TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)
TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)

A thin bumper that retains the original soft image and has a simple and natural atmosphere. Great for off-roading, this bumper greatly improves the departure angle of the rear tires. Made in Japan.

If your Jimny is in original condition, turn signal bulbs and reversing lights are required. The reversing lights or bright LED reversing lights which come in a kit can be installed. If using the original tail lights on the body, the reversing lights must be replaced with turn signal bulbs. Wiring is also required.

The spare tire cannot be installed together, so remove it or use the Spare Tire Relocation Bracket (19,800 JPY). This Bumper also matches the TANIGUCHI Muffler, Rear Recovery Tow Point Hooks, and Trailer Hitch Bracket.

Bumper only for 38,700 JPY. Rear Bumper Kit comes in a set of bumper, turn light bulbs, and reversing lights for 43,500 JPY. You can upgrade the reversing lights into the LED models for an additional 5,400 JPY.

And you can add TANIGUCHI LED License Plate Relocation Kit. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 16,300 JPY, plating for 17,600 JPY). You can add TANIGUCHI Recovery Tow Hooks as well. Red paint steel type for 4,900 JPY, or a set of two red paint steel types for 9,500 JPY. Stainless type for 8,100 JPY, or a set of two stainless types for 15,900 JPY.

* This product is not painted. The bumpers in the photos are painted.
* Cutting the fender liners will be required. Drilling may be required in some cases.

Applicable vehicles: Jimny (1998-2018) JB43, 33
Brand: TANIGUCHI
Material: FRP (Fibre-reinforced plastic)
Finish: White gel coating (not painted)
Mounting: Moderate (some experience and tools required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI Rear Bumper Jimny JB43 (1998-2018)

Regular price ¥38,700 ¥0 Unit price per

A thin bumper that retains the original soft image and has a simple and natural atmosphere. Great for off-roading, this bumper greatly improves the departure angle of the rear tires. Made in Japan.

If your Jimny is in original condition, turn signal bulbs and reversing lights are required. The reversing lights or bright LED reversing lights which come in a kit can be installed. If using the original tail lights on the body, the reversing lights must be replaced with turn signal bulbs. Wiring is also required.

The spare tire cannot be installed together, so remove it or use the Spare Tire Relocation Bracket (19,800 JPY). This Bumper also matches the TANIGUCHI Muffler, Rear Recovery Tow Point Hooks, and Trailer Hitch Bracket.

Bumper only for 38,700 JPY. Rear Bumper Kit comes in a set of bumper, turn light bulbs, and reversing lights for 43,500 JPY. You can upgrade the reversing lights into the LED models for an additional 5,400 JPY.

And you can add TANIGUCHI LED License Plate Relocation Kit. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 16,300 JPY, plating for 17,600 JPY). You can add TANIGUCHI Recovery Tow Hooks as well. Red paint steel type for 4,900 JPY, or a set of two red paint steel types for 9,500 JPY. Stainless type for 8,100 JPY, or a set of two stainless types for 15,900 JPY.

* This product is not painted. The bumpers in the photos are painted.
* Cutting the fender liners will be required. Drilling may be required in some cases.

Applicable vehicles: Jimny (1998-2018) JB43, 33
Brand: TANIGUCHI
Material: FRP (Fibre-reinforced plastic)
Finish: White gel coating (not painted)
Mounting: Moderate (some experience and tools required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.