TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)
TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)
TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)
TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)
TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)
TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)
TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)
TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)

These shock absorbers by TANIGUCHI and KYB were specifically designed for the 1998 - 2018 JB43, 33, 23 Jimny. They also work well with TANIGUCHI's 3" Lift Coil Springs or 2-3" lift springs of any kind. They were developed and tested numerous times paying special attention to suspension travel, rubber bush hardness, and the damping force against the suspension velocity.

The damping force is fixed at the intermediate level of the TANIGUCHI Adjustable Shock Absorber. Low-pressure gas type, twin-tube, piston diameter is 30mm. Comes in a set of four Shock Absorbers. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

[ Required ]
- 50mm extended brake hoses
- Longer coil springs (2-3"/50-75mm lift)
- Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Correction Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)

 

front

rear

extended length (mm)

480

525

compressed length (mm)

296

324


Applicable vehicles: Jimny (1998-2018) JB43, 33, 23
Brand: TANIGUCHI, KYB
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI Shock Absorbers for 2-3"/50-75mm lifted Jimny (1998-2018)

Regular price ¥56,600 ¥0 Unit price per

These shock absorbers by TANIGUCHI and KYB were specifically designed for the 1998 - 2018 JB43, 33, 23 Jimny. They also work well with TANIGUCHI's 3" Lift Coil Springs or 2-3" lift springs of any kind. They were developed and tested numerous times paying special attention to suspension travel, rubber bush hardness, and the damping force against the suspension velocity.

The damping force is fixed at the intermediate level of the TANIGUCHI Adjustable Shock Absorber. Low-pressure gas type, twin-tube, piston diameter is 30mm. Comes in a set of four Shock Absorbers. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

[ Required ]
- 50mm extended brake hoses
- Longer coil springs (2-3"/50-75mm lift)
- Caster Correction Bushes (5.0, or 5.0 and 2.5), or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Correction Brackets (both recommended)
- Front Adjustable Panhard Rod, or Steering and Front Panhard Rod Correction Kit
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

[ Required in some cases ]
- Propeller shaft spacer
- Stabilizer correction item (Offset Stabilizer Bracket etc.)

 

front

rear

extended length (mm)

480

525

compressed length (mm)

296

324


Applicable vehicles: Jimny (1998-2018) JB43, 33, 23
Brand: TANIGUCHI, KYB
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some of them are the manufacturer's stock. In that case, our shop will order them after receiving your order, so the order will take 4-6 business days to ship. Also, some others are on backorder or are made-to-order and may take several weeks or more.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. Please be aware that there may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult at the present.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

Design: Please note the colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.

* Please contact us for further information before purchasing.