*** This product is made-to-order and the orders will take several weeks to ship.
Compatible with aftermarket thin rear bumpers, protects the lower part of your Jimny's rear, and makes your Jimny look more stylish. Easy installation with just bolts on the original tie-down hooks. The bar is 42.7mm in diameter and made of 2.3mm thick steel. Made in Japan.
Note 1: Only compatible with thin bumpers such as TANIGUCHI's FRP Rear Bumper or TANIGUCHI Steel Rear Bumper. The distance from the bottom of the rear gate is approximately 290mm, so any aftermarket bumper with a thickness of 290mm or less may be compatible. However, our shop and the manufacturer have not tested compatibility with anything other than TANIGUCHI Bumpers. Does not fit the original SUZUKI rear bumper.
Note 2: Only compatible with mufflers that offer a higher exit position than the original muffler, such as the TANIGUCHI Competition Muffler Type R. However, our shop and the manufacturer have not tested compatibility with anything other than the TANIGUCHI Competition Muffler Type R. Does not fit the original SUZUKI muffler. Also, mufflers with silencers around the rear may not be compatible.
* It comes with only the Bar and mounting parts. The FRP bumpers or steel bumpers in the photos are sold separately.
* It is also designed to comply with Japan's strict rear entry prevention regulations. However, the inspector's judgment may differ depending on your suspension and other conditions, so therefore, please note that this product does not guarantee that a lifted Jimny will pass a vehicle inspection.
* This product is not a protector, guard, or trail bar. It is not able to protect the bumper or body during intense off-road adventures where it hits the ground frequently and violently.
* This product is made-to-order and the orders will take several weeks to ship.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI
Material: 2.3mm-thick steel
Diameter: 42.7mm
Finish: Black baked powder coating
Mounting: Easy (with basic tool)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI Rear Under-bumper Bar Jimny JB74 (2018-ON)
*** This product is made-to-order and the orders will take several weeks to ship.
Compatible with aftermarket thin rear bumpers, protects the lower part of your Jimny's rear, and makes your Jimny look more stylish. Easy installation with just bolts on the original tie-down hooks. The bar is 42.7mm in diameter and made of 2.3mm thick steel. Made in Japan.
Note 1: Only compatible with thin bumpers such as TANIGUCHI's FRP Rear Bumper or TANIGUCHI Steel Rear Bumper. The distance from the bottom of the rear gate is approximately 290mm, so any aftermarket bumper with a thickness of 290mm or less may be compatible. However, our shop and the manufacturer have not tested compatibility with anything other than TANIGUCHI Bumpers. Does not fit the original SUZUKI rear bumper.
Note 2: Only compatible with mufflers that offer a higher exit position than the original muffler, such as the TANIGUCHI Competition Muffler Type R. However, our shop and the manufacturer have not tested compatibility with anything other than the TANIGUCHI Competition Muffler Type R. Does not fit the original SUZUKI muffler. Also, mufflers with silencers around the rear may not be compatible.
* It comes with only the Bar and mounting parts. The FRP bumpers or steel bumpers in the photos are sold separately.
* It is also designed to comply with Japan's strict rear entry prevention regulations. However, the inspector's judgment may differ depending on your suspension and other conditions, so therefore, please note that this product does not guarantee that a lifted Jimny will pass a vehicle inspection.
* This product is not a protector, guard, or trail bar. It is not able to protect the bumper or body during intense off-road adventures where it hits the ground frequently and violently.
* This product is made-to-order and the orders will take several weeks to ship.
Applicable vehicles: Jimny (2018-present) JB74, 64
Brand: TANIGUCHI
Material: 2.3mm-thick steel
Diameter: 42.7mm
Finish: Black baked powder coating
Mounting: Easy (with basic tool)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.
Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.
* Please contact us for further information before purchasing.