This 10mm Propeller Shaft Spacer is usually the right size when the rear of the Jimny has been lifted more than 3 inches (75mm) or when using aftermarket front radius arms. The uneven design in the center prevents shifting and ensures a perfect fit. High tensile bolts are included. Made in Japan.
We advise extending the propeller shaft, especially for the rear of JB43 type 4 - 9 (2004-2018), in the following cases because the propeller shaft joint may come off.
- Lifted more than 75mm.
- The rear shock absorber extended length is 540mm or more.
- Rear trailing arms or front radius arms were replaced with aftermarket products.
- The rear trailing arm uses castor correction bushes.
- When driving hard off-road.
- When the accelerator is turned off and there is a sound from the shaft.
Note 1: The TANIGUCHI Rear Shock Absorbers have an extended length of 525 mm. If the rear trailing arms are original or the suspension is TANIGUCHI, then a propeller shaft spacer is not required. However, you might consider using this product if there is any discomfort as it creates a smoother ride.
Note 2: This product is easy to install, but the propeller shaft extension of a lifted vehicle must be carefully sized. If it is too short or too long, it can damage the transfer or differential. The thickness of the propeller shaft spacers must be carefully determined if using propeller shaft spacers of 10 mm or more, especially when you are driving off-road.
Also, TANIGUCHI 6mm Spacer is available.
Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: SHOWA GARAGE
Material: Steel
Size: 10mm
Mounting: Professional (professional installation required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
SHOWA GARAGE 10mm Propeller Shaft Spacer for Jimny
This 10mm Propeller Shaft Spacer is usually the right size when the rear of the Jimny has been lifted more than 3 inches (75mm) or when using aftermarket front radius arms. The uneven design in the center prevents shifting and ensures a perfect fit. High tensile bolts are included. Made in Japan.
We advise extending the propeller shaft, especially for the rear of JB43 type 4 - 9 (2004-2018), in the following cases because the propeller shaft joint may come off.
- Lifted more than 75mm.
- The rear shock absorber extended length is 540mm or more.
- Rear trailing arms or front radius arms were replaced with aftermarket products.
- The rear trailing arm uses castor correction bushes.
- When driving hard off-road.
- When the accelerator is turned off and there is a sound from the shaft.
Note 1: The TANIGUCHI Rear Shock Absorbers have an extended length of 525 mm. If the rear trailing arms are original or the suspension is TANIGUCHI, then a propeller shaft spacer is not required. However, you might consider using this product if there is any discomfort as it creates a smoother ride.
Note 2: This product is easy to install, but the propeller shaft extension of a lifted vehicle must be carefully sized. If it is too short or too long, it can damage the transfer or differential. The thickness of the propeller shaft spacers must be carefully determined if using propeller shaft spacers of 10 mm or more, especially when you are driving off-road.
Also, TANIGUCHI 6mm Spacer is available.
Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23
Brand: SHOWA GARAGE
Material: Steel
Size: 10mm
Mounting: Professional (professional installation required)
About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
Stock: We have a lot of products in stock. But wheels are the manufacturer's stock or pre-order-sale. Bumpers are the manufacturer's stock or made-to-order. Some other products may be on backorder or are made-to-order. Such items may take a while to ship.
Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. There may be an additional shipping cost in some rare cases.
Compatibility: Our products are designed for RHD and the Japanese domestic market. Most of our products may fit international models and LHD, but we have not tested the compatibility. Jimny 5 Door is unavailable in Japan yet, and compatibility has not been tested. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle.
Tax: Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Design: The colors of the products in the photos may look different from the actual products depending on the condition of the photos and the type of displays. The specifications, design, etc. of the listed products may be subject to change for improvement.
Cancellation: A cancellation fee of 5% of the order value will be charged. Pre-orders, made-to-order, and manufacturer's stock products cannot be canceled after placing the order.
Shipping Method: If you would like a specific shipping company or method, please inform us at the time of purchase. There may be an additional shipping cost depending on the company. Without any word from the buyer, we choose the company depending on the situation.
* Please check the FAQ page or our policy pages for further information before purchasing.