TANIGUCHI 6mm Propeller Shaft Spacer for Jimny
TANIGUCHI 6mm Propeller Shaft Spacer for Jimny

This 6mm Propeller Shaft Spacer is usually the right size when the rear of the Jimny has been lifted 2-3 inches (50-75mm) or when using aftermarket front radius arms. The uneven design in the center prevents shifting and ensures a perfect fit. High tensile bolts are included. Made in Japan.

We advise extending the propeller shaft, especially for the rear of JB43 type 4 - 9 (2004-2018), in the following cases because the propeller shaft joint may come off.
- Lifted more than 75mm.
- The rear shock absorber extended length is 540mm or more.
- Rear trailing arms or front radius arms were replaced with aftermarket products.
- The rear trailing arm uses castor correction bushes.
- When driving hard off-road.
- When the accelerator is turned off and there is a sound from the shaft.

Note 1: The TANIGUCHI Rear Shock Absorbers have an extended length of 525 mm. If the rear trailing arms are original or the suspension is TANIGUCHI, then a propeller shaft spacer is not required. However, you might consider using this product if there is any discomfort as it creates a smoother ride.

Note 2: This product is easy to install, but the propeller shaft extension of a lifted vehicle must be carefully sized. If it is too short or too long, it can damage the transfer or differential. The thickness of the propeller shaft spacers must be carefully determined if using propeller shaft spacers of 10 mm or more, especially when you are driving off-road.

Also, SHOWA GARAGE 10mm Spacer is available.

Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: TANIGUCHI
Material: Steel
Finish: Plating finish
Size: 6mm

Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 6mm Propeller Shaft Spacer for Jimny

Regular price ¥7,300 ¥0 Unit price per

This 6mm Propeller Shaft Spacer is usually the right size when the rear of the Jimny has been lifted 2-3 inches (50-75mm) or when using aftermarket front radius arms. The uneven design in the center prevents shifting and ensures a perfect fit. High tensile bolts are included. Made in Japan.

We advise extending the propeller shaft, especially for the rear of JB43 type 4 - 9 (2004-2018), in the following cases because the propeller shaft joint may come off.
- Lifted more than 75mm.
- The rear shock absorber extended length is 540mm or more.
- Rear trailing arms or front radius arms were replaced with aftermarket products.
- The rear trailing arm uses castor correction bushes.
- When driving hard off-road.
- When the accelerator is turned off and there is a sound from the shaft.

Note 1: The TANIGUCHI Rear Shock Absorbers have an extended length of 525 mm. If the rear trailing arms are original or the suspension is TANIGUCHI, then a propeller shaft spacer is not required. However, you might consider using this product if there is any discomfort as it creates a smoother ride.

Note 2: This product is easy to install, but the propeller shaft extension of a lifted vehicle must be carefully sized. If it is too short or too long, it can damage the transfer or differential. The thickness of the propeller shaft spacers must be carefully determined if using propeller shaft spacers of 10 mm or more, especially when you are driving off-road.

Also, SHOWA GARAGE 10mm Spacer is available.

Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: TANIGUCHI
Material: Steel
Finish: Plating finish
Size: 6mm

Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some products we list are the manufacturer's stock. Also, some others are on backorder, made-to-order, or pre-order-sale, and the orders may take several weeks or more to ship.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well, but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.

Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications and design of the logo, etc. of the listed products may be subject to change for improvement.

* Please contact us for further information before purchasing.