TANIGUCHI Rear Panhard Rod Relocation Bracket for Jimny
TANIGUCHI Rear Panhard Rod Relocation Bracket for Jimny
TANIGUCHI Rear Panhard Rod Relocation Bracket for Jimny
TANIGUCHI Rear Panhard Rod Relocation Bracket for Jimny
TANIGUCHI Rear Panhard Rod Relocation Bracket for Jimny
TANIGUCHI Rear Panhard Rod Relocation Bracket for Jimny

This is a popular product that improves the ride comfort for your lifted Jimny! This product is not always necessary for the lifted Jimny but is highly recommended for more than 2-inch / 50mm lifted Jimnys. We recommend it even for 1-inch / 25mm lifted Jimnys. It is also very effective in high speed off-road driving.

When your Jimny is lifted, the use of the Adjustable Panhard Rod eliminates lateral displacement. But this alone does not solve the angle problem. A Panhard rod should ideally be at an angle close to horizontal. However, if the Panhard rod has become too angled by lifting, the vehicle's body sways not only up and down but also left and right when driving on bumpy roads. It also causes various problems such as unstable behavior when rolling and applying force in the direction in which the body twists during acceleration. Especially in the rear Panhard rod, these problems appear conspicuously. This product solves this angle problem by correcting the mounting position of the rear Panhard rod by about 40mm upwards and creates a smooth, stable ride even in various situations.

The official name of this product is "Rear Panhard Rod Correction Bracket V (five)". TANIGUCHI has been manufacturing these brackets with improvements since 1995 and this is the fifth edition. This is a reliable and popular product. Drilling or cutting are not required. Made in Japan.

[ Recommended installation ]
-- JB74, 64 (2018-present) --
1, Lifted 20-60mm: Using this bracket.
2, Lifted 60mm or more: Using both this bracket with the Adjustable Panhard Rod.

-- JB43, 33, 23 (1998-2018) --
1, Lifted 20-60mm: Using this bracket.
2, Lifted 60-75mm: Using this bracket together with the Offset Bracket.
3, Lifted 75mm or more: Using both this bracket and the Offset Bracket with the Adjustable Panhard Rod.

Note: It is OK for lifted Jimny to use only this Bracket in some cases. However, to achieve the highest results of proper left and right alignment for any lifted Jimny, we recommend using both these relocation brackets and the Adjustable Panhard Rod regardless of the amount of lift.

* Suspension Correction Kit is also available.

Applicable vehicles: Jimny (2018-present, 1998-1998) JB74, 64, 43, 33, 23
Brand: TANIGUCHI
Material: 6mm steel
Color: Black plating finish
Mounting: Moderate (some experience and tools required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI Rear Panhard Rod Relocation Bracket for Jimny

Regular price ¥8,300 ¥0 Unit price per

This is a popular product that improves the ride comfort for your lifted Jimny! This product is not always necessary for the lifted Jimny but is highly recommended for more than 2-inch / 50mm lifted Jimnys. We recommend it even for 1-inch / 25mm lifted Jimnys. It is also very effective in high speed off-road driving.

When your Jimny is lifted, the use of the Adjustable Panhard Rod eliminates lateral displacement. But this alone does not solve the angle problem. A Panhard rod should ideally be at an angle close to horizontal. However, if the Panhard rod has become too angled by lifting, the vehicle's body sways not only up and down but also left and right when driving on bumpy roads. It also causes various problems such as unstable behavior when rolling and applying force in the direction in which the body twists during acceleration. Especially in the rear Panhard rod, these problems appear conspicuously. This product solves this angle problem by correcting the mounting position of the rear Panhard rod by about 40mm upwards and creates a smooth, stable ride even in various situations.

The official name of this product is "Rear Panhard Rod Correction Bracket V (five)". TANIGUCHI has been manufacturing these brackets with improvements since 1995 and this is the fifth edition. This is a reliable and popular product. Drilling or cutting are not required. Made in Japan.

[ Recommended installation ]
-- JB74, 64 (2018-present) --
1, Lifted 20-60mm: Using this bracket.
2, Lifted 60mm or more: Using both this bracket with the Adjustable Panhard Rod.

-- JB43, 33, 23 (1998-2018) --
1, Lifted 20-60mm: Using this bracket.
2, Lifted 60-75mm: Using this bracket together with the Offset Bracket.
3, Lifted 75mm or more: Using both this bracket and the Offset Bracket with the Adjustable Panhard Rod.

Note: It is OK for lifted Jimny to use only this Bracket in some cases. However, to achieve the highest results of proper left and right alignment for any lifted Jimny, we recommend using both these relocation brackets and the Adjustable Panhard Rod regardless of the amount of lift.

* Suspension Correction Kit is also available.

Applicable vehicles: Jimny (2018-present, 1998-1998) JB74, 64, 43, 33, 23
Brand: TANIGUCHI
Material: 6mm steel
Color: Black plating finish
Mounting: Moderate (some experience and tools required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.

Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.

* Please contact us for further information before purchasing.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
m
manuel jr. abella
A perfect Kit for 2 inch lifters

I highly recommend getting this correction kit if your jimny is lifted 2 inches. In my case, this fixed my car, which feels like it will tumble sideways when I corner hard.