SHOWA GARAGE Rear Shock Absorber Extender Brackets for Jimny
SHOWA GARAGE Rear Shock Absorber Extender Brackets for Jimny
Brackets that extend the rear shock absorbers by 35 mm. When installed with the original shock absorbers, they are compatible with a 0.5-1.5 inch (20-40mm) lifted Jimny and improve driving comfort. Can be installed both on the upper side and lower side. Made in Japan.

The rear shock absorber's suspension travel of the original Jimny is just barely under the limit. So, when you lift the Jimny by 20-40mm they immediately go over the limit, and it makes the drive uncomfortable and reduces driving performance. We recommend using this product if you want to keep the original shock absorbers when you lift the Jimny up to 40mm. Since the front shock absorbers have a bit of margin, it is possible to keep the original shock absorbers without needing extender brackets if the lift is up to 30 mm.

Left and right set for 5,700 JPY. Affordable 20mm Lift Kit for 27,800-42,600 JPY, and very popular 1-inch / 25-30mm Lift Kit for 38,400 JPY-53,500 JPY are available as well.

* Also, we recommend TANIGUCHI Shock Absorbers, or SHOWA GARAGE Shock Absorbers if you wish more driving performance and comfort.

[Recommended]
- Rear Panhard Rod Relocation Bracket
- Caster Correction Bushes

[Required in some cases]
- Head Light Leveler Correction Stay *JB74
- 30mm rear left extended brake hose

Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23

Brand: SHOWA GARAGE
Material: Steel
Size: +35mm
Mounting: Moderate (some experience and tools required)

About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.

SHOWA GARAGE Rear Shock Absorber Extender Brackets for Jimny

Regular price ¥5,700 ¥0 Unit price per
Brackets that extend the rear shock absorbers by 35 mm. When installed with the original shock absorbers, they are compatible with a 0.5-1.5 inch (20-40mm) lifted Jimny and improve driving comfort. Can be installed both on the upper side and lower side. Made in Japan.

The rear shock absorber's suspension travel of the original Jimny is just barely under the limit. So, when you lift the Jimny by 20-40mm they immediately go over the limit, and it makes the drive uncomfortable and reduces driving performance. We recommend using this product if you want to keep the original shock absorbers when you lift the Jimny up to 40mm. Since the front shock absorbers have a bit of margin, it is possible to keep the original shock absorbers without needing extender brackets if the lift is up to 30 mm.

Left and right set for 5,700 JPY. Affordable 20mm Lift Kit for 27,800-42,600 JPY, and very popular 1-inch / 25-30mm Lift Kit for 38,400 JPY-53,500 JPY are available as well.

* Also, we recommend TANIGUCHI Shock Absorbers, or SHOWA GARAGE Shock Absorbers if you wish more driving performance and comfort.

[Recommended]
- Rear Panhard Rod Relocation Bracket
- Caster Correction Bushes

[Required in some cases]
- Head Light Leveler Correction Stay *JB74
- 30mm rear left extended brake hose

Applicable vehicles: Jimny (2018-present, 1998-2018) JB74, 64, 43, 33, 23

Brand: SHOWA GARAGE
Material: Steel
Size: +35mm
Mounting: Moderate (some experience and tools required)

About SHOWA GARAGE:
SHOWA GARAGE is a manufacturer that specializes in 4x4 parts for SUZUKI small vehicles such as Jimny, EVERY, and HUSTLER. The staff has participated in off-road competitions for many years and has won many times, especially in trial competitions. They are good at fine-tuned parts which are convenient for off-road driving based on the experiences of competition.
Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some of them are the manufacturer's stock. In that case, our shop will order them after receiving your order, so the order will take 4-6 business days to ship. Also, some others are on backorder or are made-to-order and may take several weeks or more.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. Please be aware that there may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult at the present.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

* Please contact us for further information before purchasing.