TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)
TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)
TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)
TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)
TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)
TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)
TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)

Specifically designed dual-rate coil springs for Jimny JA23 by TANIGUCHI and CHUHATSU. These Dual-rate Coil Springs "Athlete" offer excellent comfort and cornering for both on-road and off-road. Also, controllability can be ensured even at high speed driving on rough off-roads. TANIGUCHI highly recommends these Lift Coil Springs because it ensures a stable ride. Excellent for high-speed off-road racing as well.

Dual-rate Coil Springs are soft when there is a slight impact and become hard when there is greater impact, always allowing for a stable and smooth ride. Tested numerous times by both computer simulations and off-road, high speed, and city driving, the results prove these Springs to be a superior product.

When used with TANIGUCHI shock absorber, AS8 or SUPER LONG, excellent stability and comfort are realized from off-road to city driving. The durability and rust resistance are the same as those of the major automobile manufacturers' original coil springs. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality and comfort more than the SUZUKI original one.

Comes in a set of four coil springs (46,600 JPY). TANIGUCHI Dual-rate Lift Suspension Kits are also available (164,000 - 292,000 JPY)

* These coil springs lift your Jimny by 2.5-3 inches / 65-75mm. Also, 2-inch / 50mm Lift Coil Springs, and 3-inch / 75mm Lift Coil Springs are available.
* These products are designed for Jimny JB23 JDM (Japan Domestic Market) 660cc and JB33. Please note they don't fit JB43.

[ Required ]
- Longer shock absorbers
- 50mm extended brake hoses

[ Recommended ]
- Caster Correction Bushes 5.0, or Caster Corrected Front Radius Arms (almost necessary)
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit

[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

free length (mm)

spring rate (N/mm)

FR 406.5 21.0 / 25.5

FL 

378.5

21.0 / 25.5

RR

393.0

23.0 / 27.6

RL

344.0

23.0 / 27.6

Applicable vehicles: Jimny (1998-2018) JB23 JDM, JB33 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 65-75mm, rear 65-75mm
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 70mm Lift Dual-rate Coil Springs Jimny JB23 JDM (1998-2018)

Regular price ¥46,600 ¥0 Unit price per

Specifically designed dual-rate coil springs for Jimny JA23 by TANIGUCHI and CHUHATSU. These Dual-rate Coil Springs "Athlete" offer excellent comfort and cornering for both on-road and off-road. Also, controllability can be ensured even at high speed driving on rough off-roads. TANIGUCHI highly recommends these Lift Coil Springs because it ensures a stable ride. Excellent for high-speed off-road racing as well.

Dual-rate Coil Springs are soft when there is a slight impact and become hard when there is greater impact, always allowing for a stable and smooth ride. Tested numerous times by both computer simulations and off-road, high speed, and city driving, the results prove these Springs to be a superior product.

When used with TANIGUCHI shock absorber, AS8 or SUPER LONG, excellent stability and comfort are realized from off-road to city driving. The durability and rust resistance are the same as those of the major automobile manufacturers' original coil springs. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality and comfort more than the SUZUKI original one.

Comes in a set of four coil springs (46,600 JPY). TANIGUCHI Dual-rate Lift Suspension Kits are also available (164,000 - 292,000 JPY)

* These coil springs lift your Jimny by 2.5-3 inches / 65-75mm. Also, 2-inch / 50mm Lift Coil Springs, and 3-inch / 75mm Lift Coil Springs are available.
* These products are designed for Jimny JB23 JDM (Japan Domestic Market) 660cc and JB33. Please note they don't fit JB43.

[ Required ]
- Longer shock absorbers
- 50mm extended brake hoses

[ Recommended ]
- Caster Correction Bushes 5.0, or Caster Corrected Front Radius Arms (almost necessary)
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit

[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

free length (mm)

spring rate (N/mm)

FR 406.5 21.0 / 25.5

FL 

378.5

21.0 / 25.5

RR

393.0

23.0 / 27.6

RL

344.0

23.0 / 27.6

Applicable vehicles: Jimny (1998-2018) JB23 JDM, JB33 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 65-75mm, rear 65-75mm
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some of them are the manufacturer's stock. In that case, our shop will order them after receiving your order, so the order will take 4-6 business days to ship. Also, some others are on backorder or are made-to-order and may take several weeks or more.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. Please be aware that there may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult at the present.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

* Please contact us for further information before purchasing.