*** This product is made-to-order. The orders will take a few weeks to ship.
A set of thin front and rear Bumpers, and a Skid Plate. The tires are exposed and your Jimny gets a more off-road vehicle look. The approach angle and the departure angle are larger, which improves off-road driving performance. All made in Japan.
Please choose from the three mounting brackets for the Skid Plate in the photos, because different models have different mounting brackets.
On JB43 type 4 or later (2005-2018), the original CIBIE or VALEO fog lights can be reinstalled. We can add two of these fog lights for 9,300 JPY if you don't have them. On the JB33-JB43 type 3 (1998-2005), the original fog lights cannot be reinstalled because a different brand of fog lights was used for these older models.
The spare tire cannot be installed together, so remove it or use the Spare Tire Relocation Bracket. The Rear Bumper also matches the TANIGUCHI Muffler, Rear Recovery Tow Points, and Trailer Hitch Bracket.
Comes with Front Bumper, Rear Bumper Kit (rear bumper, turn light bulbs, and reversing lights), and Skid Plate for 96,900 JPY.
And you can add TANIGUCHI LED License Plate Relocation Kit. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 16,300 JPY, plating for 17,600 JPY).
Spare Tire Relocation Bracket for19,800 JPY.
You can add TANIGUCHI Recovery Tow Points as well. Red paint steel type for 4,900 JPY, or a set of two red paint steel types for 9,500 JPY. Stainless type for 8,100 JPY, or a set of two stainless types for 15,900 JPY.
Also, you can upgrade the reversing lights into the LED models for an additional 5,400 JPY.
* These Bumpers are not painted. They are not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* This product is made-to-order. The orders will take a few weeks to ship.
Applicable vehicles: Jimny (1998-2018) JB43, 33
Brand: TANIGUCHI
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI Bumpers with Skid Plate Jimny JB43 (1998-2018)
*** This product is made-to-order. The orders will take a few weeks to ship.
A set of thin front and rear Bumpers, and a Skid Plate. The tires are exposed and your Jimny gets a more off-road vehicle look. The approach angle and the departure angle are larger, which improves off-road driving performance. All made in Japan.
Please choose from the three mounting brackets for the Skid Plate in the photos, because different models have different mounting brackets.
On JB43 type 4 or later (2005-2018), the original CIBIE or VALEO fog lights can be reinstalled. We can add two of these fog lights for 9,300 JPY if you don't have them. On the JB33-JB43 type 3 (1998-2005), the original fog lights cannot be reinstalled because a different brand of fog lights was used for these older models.
The spare tire cannot be installed together, so remove it or use the Spare Tire Relocation Bracket. The Rear Bumper also matches the TANIGUCHI Muffler, Rear Recovery Tow Points, and Trailer Hitch Bracket.
Comes with Front Bumper, Rear Bumper Kit (rear bumper, turn light bulbs, and reversing lights), and Skid Plate for 96,900 JPY.
And you can add TANIGUCHI LED License Plate Relocation Kit. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 16,300 JPY, plating for 17,600 JPY).
Spare Tire Relocation Bracket for19,800 JPY.
You can add TANIGUCHI Recovery Tow Points as well. Red paint steel type for 4,900 JPY, or a set of two red paint steel types for 9,500 JPY. Stainless type for 8,100 JPY, or a set of two stainless types for 15,900 JPY.
Also, you can upgrade the reversing lights into the LED models for an additional 5,400 JPY.
* These Bumpers are not painted. They are not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* Cutting the fender liners will be required. Drilling may be required in some cases.
* This product is made-to-order. The orders will take a few weeks to ship.
Applicable vehicles: Jimny (1998-2018) JB43, 33
Brand: TANIGUCHI
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.