Great for off-roading, this stylish thin bumper which has a simple and natural atmosphere greatly improves the departure angle. It is designed to be as thin as possible while keeping SUZUKI's original taillights. This thin bumper exposes the rear suspension, giving it the powerful appearance of an off-road vehicle.
SUZUKI's original taillights can be installed while keeping the original rear covers. You don't need to remove or relocate the spare tire with this bumper. Suitable with even larger size spare tires. TANIGUCHI Competition Muffler Type R fits with this thin rear bumper. Made in Japan.
Bumper only for 46,800 JPY.
You can add an Adjustable License Plate Relocation Kit which has a slide adjustment width of about 5 cm. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 25,100 JPY, plating for 26,400 JPY). It's also possible to add a Lower License Plate Relocation Kit. (23,500 JPY)
Also, you can add TANIGUCHI Heavy-duty Recovery Tow Points. Red paint steel type for 11,000 JPY, or a set of two red paint steel types for 21,900 JPY. Stainless steel type for 15,400 JPY, or a set of two stainless types for 30,700 JPY.
By using the TANIGUCHI Parking Sensor Relocation Brackets, it might be possible to relocate the rear parking sensor installed on the Jimny JB74, 64 (2024+) type 4-present to this rear bumper easily while keeping the same angle as the original ones. However, compatibility has not been tested.
* This product is not painted. It is not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* This product is on backorder and the order may take a few weeks to ship.
Applicable vehicles: Jimny (2018-present) JB74
Brand: TANIGUCHI
Material: FRP (Fibre-reinforced plastic)
Finish: White gel coating (not painted)
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
TANIGUCHI FRP Rear Bumper Jimny JB74 (2018-ON)
Great for off-roading, this stylish thin bumper which has a simple and natural atmosphere greatly improves the departure angle. It is designed to be as thin as possible while keeping SUZUKI's original taillights. This thin bumper exposes the rear suspension, giving it the powerful appearance of an off-road vehicle.
SUZUKI's original taillights can be installed while keeping the original rear covers. You don't need to remove or relocate the spare tire with this bumper. Suitable with even larger size spare tires. TANIGUCHI Competition Muffler Type R fits with this thin rear bumper. Made in Japan.
Bumper only for 46,800 JPY.
You can add an Adjustable License Plate Relocation Kit which has a slide adjustment width of about 5 cm. The Kit comes with a black or plating waterproof LED license plate light which has 6 long life, high bright LED bulbs (black for 25,100 JPY, plating for 26,400 JPY). It's also possible to add a Lower License Plate Relocation Kit. (23,500 JPY)
Also, you can add TANIGUCHI Heavy-duty Recovery Tow Points. Red paint steel type for 11,000 JPY, or a set of two red paint steel types for 21,900 JPY. Stainless steel type for 15,400 JPY, or a set of two stainless types for 30,700 JPY.
By using the TANIGUCHI Parking Sensor Relocation Brackets, it might be possible to relocate the rear parking sensor installed on the Jimny JB74, 64 (2024+) type 4-present to this rear bumper easily while keeping the same angle as the original ones. However, compatibility has not been tested.
* This product is not painted. It is not intended to be used unpainted and must be painted. The bumpers in the photos are painted.
* This product is on backorder and the order may take a few weeks to ship.
Applicable vehicles: Jimny (2018-present) JB74
Brand: TANIGUCHI
Material: FRP (Fibre-reinforced plastic)
Finish: White gel coating (not painted)
Mounting: Moderate (some experience and tools required)
About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.