs
free length (mm) |
spring rate (N/mm) |
|
FR | 409.0 |
18.0 |
FL |
384.5 |
18.0 |
RR |
438.0 |
14.0 |
RL |
369.0 |
14.0 |
Adjustable Shock Absorbers
|
front |
rear |
extended length (mm) |
475 |
525 |
compressed length (mm) |
295 |
327 |
Fixed Shock Absorbers
|
front |
rear |
extended length (mm) |
480 |
525 |
compressed length (mm) |
296 |
324 |
Applicable vehicles: Jimny (1998-2018) JB23 JDM, (1998-2000) JB33 RHD
Brand: TANIGUCHI
Lift height: front 50mm, rear 50mm
Mounting: Professional (professional installation required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI 2-inch Lift Premium Suspension Kit Jimny JB23 (1998-2018)
A Kit with some more correction parts added to the Standard Kit. Recommended for those who are looking for even higher levels of driving performance.
This 2" / 50mm lift suspension kit, specifically designed for the Jimny JB23 (1998-2018) JDM (Japan Domestic Market) and JB33 (1998-2000) shows the best performance. Excellent stability and comfort are realized from off-road to city driving. Computer simulations, off-road, high-speed, and city driving tests were conducted numerous times. This is a very popular lift suspension kit for Jimny in Japan. Made in Japan.
This Suspension Kit lifts your Jimny by 2 inches / 50mm. Both of these TANIGUCHI 2-inch Lift Suspension Kit and 3-inch Lift Suspension Kit are high-performance and high-quality, all-round coil springs. Compared to the 3-inch Lift Coil Springs, these 2-inch Lift Coil Springs offer slightly better ride comfort, but both have almost the same characteristics. Please choose according to your favorite lift amount. Also, a 70mm Suspension Kit which uses dual-rate coil springs is available. Dual-rate coil springs offer excellent comfort and controllability at high-speed driving even on rough off-road.
TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.
* Please note that these products are designed for a Jimny JB23 (1998-2018) JDM (Japan Domestic Market) and JB33 (1998-2000). It is possible to install them for some JB43 as well, but not recommended. Also, if this Front Panhard Rod is installed on LHD (left-hand drive), it may touch the differential.
* In a normal situation, the recommended damping settings are 4. Lower settings such as 2-3 are recommended for off-road driving, or if you like soft and comfortable driving. Higher settings such as 5-6 are recommended if a heavy roof rack is installed, or you wish to suppress roll and seek solid, sporty, and stable driving. However, some people prefer a firmer ride off-road, so it's up to you. We don't recommend 1 or 8, so please set them between 2 and 7.
* Please choose Fixed Shock Absorbers, or Adjustable Shock Absorbers (+17,000 JPY).
* Some products in the video are 3-inch Lift Suspension Kits.
A) 50mm Lift Standard Suspension Kit (165,600 - 182,600 JPY) includes Coil Springs, Shock Absorbers, 50mm Extended Brake Hoses, Caster Correction Bushes 5.0, and Front and Rear Panhard Rods.
B) 50mm Lift Premium Suspension Kit (176,100 - 193,100 JPY) includes Standard Kit plus Offset Stabilizer Relocation Brackets, and Rear Panhard Rod Relocation Bracket.
[ Recommended in some cases ]
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)
Coil Springs
free length (mm) |
spring rate (N/mm) |
|
FR | 409.0 |
18.0 |
FL |
384.5 |
18.0 |
RR |
438.0 |
14.0 |
RL |
369.0 |
14.0 |
Adjustable Shock Absorbers
|
front |
rear |
extended length (mm) |
475 |
525 |
compressed length (mm) |
295 |
327 |
Fixed Shock Absorbers
|
front |
rear |
extended length (mm) |
480 |
525 |
compressed length (mm) |
296 |
324 |
Applicable vehicles: Jimny (1998-2018) JB23 JDM, (1998-2000) JB33 RHD
Brand: TANIGUCHI
Lift height: front 50mm, rear 50mm
Mounting: Professional (professional installation required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.