This Oil Catch Can Kit separates and catches unwanted particulates and harmful substances such as sludge, carbon, water vapor, oil vapor, and fuel which are contained in blow-by gasses. By removing these, it prevents the air filter, throttle, and other intakes from becoming dirty. It also helps prevent dirt accumulation inside the crankcase and protects the engine. It is designed to maximize engine performance and longevity and is effective for 4WD and performance vehicles, keeping the engine clean and in high-performance condition. Especially, it is extremely effective for engines equipped with turbochargers such as the JB64 JDM, and is also great for the JB74 equipped with a naturally aspirated engine. Made in Japan. Diameter approximately 71mm, height excluding drain tap approximately 236mm.
High-performance Oil Catch Can: The oil catch can is a unique TANIGUCHI product that has been popular since the third generation Jimny JB23 (1998-2018). It has a two-layered structure and has two pipes of different lengths that effectively separate harmful substances such as oil. It is taller than general products and has the feature that the separated oil does not leak out even during intense off-road driving where the vehicle shakes and tilts. It is a proven high-performance product. Made of painted aluminum.
Effective Mounting Position: The installation location is at the front of the engine bay, avoiding the location where high temperature is present such as near the exhaust manifold or turbo unit. Therefore, it can maintain a moderate temperature, neither too high nor too low. In addition, by installing it at almost the same height as the engine, harmful substances such as oil are less likely to flow back.
Convenient Oil Drain System: It is easy to drain the separated oil by loosening the oil drain tap. Also, you can visually know the oil level inside easily by checking the level gauge.
Easy Installation: This Kit comes with brackets, stays, and hoses with moderate angles. They are specially designed for each Jimny model and are easy to install without drilling, trimming, or cutting.
Durable Hoses: Hoses are tough heat resistant, oil resistant, and bend resistant to accommodate use in the high temperature engine bay. They are proven and reliable products.
* The model for the JB64 JDM includes brackets and stays allowing it to fit the original SUZUKI air cleaner, exposed type, and various TANIGUCHI intake products.
* Please check the oil level and drain the oil inside the Oil Catch Can periodically.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI Oil Catch Can Kit Jimny JB74 (2018-ON)
This Oil Catch Can Kit separates and catches unwanted particulates and harmful substances such as sludge, carbon, water vapor, oil vapor, and fuel which are contained in blow-by gasses. By removing these, it prevents the air filter, throttle, and other intakes from becoming dirty. It also helps prevent dirt accumulation inside the crankcase and protects the engine. It is designed to maximize engine performance and longevity and is effective for 4WD and performance vehicles, keeping the engine clean and in high-performance condition. Especially, it is extremely effective for engines equipped with turbochargers such as the JB64 JDM, and is also great for the JB74 equipped with a naturally aspirated engine. Made in Japan. Diameter approximately 71mm, height excluding drain tap approximately 236mm.
High-performance Oil Catch Can: The oil catch can is a unique TANIGUCHI product that has been popular since the third generation Jimny JB23 (1998-2018). It has a two-layered structure and has two pipes of different lengths that effectively separate harmful substances such as oil. It is taller than general products and has the feature that the separated oil does not leak out even during intense off-road driving where the vehicle shakes and tilts. It is a proven high-performance product. Made of painted aluminum.
Effective Mounting Position: The installation location is at the front of the engine bay, avoiding the location where high temperature is present such as near the exhaust manifold or turbo unit. Therefore, it can maintain a moderate temperature, neither too high nor too low. In addition, by installing it at almost the same height as the engine, harmful substances such as oil are less likely to flow back.
Convenient Oil Drain System: It is easy to drain the separated oil by loosening the oil drain tap. Also, you can visually know the oil level inside easily by checking the level gauge.
Easy Installation: This Kit comes with brackets, stays, and hoses with moderate angles. They are specially designed for each Jimny model and are easy to install without drilling, trimming, or cutting.
Durable Hoses: Hoses are tough heat resistant, oil resistant, and bend resistant to accommodate use in the high temperature engine bay. They are proven and reliable products.
* The model for the JB64 JDM includes brackets and stays allowing it to fit the original SUZUKI air cleaner, exposed type, and various TANIGUCHI intake products.
* Please check the oil level and drain the oil inside the Oil Catch Can periodically.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.