TANIGUCHI 75mm Lift Standard Plus Suspension Kit Jimny JB43 (2000-2018)
TANIGUCHI 75mm Lift Standard Plus Suspension Kit Jimny JB43 (2000-2018)
TANIGUCHI 75mm Lift Standard Plus Suspension Kit Jimny JB43 (2000-2018)
TANIGUCHI 75mm Lift Standard Plus Suspension Kit Jimny JB43 (2000-2018)
TANIGUCHI 75mm Lift Standard Plus Suspension Kit Jimny JB43 (2000-2018)
TANIGUCHI 75mm Lift Standard Plus Suspension Kit Jimny JB43 (2000-2018)

A Kit that creates great ride comfort and high driving performance by including appropriate correction parts. Highly recommended!

This 3" / 75mm lift suspension kit, specifically designed for the 1300 Jimny JB43 (2000-2018) shows the best performance. Excellent stability and comfort are realized from off-road to city driving. Both computer simulations and off-road, high speed and city driving tests were conducted numerous times. This is a very popular lift suspension kit for Jimny in Japan. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

Please note that these products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for a LHD (left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. This product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

* Please choose Fixed Shock Absorbers, or Adjustable Shock Absorbers (+17,500 JPY).

A) 75mm Lift Standard Suspension Kit (111,100 - 128,600 JPY) includes Coil Springs, Shock Absorbers, and 50mm Extended Brake Hoses.
B) 75mm Standard Plus Suspension Kit (137,900 - 155,400 JPY) includes Standard Kit plus two of Caster Correction Bushes 5.0, Rear Panhard Rod Relocation Bracket, and Offset Stabilizer Relocation Bracket.
C) 75mm Lift Premium Suspension Kit (251,700 - 269,200 JPY) includes Standard Plus Kit plus two of Caster Correction Bushes 2.5, Rear Adjustable Panhard Rods, Front Suspension and Steering Correction Kit, and Rear Panhard Rod Offset Relocation Bracket.

[ Recommended ]
*highly recommended
- Rear Adjustable Panhard Rod
- Front Adjustable Panhard Rod, or Front Suspension and Steering Correction Kit

[ Required in some cases ]
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

 

Coil Springs

free length (mm)

spring rate (N/mm)

FR 432
23.5

FL 

413

23.5

RR

408

23.4

RL

369

23.4

Adjustable Shock Absorbers

 

front

rear

extended length (mm)

475

525

compressed length (mm)

295

327

Fixed Shock Absorbers

 

front

rear

extended length (mm)

480

525

compressed length (mm)

296

324

Applicable vehicles: Jimny (2000-2018) JB43 RHD (right handle drive)
Brand: TANIGUCHI
Lift height: front 75mm, rear 75mm
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 75mm Lift Standard Plus Suspension Kit Jimny JB43 (2000-2018)

Regular price ¥137,900 ¥0 Unit price per

A Kit that creates great ride comfort and high driving performance by including appropriate correction parts. Highly recommended!

This 3" / 75mm lift suspension kit, specifically designed for the 1300 Jimny JB43 (2000-2018) shows the best performance. Excellent stability and comfort are realized from off-road to city driving. Both computer simulations and off-road, high speed and city driving tests were conducted numerous times. This is a very popular lift suspension kit for Jimny in Japan. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

Please note that these products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for a LHD (left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. This product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

* Please choose Fixed Shock Absorbers, or Adjustable Shock Absorbers (+17,500 JPY).

A) 75mm Lift Standard Suspension Kit (111,100 - 128,600 JPY) includes Coil Springs, Shock Absorbers, and 50mm Extended Brake Hoses.
B) 75mm Standard Plus Suspension Kit (137,900 - 155,400 JPY) includes Standard Kit plus two of Caster Correction Bushes 5.0, Rear Panhard Rod Relocation Bracket, and Offset Stabilizer Relocation Bracket.
C) 75mm Lift Premium Suspension Kit (251,700 - 269,200 JPY) includes Standard Plus Kit plus two of Caster Correction Bushes 2.5, Rear Adjustable Panhard Rods, Front Suspension and Steering Correction Kit, and Rear Panhard Rod Offset Relocation Bracket.

[ Recommended ]
*highly recommended
- Rear Adjustable Panhard Rod
- Front Adjustable Panhard Rod, or Front Suspension and Steering Correction Kit

[ Required in some cases ]
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

 

Coil Springs

free length (mm)

spring rate (N/mm)

FR 432
23.5

FL 

413

23.5

RR

408

23.4

RL

369

23.4

Adjustable Shock Absorbers

 

front

rear

extended length (mm)

475

525

compressed length (mm)

295

327

Fixed Shock Absorbers

 

front

rear

extended length (mm)

480

525

compressed length (mm)

296

324

Applicable vehicles: Jimny (2000-2018) JB43 RHD (right handle drive)
Brand: TANIGUCHI
Lift height: front 75mm, rear 75mm
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

* Please note some of our products are not stocked in our warehouse. They are manufacture's stock and our shop will order them after your purchase, so the order will take 4-6 days to ship. Also, some others are on backorder or are made-to-order and may take several weeks.

* Please be aware that our shipping cost calculation system is imperfect, and there may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult at the present.