TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)
TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)

We highly recommend these 60mm / 2.5" Lift Coil Springs for the Jimny JB74 for off-road driving!
The front weight of the JB74 Jimny (2018-ON) is not as heavy as the JB43 (1998-2018). It is easy for JB74 Jimny front wheels to slip on off-road, especially when climbing uphill. Considering this, the front coils are set low on the spring rate producing effective front traction. Dual-rate coil springs on the rear suppress the roll and enable a comfortable ride.
Designed by TANIGUCHI and CHUHATSU and tested numerous times to ensure off or on-road comfort. These coil springs combined with TANIGUCHI 2-3 inch lift Shock Absorbers show the best off-road performance. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality and comfort more than the SUZUKI original ones.

These products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for LHD(left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. Please note this product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

Comes in a set of four Coil Springs (48,700 JPY), or 60mm Suspension Kits (143,800 - 211,400 JPY).

[ Required ]
- Longer shock absorbers
- Remove front cross member or replace with Drop Cross Member
- 50mm Extended Brake Hoses
- Caster Correction Bushes 5.0, or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Bracket (both recommended)
- Front Adjustable Panhard Rod

[ Required in some cases ]
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

free length (mm)

spring rate (N/mm)

FR 419 18.0

FL 

404

18.0

RR

376.5

23.0 / 27.0

RL

362

23.0 / 27.0

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 55mm, rear 65mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 60mm Lift Coil Springs Jimny JB74 (2018-ON)

Regular price ¥48,700 ¥0 Unit price per

We highly recommend these 60mm / 2.5" Lift Coil Springs for the Jimny JB74 for off-road driving!
The front weight of the JB74 Jimny (2018-ON) is not as heavy as the JB43 (1998-2018). It is easy for JB74 Jimny front wheels to slip on off-road, especially when climbing uphill. Considering this, the front coils are set low on the spring rate producing effective front traction. Dual-rate coil springs on the rear suppress the roll and enable a comfortable ride.
Designed by TANIGUCHI and CHUHATSU and tested numerous times to ensure off or on-road comfort. These coil springs combined with TANIGUCHI 2-3 inch lift Shock Absorbers show the best off-road performance. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality and comfort more than the SUZUKI original ones.

These products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for LHD(left-hand drive) as well. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. Please note this product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

Comes in a set of four Coil Springs (48,700 JPY), or 60mm Suspension Kits (143,800 - 211,400 JPY).

[ Required ]
- Longer shock absorbers
- Remove front cross member or replace with Drop Cross Member
- 50mm Extended Brake Hoses
- Caster Correction Bushes 5.0, or Caster Corrected Front Radius Arms

[ Recommended ]
- Rear Adjustable Panhard Rod, or Rear Panhard Rod Relocation Bracket (both recommended)
- Front Adjustable Panhard Rod

[ Required in some cases ]
- Stabilizer correction item (Offset Stabilizer Bracket etc.)
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Propeller shaft spacer
- Extended bump stop (X-large Bump Stop or Bump Stop Block etc.)

free length (mm)

spring rate (N/mm)

FR 419 18.0

FL 

404

18.0

RR

376.5

23.0 / 27.0

RL

362

23.0 / 27.0

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI, CHUHATSU
Lift height: front 55mm, rear 65mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some of them are the manufacturer's stock. In that case, our shop will order them after receiving your order, so the order will take 4-6 business days to ship. Also, some others are on backorder or are made-to-order and may take several weeks or more.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. Please be aware that there may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult at the present.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

* Please contact us for further information before purchasing.