TANIGUCHI Adjustable Shock Absorbers A14X 2-3"/50-75mm lift Jimny (18-ON)
TANIGUCHI Adjustable Shock Absorbers A14X 2-3"/50-75mm lift Jimny (18-ON)
TANIGUCHI Adjustable Shock Absorbers A14X 2-3"/50-75mm lift Jimny (18-ON)
TANIGUCHI Adjustable Shock Absorbers A14X 2-3"/50-75mm lift Jimny (18-ON)
TANIGUCHI Adjustable Shock Absorbers A14X 2-3"/50-75mm lift Jimny (18-ON)
TANIGUCHI Adjustable Shock Absorbers A14X 2-3"/50-75mm lift Jimny (18-ON)
TANIGUCHI Adjustable Shock Absorbers A14X 2-3"/50-75mm lift Jimny (18-ON)

These adjustable shock absorbers are specifically designed for Jimny by TANIGUCHI and KYB. The shock absorbers have a long suspension travel which matches with TANIGUCHI's SOLVE ACE 40 / 60 coil springs. The new JB74 Jimny (2018-ON) has a bigger roof and a higher center of gravity, making it easier to roll. This product is designed with a damping force which has a higher tension-side priority and can be adjusted in 14 steps, enabling settings to suit various driving styles.

They are the best-selling and most tested Jimny shock absorbers. They work well with all 2-3" lift springs made by other companies and are sold in many 4WD shops by Jimny enthusiasts in Japan. They are the most popular aftermarket shock absorbers for New Jimny in Japan now. Low-pressure gas type, twin-tube, piston diameter is 30mm. Sold as a set of four. Made in Japan.

  

Required

 - Longer coil springs (2-3"/50-75mm lift)

 - Remove front cross member or replace with Drop Cross Member

 - 50mm extended brake hoses

 - Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms

 

Recommended

 - Rear Adjustable Panhard Rod, or Rear Panhard Rod Correction Bracket (both recommended)

 - Front Adjustable Panhard Rod

 - Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)


Required in some cases

 - Propeller shaft spacer

 - Stabilizer correction item (Offset Stabilizer Bracket etc.)

 - Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod

 

 

front

rear

extended length (mm)

475

525

compressed length (mm)

297

331

 

Applicable vehicles: Jimny (2018-present) JB74, 64

Brand: TANIGUCHI, KYB

Mounting: Professional (professional installation required)

TANIGUCHI Adjustable Shock Absorbers A14X 2-3"/50-75mm lift Jimny (18-ON)

Regular price ¥78,900 ¥0 Unit price per

These adjustable shock absorbers are specifically designed for Jimny by TANIGUCHI and KYB. The shock absorbers have a long suspension travel which matches with TANIGUCHI's SOLVE ACE 40 / 60 coil springs. The new JB74 Jimny (2018-ON) has a bigger roof and a higher center of gravity, making it easier to roll. This product is designed with a damping force which has a higher tension-side priority and can be adjusted in 14 steps, enabling settings to suit various driving styles.

They are the best-selling and most tested Jimny shock absorbers. They work well with all 2-3" lift springs made by other companies and are sold in many 4WD shops by Jimny enthusiasts in Japan. They are the most popular aftermarket shock absorbers for New Jimny in Japan now. Low-pressure gas type, twin-tube, piston diameter is 30mm. Sold as a set of four. Made in Japan.

  

Required

 - Longer coil springs (2-3"/50-75mm lift)

 - Remove front cross member or replace with Drop Cross Member

 - 50mm extended brake hoses

 - Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms

 

Recommended

 - Rear Adjustable Panhard Rod, or Rear Panhard Rod Correction Bracket (both recommended)

 - Front Adjustable Panhard Rod

 - Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)


Required in some cases

 - Propeller shaft spacer

 - Stabilizer correction item (Offset Stabilizer Bracket etc.)

 - Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod

 

 

front

rear

extended length (mm)

475

525

compressed length (mm)

297

331

 

Applicable vehicles: Jimny (2018-present) JB74, 64

Brand: TANIGUCHI, KYB

Mounting: Professional (professional installation required)