The original Suzuki cross member hits the propeller shaft when the Jimny is lifted. And if you use an aftermarket drop bracket to fix this problem while keeping the original cross member, the ground clearance is reduced by 50-70mm, which isn't favorable for off-road driving. However, with this product, you can keep the performance for off-road driving since the clearance is reduced by only 15mm.
One more option to solve this clearance problem is to remove the original cross member. However, it reduces the rigidity of the car body and slightly deteriorates off-road driving performance. In addition, it does not pass the strict car inspection in Japan because it reduces safety in the event of an accident. It is possible to drive your Jimny without this cross member, but we recommend this product for your off-road drive performance and especially for your safety.
It can be used for both A/T and M/T. Recommended for Jimny which is lifted more than 50mm, but good for less than 50mm as well. It is compatible with front shock absorbers with a maximum length of 500mm or less. Most aftermarket front shock absorbers' maximum length, which lift your Jimny 75cm / 3 inches, are shorter than 480mm. So, this product will fit most Jimny models which are lifted less than 75mm / 3 inches. Made in Japan.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI, PLOT
Material: Steel
Finish: Cationic electrode position coating
Mounting: Moderate (some experience and tools required)
About TANIGUCHI and PLOT:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
PLOT was founded in 1980 and is known for its high quality custom parts for motorcycles, which exhibit functional beauty and provide high performance. In recent years, they have been enthusiastically producing vehicle parts as well, and their products will enhance your driving performance and your enjoyment of the outdoors and leisure time.
TANIGUCHI Drop Cross Member Jimny JB74 (2018-ON)
The original Suzuki cross member hits the propeller shaft when the Jimny is lifted. And if you use an aftermarket drop bracket to fix this problem while keeping the original cross member, the ground clearance is reduced by 50-70mm, which isn't favorable for off-road driving. However, with this product, you can keep the performance for off-road driving since the clearance is reduced by only 15mm.
One more option to solve this clearance problem is to remove the original cross member. However, it reduces the rigidity of the car body and slightly deteriorates off-road driving performance. In addition, it does not pass the strict car inspection in Japan because it reduces safety in the event of an accident. It is possible to drive your Jimny without this cross member, but we recommend this product for your off-road drive performance and especially for your safety.
It can be used for both A/T and M/T. Recommended for Jimny which is lifted more than 50mm, but good for less than 50mm as well. It is compatible with front shock absorbers with a maximum length of 500mm or less. Most aftermarket front shock absorbers' maximum length, which lift your Jimny 75cm / 3 inches, are shorter than 480mm. So, this product will fit most Jimny models which are lifted less than 75mm / 3 inches. Made in Japan.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI, PLOT
Material: Steel
Finish: Cationic electrode position coating
Mounting: Moderate (some experience and tools required)
About TANIGUCHI and PLOT:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
PLOT was founded in 1980 and is known for its high quality custom parts for motorcycles, which exhibit functional beauty and provide high performance. In recent years, they have been enthusiastically producing vehicle parts as well, and their products will enhance your driving performance and your enjoyment of the outdoors and leisure time.

Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Our shop will order these items after receiving your order, and so the order will take 4-6 business days or more to ship. Also, some others are on backorder or are made-to-order and may take several weeks or more.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. Please be aware that there may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult at the present.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Design: Please note the colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.