TANIGUCHI 40mm Lift Premium Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Premium Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Premium Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Premium Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Premium Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Premium Suspension Kit Jimny JB74 (2018-ON)
TANIGUCHI 40mm Lift Premium Suspension Kit Jimny JB74 (2018-ON)

A Kit with Panhard rods and bump stops added to the Standard Plus Kit. Really highly recommended for those who are looking for even higher levels of driving performance. We recommend these products as the best all-round suspension kit for Jimny in Japan because they ensure a stable ride!

These Adjustable Shock Absorbers and Coil Springs are specifically designed by TANIGUCHI for new Jimny (2018-ON). Both computer simulations and off-road, high speed and city driving tests were conducted numerous times.
Dual-rate Coil Springs are always allowing for a stable and smooth ride. Shock Absorbers can be adjusted in 14 steps, enabling settings to suit various driving styles. And due to the long suspension travel and low center of gravity, it's also excellent on rough roads. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

Please note that these products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for a LHD (left-hand drive) as well except for the Front Panhard Rod. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. This product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

A) 40 mm Lift Standard Suspension Kit (141,600 JPY) includes Coil Springs, Shock Absorbers, and 50mm Extended Brake Hoses.
B) 40 mm Standard Plus Suspension Kit (163,600 JPY) includes Standard Kit plus two of Caster Correction Bushes 5.0, and Rear Panhard Rod Relocation Bracket.
C) 40 mm Lift Premium Suspension Kit (206,900 JPY) includes Standard Plus Kit plus Front and Rear Adjustable Panhard Rods, and X-Large Extended Bump Stops.

[ Required ]
- Remove front cross member or replace with Drop Cross Member

[ Required in some cases ]
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Stabilizer Relocation Bracketlock etc.

 

Coil Springs

free length (mm)

spring rate (N/mm)

FR 383.7 21.0 / 24.0

FL 

364

21.0 / 24.0

RR

351

23.0 / 25.0

RL

332

23.0 / 25.0

 Shock Absorbers

 

front

rear

extended length (mm)

475

525

compressed length (mm)

297

331

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI
Lift height: front 35mm, rear 40mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

TANIGUCHI 40mm Lift Premium Suspension Kit Jimny JB74 (2018-ON)

Regular price ¥206,900 ¥0 Unit price per

A Kit with Panhard rods and bump stops added to the Standard Plus Kit. Really highly recommended for those who are looking for even higher levels of driving performance. We recommend these products as the best all-round suspension kit for Jimny in Japan because they ensure a stable ride!

These Adjustable Shock Absorbers and Coil Springs are specifically designed by TANIGUCHI for new Jimny (2018-ON). Both computer simulations and off-road, high speed and city driving tests were conducted numerous times.
Dual-rate Coil Springs are always allowing for a stable and smooth ride. Shock Absorbers can be adjusted in 14 steps, enabling settings to suit various driving styles. And due to the long suspension travel and low center of gravity, it's also excellent on rough roads. Made in Japan.

TANIGUCHI suspensions are highly recommended as the best performance suspension for Jimny in Japan. They are designed from Jimny's vast data and technology by TANIGUCH's about 40 years of Jimny experience. They spend a lot of time testing these products with leading test drivers and these products are manufactured with top automobile makers. It is a high-performance suspension that has improved on-road and off-road driving performance, drive quality, and comfort more than the SUZUKI original ones.

Please note that these products are designed for a RHD (right-hand drive) Jimny, but it is possible to install them for a LHD (left-hand drive) as well except for the Front Panhard Rod. Actually, several of our LHD customers have already installed these products without any issues. If there is a difference in height between the left and right, please consider using the coil spacers. However, this has not been tested and may not work on all models. This product is designed so that the right side (driver's seat side) of RHD is slightly higher when no one is on board.

A) 40 mm Lift Standard Suspension Kit (141,600 JPY) includes Coil Springs, Shock Absorbers, and 50mm Extended Brake Hoses.
B) 40 mm Standard Plus Suspension Kit (163,600 JPY) includes Standard Kit plus two of Caster Correction Bushes 5.0, and Rear Panhard Rod Relocation Bracket.
C) 40 mm Lift Premium Suspension Kit (206,900 JPY) includes Standard Plus Kit plus Front and Rear Adjustable Panhard Rods, and X-Large Extended Bump Stops.

[ Required ]
- Remove front cross member or replace with Drop Cross Member

[ Required in some cases ]
- Headlight Leveler Fixed Stay or Adjustable Headlight Leveler Rod
- Stabilizer Relocation Bracketlock etc.

 

Coil Springs

free length (mm)

spring rate (N/mm)

FR 383.7 21.0 / 24.0

FL 

364

21.0 / 24.0

RR

351

23.0 / 25.0

RL

332

23.0 / 25.0

 Shock Absorbers

 

front

rear

extended length (mm)

475

525

compressed length (mm)

297

331

Applicable vehicles: Jimny (2018-present) JB74, 64 RHD (right handle drive)
Brand: TANIGUCHI
Lift height: front 35mm, rear 40mm (JB74)
Mounting: Professional (professional installation required)

About TANIGUCHI:
Our shop trusts "Off-Road Service TANIGUCHI" is Japan's best Jimny custom parts supplier. They have manufactured more than 300 Jimny products since 1983. Especially their suspensions and drivetrains are best-performance products. TANIGUCHI spends a lot of time testing its products with leading test drivers. Also, protection, interior, and exterior products have been highly evaluated for their superior quality and thoughtful construction.

Shipping calculated at checkout.

Stock: We have a lot of products in stock, but please note some of them are the manufacturer's stock. In that case, our shop will order them after receiving your order, so the order will take 4-6 business days to ship. Also, some others are on backorder or are made-to-order and may take several weeks or more.

Shipping Cost: Our shipping cost calculation system is imperfect, and the shipping quotes in your cart are estimates. Please be aware that there may be an additional shipping cost in some rare cases. In certain areas, shipping has been temporarily suspended, or delivery to certain areas might be difficult at the present.

Compatibility: Our products are designed for RHD (right-hand drive) and JDM (Japan Domestic Market). We hope that most of our products will fit international models and LHD (left-hand drive) as well but we have not tested the compatibility of some products. Please research for yourself and ensure that the part you are purchasing is compatible with your vehicle prior to ordering.

* Please contact us for further information before purchasing.