The rear shock absorber's suspension travel of the original Jimny is just barely under the limit. So, when you lift the Jimny by 20-40mm they immediately go over the limit, and it makes the drive uncomfortable and reduces driving performance. We recommend using this product if you want to keep the original shock absorbers when you lift the Jimny up to 40mm. Since the front shock absorbers have a bit of margin, it is possible to keep the original shock absorbers without needing extender brackets if the lift is up to 30 mm.
Left and right set for 5,900 JPY. Affordable 20mm Lift Kit, and very popular 1-inch / 25-30mm Lift Kit are available as well.
* Also, we recommend TANIGUCHI Shock Absorbers, or SHOWA GARAGE Shock Absorbers if you wish more driving performance and comfort.
* These products are compatible with the original Jimny JB74 shock absorbers and coil springs. There will be more suspension travel if these products are installed with them, and they are good for off-road driving as well. A 30mm rear left extended brake hose will be required.
[Recommended]
- Rear Panhard Rod Relocation Bracket
- Caster Correction Bushes
[Required in some cases]
- Head Light Leveler Correction Stay *JB74
- 30mm rear left extended brake hose
Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: SHOWA GARAGE
Material: Steel
Size: +35mm
Mounting: Moderate (some experience and tools required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
SHOWA GARAGE Rear Shock Absorber 35mm Extender Brackets for Jimny
The rear shock absorber's suspension travel of the original Jimny is just barely under the limit. So, when you lift the Jimny by 20-40mm they immediately go over the limit, and it makes the drive uncomfortable and reduces driving performance. We recommend using this product if you want to keep the original shock absorbers when you lift the Jimny up to 40mm. Since the front shock absorbers have a bit of margin, it is possible to keep the original shock absorbers without needing extender brackets if the lift is up to 30 mm.
Left and right set for 5,900 JPY. Affordable 20mm Lift Kit, and very popular 1-inch / 25-30mm Lift Kit are available as well.
* Also, we recommend TANIGUCHI Shock Absorbers, or SHOWA GARAGE Shock Absorbers if you wish more driving performance and comfort.
* These products are compatible with the original Jimny JB74 shock absorbers and coil springs. There will be more suspension travel if these products are installed with them, and they are good for off-road driving as well. A 30mm rear left extended brake hose will be required.
[Recommended]
- Rear Panhard Rod Relocation Bracket
- Caster Correction Bushes
[Required in some cases]
- Head Light Leveler Correction Stay *JB74
- 30mm rear left extended brake hose
Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: SHOWA GARAGE
Material: Steel
Size: +35mm
Mounting: Moderate (some experience and tools required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.